Obesity prevalence and time trend among youngsters in China, 1982-2002

Purpose of present study is to describe the prevalence and trend of overweight and obesity, as well as its coexistence with stunting, among youngsters in China, from 1982 to 2002. Data from children 7-17 years of age from three cross-sectional national surveys: 1982 China National Nutrition Survey (5 334 boys and 4 793 girls), 1992 China National Nutrition Survey (8 048 boys and 7 453 girls) and 2002 China National Nutrition and Health Survey (23 242 boys and 21 638 girls) were used in this study. Overweight and obesity were defined according to age, sex specific BMI cut-off points from the International Obesity Task Force, while stunting was defined as height-for-age below -2 standard deviation from the NCHS/WHO reference median value. Results: Overweight prevalence of Chinese youngsters was 1.2%, 3.7% and 4.4%, while the obesity prevalence was 0.2%, 0.9% and 0.9% in 1982, 1992 and 2002, respectively. Both the overweight and obesity prevalence and their increment were higher among boys in urban areas. In 1982, 28.4% of overweight and 69.6% of obese youngsters were stunted, this decreased to 22.0% and 46.4% in 1992, and then to 5.7% and 7.7% in 2002, respectively. Conclusion: The prevalence of overweight and obesity in Chinese youngsters were low in 1982. There has been a rapid increase since then. If this trend continues, overweight will soon reach epidemic proportions. Stunting among overweight and obese youngsters decreased dramatically at the same time

Effect of Carburizing and Shot Peening on the Microstructure and Surface Properties of 17-CrNi6-Mo Steel

Carburizing and shot peening are commonly accepted surface treatment methods used to improve the surface properties of materials. Researchers are making attempts to optimize their application for obtaining superior mechanical properties. However, there are few comprehensive reports on this problem. The combination of carburizing and shot peening is used for the surface treatment of 17-CrNi6-Mo steel. This is followed by detailed analysis employing optical and scanning electron microscopy, microhardness testing, surface roughness measurements, and the measurement of residual stresses using X-ray diffraction. The results show that shot peening can further improve the microstructure and surface properties of carburized specimens since it induced the phase transformation of a carburized layer. Moreover, simulation of the phase composition variation curve along with the change in the carbon content and the continuous cooling transformation (CCT) curve of the specimen is also presented. The results are used to elucidate the carburizing effect on a 17-CrNi6-Mo steel surface microstructure.Цементация и дробеструйная обработка общепринятые методы поверхностной обработки, используемые для улучшения поверхностных свойств материалов. Ученые проводят работы в направлении оптимизации их применения с целью обеспечения высоких механических свойств. Однако существует лишь несколько подробных исследований, посвященных их применению. Комбинацию цементации и дробеструйной обработки используют для поверхностной обработки стали 17-CrNi6-Mo. После обработки проводили подробный анализ поверхности материала с использованием оптической и сканирующей электронной микроскопии, измерений ее микротвердости и шероховатости, а также остаточных напряжений с помощью рентгенографии. Результаты показывают, что дробеструйная обработка может дополнительно улучшить микроструктуру и поверхностные свойства науглероженных образцов, поскольку она вызывает фазовое превращение науглероженного слоя. Выполнено моделирование кривой вариации фазового состава с одновременным изменением содержания углерода, а также кривой превращения при непрерывном охлаждении образца. Полученные результаты используются для установления эффекта влияния цементации на микроструктуру поверхности стали 17-CrNi6-Mo

Some effects of different constitutive laws on simulating mitral valve dynamics with FSI

In this paper, three different constitutive laws for mitral leaflets and two laws for chordae tendineae are selected to study their effects on mitral valve dynamics with fluid-structure interaction. We first fit these three mitral leaflet constitutive laws and two chordae tendineae laws with experimental data. The fluid-structure interaction is implemented in an immersed boundary framework with finite element extension for solid, that is the hybrid immersed boundary/finite element(IB/FE) method. We specifically compare the fluid-structure results of different constitutive laws since fluid-structure interaction is the physiological loading environment. This allows us to look at the peak jet velocity, the closure regurgitation volume, and the orifice area. Our numerical results show that different constitutive laws can affect mitral valve dynamics, such as the transvalvular flow rate, closure regurgitation and the orifice area, while the differences in fiber strain and stress are insignificant because all leaflet constitutive laws are fitted to the same set of experimental data. In addition, when an exponential constitutive law of chordae tendineae is used, a lower closure regurgitation flow is observed compared to that of a linear material model. In conclusion, combining numerical dynamic simulations and static experimental tests, we are able to identify suitable constitutive laws for dynamic behaviour of mitral leaflets and chordae under physiological conditions

Charmless Bs→PP,PV,VVB_s\to PP, PV, VV Decays Based on the six-quark Effective Hamiltonian with Strong Phase Effects II

We provide a systematic study of charmless $B_s \to PP, PV, VV$ decays ($P$ and $V$ denote pseudoscalar and vector mesons, respectively) based on an approximate six-quark operator effective Hamiltonian from QCD. The calculation of the relevant hard-scattering kernels is carried out, the resulting transition form factors are consistent with the results of QCD sum rule calculations. By taking into account important classes of power corrections involving "chirally-enhanced" terms and the vertex corrections as well as weak annihilation contributions with non-trivial strong phase, we present predictions for the branching ratios and CP asymmetries of $B_s$ decays into PP, PV and VV final states, and also for the corresponding polarization observables in VV final states. It is found that the weak annihilation contributions with non-trivial strong phase have remarkable effects on the observables in the color-suppressed and penguin-dominated decay modes. In addition, we discuss the SU(3) flavor symmetry and show that the symmetry relations are generally respected

Study on Free Vibration of Plates with Variable Thickness and a Hole Defect

The objective of this paper is to clarify the characteristics of vibration of plates with variable thickness and a hole defect by analytical and experimental methods. The vibration frequencies and modes obtained by the proposed discrete method are verified with the experimental results. Moreover, the effects of the thickness of plates, size of the defect on free vibration behavior of plates are also investigated

Bound state solutions of the Dirac-Rosen-Morse potential with spin and pseudospin symmetry

The energy spectra and the corresponding two- component spinor wavefunctions of the Dirac equation for the Rosen-Morse potential with spin and pseudospin symmetry are obtained. The $s-$wave ($\kappa = 0$ state) solutions for this problem are obtained by using the basic concept of the supersymmetric quantum mechanics approach and function analysis (standard approach) in the calculations. Under the spin symmetry and pseudospin symmetry, the energy equation and the corresponding two-component spinor wavefunctions for this potential and other special types of this potential are obtained. Extension of this result to $\kappa \neq 0$ state is suggested.Comment: 18 page

Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta

Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector, the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and (7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure

BESII Detector Simulation

A Monte Carlo program based on Geant3 has been developed for BESII detector simulation. The organization of the program is outlined, and the digitization procedure for simulating the response of various sub-detectors is described. Comparisons with data show that the performance of the program is generally satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM

Measurement of branching fractions for the inclusive Cabibbo-favored ~K*0(892) and Cabibbo-suppressed K*0(892) decays of neutral and charged D mesons

The branching fractions for the inclusive Cabibbo-favored ~K*0 and Cabibbo-suppressed K*0 decays of D mesons are measured based on a data sample of 33 pb-1 collected at and around the center-of-mass energy of 3.773 GeV with the BES-II detector at the BEPC collider. The branching fractions for the decays D+(0) -> ~K*0(892)X and D0 -> K*0(892)X are determined to be BF(D0 -> \~K*0X) = (8.7 +/- 4.0 +/- 1.2)%, BF(D+ -> ~K*0X) = (23.2 +/- 4.5 +/- 3.0)% and BF(D0 -> K*0X) = (2.8 +/- 1.2 +/- 0.4)%. An upper limit on the branching fraction at 90% C.L. for the decay D+ -> K*0(892)X is set to be BF(D+ -> K*0X) < 6.6%

Study of J/ψ→ωK+K−J/\psi \to \omega K^+K^-

New data are presented on $J/\psi \to \omega K^+K^-$ from a sample of 58M $J/\psi$ events in the upgraded BES II detector at the BEPC. There is a conspicuous signal for $f_0(1710) \to K^+K^-$ and a peak at higher mass which may be fitted with $f_2(2150) \to K\bar K$. From a combined analysis with $\omega \pi ^+ \pi ^-$ data, the branching ratio $BR(f_0(1710)\to\pi\pi)/BR(f_0(1710) \to K\bar K)$ is $< 0.11$ at the 95% confidence level.Comment: 11 pages, 5 figures. Submitted to Phys. Lett.