807 research outputs found
Compressed sensing electron tomography using adaptive dictionaries: a simulation study
Electron tomography (ET) is an increasingly important technique for examining the three-dimensional morphologies of nanostructures. ET involves the acquisition of a set of 2D projection images to be reconstructed into a volumetric image by solving an inverse problem. However, due to limitations in the acquisition process this inverse problem is considered ill-posed (i.e., no unique solution exists). Furthermore reconstruction usually suffers from missing wedge artifacts (e.g., star, fan, blurring, and elongation artifacts). Compressed sensing (CS) has recently been applied to ET and showed promising results for reducing missing wedge artifacts caused by limited angle sampling. CS uses a nonlinear reconstruction algorithm that employs image sparsity as a priori knowledge to improve the accuracy of density reconstruction from a relatively small number of projections compared to other reconstruction techniques. However, The performance of CS recovery depends heavily on the degree of sparsity of the reconstructed image in the selected transform domain. Prespecified transformations such as spatial gradients provide sparse image representation, while synthesising the sparsifying transform based on the properties of the particular specimen may give even sparser results and can extend the application of CS to specimens that can not be sparsely represented with other transforms such as Total variation (TV). In this work, we show that CS reconstruction in ET can be significantly improved by tailoring the sparsity representation using a sparse dictionary learning principle
The Influence Of Eighteenth-century British Landscape Aesthetics On Narrative And Pictorial Responses To The British North American North And West 1769-1872
This study undertakes a consideration of a century of travel writing by Britons who explored, surveyed, traded, hunted, prospected, botanized, and established missions in the British North American North and West between 1769 and 1872. Its particular concern is how Britons employed the principles and conventions of eighteenth-century British landscape aesthetics to describe and depict northern and western terrain.;An aesthetic mode of perceiving nature, as has been argued by perceptual geographers, art historians, and literary critics, constitutes one way that a society forms it understanding of reality. For the eighteenth- and early-nineteenth-century Briton, the Sublime and the Picturesque were the aesthetic modes of perception by which he described nature. When he travelled, these made up his aesthetic baggage. Their application to new lands told him where he stood aesthetically in relation to home landscapes just as his measurements of latitude and longitude told him where he stood spatially in relation to Greenwich.;Chapter I traces the formulation of the Sublime and the Picturesque through British aesthetic philosophy, painting, landscape gardening, and poetry. Chapter II deals with the journals of British mariners who searched for a Northwest Passage from 1819 to 1859, and includes discussions of works by Arctic fur traders. Chapter III treats the journals of Britons who travelled in the West. In each case, an attempt has been made to compile complete bibliographies of works published by the travellers or by modern editors.;Each work\u27s narrative and pictorial descriptions of landscape are considered for their adherence to and departure from the conventions of the Sublime and the Picturesque. As well, historical and biographical details of the author\u27s situation are considered when they impinge on his response to landscape. Although the understanding of the Sublime and the Picturesque was widespread, it was affected by other concerns. The fur trader looked for landscape qualities that promised the presence of beaver in a terrain. The prospector, the artist, the hunter, and the mariner sought particular landscape qualities as well. Taken together, the journals compile an aesthetic map of two regions in modern Canada
Growth and characterisation of titanium sulphide nanostructures by surface-assisted vapour transport methods; from trisulphide ribbons to disulphide nanosheets
Surface Assisted Chemical Vapour Transport (SACVT) methods have been employed to grow nanostructures of titanium disulphide (TiS2) and titanium trisulphide (TiS3). SACVT reactions occur between titanium and sulphur powders to form TiSx species transported in the vapour phase to grow nanometric flower-like structures on titanium-coated silica substrates. The evolution of structure and composition has been followed by powder X-ray diffraction, electron microscopy and Raman spectroscopy. At 1 : 2 Ti : S ratios, the size and shape of the hexagonal 1T-TiS2 titanium disulphide structures formed can be varied from flower-like growths with 'petals' formed from nanosheets 10 nm thick to platelets microns across. Increasing the proportion of sulphur (Ti : S 1 : 4) enables TiS3 flower-like structures composed of radiating nanoribbons to grow at elevated temperatures without decomposition to TiS2. TEM/SAED suggests that individual trisulphide ribbons grow along the [010] direction. Magnetic properties of the disulphide nanomaterials have been determined using SQUID magnetometry and Raman spectra for disulphides suggest that their crystal and electronic structures may be more complex than expected for bulk, stoichiometric, CdI2-structured TiS2
HREM studies of intergrowths in Sr2[Srn-1TinO3n+1] Ruddlesden-Popper phases synthesized by mechanochemical activation
A mechanochemical activation route has been applied in order to obtain the <i>n</i>=1–4 and ∞ members of the Sr<sub>2</sub>[Sr<sub>n</sub><sub>−1</sub>Ti<sub>n</sub>O<sub>3n+1</sub>] Ruddlesden–
Popper series from different (<i>n</i>+1)SrO:nTiO<sub>2</sub> mixtures. The mechanosynthesis of SrTiO<sub>3</sub> and Sr<sub>2</sub>TiO<sub>4</sub> was observed during the milling process
from the initial stoichiometric mixture, but in the cases of the <i>n</i>=2–4 members, a subsequent thermal treatment was needed. The synthesis
protocol of Sr<sub>3</sub>Ti<sub>2</sub>O<sub>7</sub> has been greatly improved and this compound can be isolated as a single, crystalline phase after annealing at 800°C. In the
case of Sr<sub>4</sub>Ti<sub>3</sub>O<sub>10</sub> and Sr<sub>5</sub>Ti<sub>4</sub>O<sub>13</sub>, the formation temperature was also decreased, but members with <i>n</i>=3 and 4 could not be isolated. Detailed
investigations using electron microscopy methods (TEM, HREM and SAED) were carried out in the samples corresponding to <i>n</i>=2–4. Although
a single ordered Sr<sub>3</sub>Ti<sub>2</sub>O<sub>7</sub> structure is dominant in the sample corresponding to <i>n</i>=2, a few intergrowths of other Ruddlesden–Popper phases were
observed. In the cases of <i>n</i>=3 and 4, the intergrowths of Ruddlesden–Popper phases are more frequent than in the <i>n</i>=2 composition and are
randomly distributed in the sample. The more frequent occurrence of such stacking faults, with increasing <i>n</i> value, leads to a somewhat disordered
layer stacking sequence
Shear-induced α → γ transformation in nanoscale Fe-C composite
High-resolution transmission electron microscopy and three-dimensional atom probe observations show clearly that a reverse transformation of body-centred cubic ferrite to face-centred cubic austenite occurs during severe plastic deformation of a pearlitic steel resulting in a nanocrystalline structure, something that never occurs in conventional deformation of coarse-grained iron and steels. The driving force and the mechanisms of this reverse transformation are discussed. It is shown that nanostructure and shear stresses are essential for this process, and the results confirm molecular dynamics predictions of such transformations in nanocrystalline iron
Linear chemically sensitive electron tomography using DualEELS and compressed sensing
No abstract available
The microstructure and microtexture of zirconium oxide films studied by transmission electron backscatter diffraction and automated crystal orientation mapping with transmission electron microscopy
A detailed characterization of nanostructured thin zirconium oxide films formed during aqueous corrosion of a nuclear-grade zirconium alloy (Zircaloy-4) has been carried out by means of two novel, ultra-high-spatial-resolution grain mapping techniques, namely automated crystal orientation mapping in the transmission electron microscope (TEM) and transmission electron backscatter diffraction (t-EBSD). While the former provided excellent spatial resolution with the ability to identify tetragonal ZrO<sub>2</sub> grains as small as ∼5 nm, the superior angular resolution and unambiguous indexing with t-EBSD enabled verification of the TEM observations. Both techniques revealed that in a stress-free condition (TEM foil prepared by focused ion beam milling), the oxide consists mainly of well-oriented columnar monoclinic grains with a high fraction of transformation twin boundaries, which indicates that the transformation from tetragonal to monoclinic ZrO<sub>2</sub> is a continuous process, and that a significant fraction of the columnar grains transformed from stress-stabilized tetragonal grains with (0 0 1) planes parallel to the metal–oxide interface. The TEM analysis also revealed a small fraction of size-stabilized, equiaxed tetragonal grains throughout the oxide. Those grains were found to show significant misalignment from the expected (0 0 1) growth direction, which explains the limited growth of those grains. The observations are discussed in the context of providing new insights into corrosion mechanisms of zirconium alloys, which is of particular importance for improving service life of fuel assemblies used in water-cooled reactors
The structure and possible origins of stacking faults in gamma-yttrium disilicate
Parallel stacking faults on (010) planes are frequently observed in hot-pressed Y2Si2O7. A combination of conventional dark-field imaging and high-resolution transmission electron microscopy was used to investigate the structure of these faults and it was found that they consist of the repeat of one layer of the two layer γ-Y2Si2O7 structure with an associated in-plane rigid body displacement. The resulting structure was confirmed by image simulation of high-resolution images from two perpendicular projections. A model for the formation of the stacking faults is proposed as a consequence of a transformation from β-Y2Si2O7 to γ-Y2Si2O7 in the hot pressing
- …