Aligned silver nanowires for plasmonically-enhanced fluorescence detection of photoactive proteins in wet and dry environment

We developed a method of aligning silver nanowires in a microchannel and fixing them to glass substrates via appropriate functionalization. The attachment of nanowires to the substrate is robust with no variation of their angles over minutes. Specific conjugation with photoactive proteins is observed using wide-field fluorescence imaging in real-time for highly concentrated protein solution, both in a microchannel and in a chip geometry. In the latter case we can detect the presence of the proteins in the dropcasted solution down to single proteins. The results point towards possible implementation of aligned silver nanowires as geometrically defined plasmonic fluorescence sensing platform

Spectral Selectivity of Plasmonic Interactions between Individual Up-Converting Nanocrystals and Spherical Gold Nanoparticles

We experimentally demonstrate strong spectral selectivity of plasmonic interaction that occurs between α-NaYF4:Er3+/Yb3+ nanocrystals, which feature two emission bands, and spherical gold nanoparticles, with plasmon frequency resonant with one of the emission bands. Spatially–resolved luminescence intensity maps acquired for individual nanocrystals, together with microsecond luminescence lifetime images, show two qualitatively different effects that result from the coupling between lasmon excitations in metallic nanoparticles and emitting states of the nanocrystals. On the one hand, we observe nanocrystals, whose emission intensity is strongly enhanced for both resonant and non-resonant bands with respect to the plasmon resonance. Importantly, this increase is accompanied with shortening of luminescence decays times. In contrast, a significant number of nanocrystals exhibits almost complete quenching of the emission resonant with the plasmon resonance of gold nanoparticles. Theoretical analysis indicates that such an effect can occur for emitters placed at distances of about 5 nm from gold nanoparticles. While under these conditions, both transitions experience significant increases of the radiative emission rates due to the Purcell effect, the non-radiative energy transfer between resonant bands results in strong quenching, which in that situation nullifies the enhancement

Symmetrical and unsymmetrical azomethines with thiophene core : structure - properties investigations

Unsymmetrical and symmetrical azomethines were obtained using the condensation reaction of diamino-thiophene-3,4 dicarboxylic acid diethyl ester with 4-(1-pyrrolidino)benzaldehyde, fluorene-2-carboxaldehyde, 1-methylindole-3-carboxaldehyde, and benzothiazole-2-carboxaldehyde. Their thermal, optical, and electrochemical properties were investigated, and the results were supported by calculations using the density functional theory. The studied compounds melted in the range of 170–260 °C and can be converted into amorphous materials with high glass transition temperatures between 76 and 135 °C. They were thermally stable up to 220–300 °C. All imines were electrochemically active and exhibited low energy band gaps below 2 eV (except for one imine with Eg = 2.39 eV) determined on the basis of cyclic voltammetry. Most of the azomethines were emissive in solution and in the solid state. Some of them showed both S1 (first excited state) emission and S2 (second excited state) emission or only fluorescence from higher excited state, which is first time observed for azomethines. The imine with the most promising properties was tested in a light-emitting diode, and its ability for emission of light under external voltage was demonstrated

Photoelectrochemical and thermal characterization of aromatic hydrocarbons substituted with a dicyanovinyl unit

Seven aromatic hydrocarbons bearing a dicyanovinyl unit were prepared to determine the relationship between both the number of aromatic rings and location of acceptor substituent on their thermal and optoelectronic properties. Additionally, the density functional theory calculations were performed. The obtained compounds showed temperatures of the beginning of thermal decomposition in the range of 137 – 289 °C, being above their respective melting points found between 88 and 248 °C. They were electrochemically active and showed quasi-reversible reduction process (except for 2-(phen-1- yl)methylene)malononitrile). Electrochemically estimated energy band gaps were below 3.0 eV, in the range of 2.10 – 2.50 eV. The absorption and emission spectra were recorded in CHCl3 and NMP and in solid state. All compounds strongly absorbed radiation with absorption maximum ranging from 307 to 454 nm ascribed to the intramolecular charge transfer between the donor and acceptor units. The aromatic hydrocarbons were luminescent in all investigated media and exhibited higher photoluminescence quantum yields in the solid state due to the aggregation induced emission phenomena. Electroluminescence ability of selected compounds was tested in a diode with guest-host configuration. Additionally, the selected compound together with a commercial N719 was applied in the dye-sensitized solar cell

Wide-range Angle-sensitive Plasmonic Color Printing on Lossy-Resonator Substrates

We demonstrate a sustainable, lithography-free process for generating non fading plasmonic colors with a prototype device that produces a wide range of vivid colors in red, green, and blue (RGB) ([0-1], [0-1], [0-1]) color space from violet (0.7, 0.72, 1) to blue (0.31, 0.80, 1) and from green (0.84, 1, 0.58) to orange (1, 0.58, 0.46). The proposed color-printing device architecture integrates a semi-transparent random metal film (RMF) with a metal back mirror to create a lossy asymmetric Fabry-P\'erot resonator. This device geometry allows for advanced control of the observed color through the five-degree multiplexing (RGB color space, angle, and polarization sensitivity). An extended color palette is then obtained through photomodification process and localized heating of the RMF layer under various femtosecond laser illumination conditions at the wavelengths of 400 nm and 800 nm. Colorful design samples with total areas up to 10 mm2 and 100 {\mu}m resolution are printed on 300-nm-thick films to demonstrate macroscopic high-resolution color generation. The proposed printing approach can be extended to other applications including laser marking, anti-counterfeiting and chromo-encryption

1,8-Naphthalimides 3-substituted with imine or β-ketoenamine unit evaluated as compounds for organic electronics and cell imaging

In this paper, we describe both new as well as described in our previous works 1,8- naphthalimide derivatives substituted at the 3-C position with imine or -ketoenamine unitin order to demonstrate a broader scope of research enabling of analysis between the structureproperties relationship relevant to the application of these compounds in organic electronics and cellular imaging. Thermal, physicochemical, optical, electrochemical, electroluminescence, and biological properties of a series of derivatives containing the 1,8-naphthalimideunit were tested and compared. This allowed the determination of impact of substituents in the imide part (hexylamine, phenylethyl, benzyl, fluorobenzyl, methylbenzyl), type of bond (imine or ketoenamine) as well as the substituent on the naphthalene ring (2-hydroxyphenyl, 5-bromo-2- hydroxyphenyl, 3,5-diodo-2-hydroxyphenyl, pyrimidines) on their properties. Moreover, the properties in the aggregating state were tested in the MeOH/PBS system. Imines are susceptible to the hydrolysis process and aggregation-caused photoluminescence quenching(ACQ). In turn,-ketoenamine shown excited-state intramolecular proton transfer promoted by aggregation (AIEE). Our studies can be helpful in the further design of compounds containing the 1,8- naphthalimide structure for various applications

Luminescence and electrochemical activity of new unsymmetrical 3- imino-1,8-naphthalimide derivatives

A new series of 1,8-naphtalimides containing an imine bond at the 3-position of the naphthalene ring was synthesized using 1H, 13C NMR, FTIR, and elementary analysis. The impact of the substituent in the imine linkage on the selected properties and bioimaging of the synthesized compounds was studied. They showed a melting temperature in the range of 120–164 C and underwent thermal decomposition above 280 C. Based on cyclic and differential pulse voltammetry, the electrochemical behavior of 1,8-naphtalimide derivatives was evaluated. The electrochemical reduction and oxidation processes were observed. The compounds were characterized by a low energy band gap (below 2.60 eV). Their photoluminescence activities were investigated in solution considering the solvent effect, in the aggregated and thin film, and a mixture of poly(N-vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt.%). They demonstrated low emissions due to photoinduced electron transport (PET) occurring in the solution and aggregation, which caused photoluminescence quenching. Some of them exhibited light emission as thin films. They emitted light in the range of 495 to 535 nm, with photoluminescence quantum yield at 4%. Despite the significant overlapping of its absorption range with emission of the PVK:PBD, incomplete Förster energy transfer from the matrix to the luminophore was found. Moreover, its luminescence ability induced by external voltage was tested in the diode with guest–host configuration. The possibility of compound hydrolysis due to the presence of the imine bond was also discussed, which could be of importance in biological studies that evaluate 3-imino-1,8-naphatalimides as imaging tools and fluorescent materials for diagnostic applications and molecular bioimaging

New acceptor-donor-acceptor systems based on bis-(imino-1,8- naphthalimide)

In this paper, six novel symmetrical bis-(imino-1,8-naphthalimides) differing in core and N-substituent structure were synthesized, and their thermal (TGA, DSC), optical (UV-Vis, PL), electrochemical (DPV, CV) properties were evaluated. The compounds were stable to 280 C and could be transferred into amorphous materials. Electrochemical investigations showed their ability to occur reductions and oxidations processes. They exhibited deep LUMO levels of about -3.22 eV and HOMO levels above -5.80 eV. The optical investigations were carried out in the solutions (polar and non-polar) and in films and blends with PVK:PBD. Bis-(imino-1,8-naphthalimides) absorbed electromagnetic radiation in the range of 243–415 nm and emitted light from blue to yellow. Their capacity for light emission under voltage was preliminarily tested in devices with an active layer consisting of a neat compound and a blend with PVK:PBD. The diodes emitted green or red light

Ground- and excited-state properties of Re(I) carbonyl complexes - effect of triimine ligand core and appended heteroaromatic groups

In this work, a series of six rhenium(I) complexes bearing 2,2′ :6′ ,2′′ -terpyridine (terpy), 2,6-di(thiazol-2-yl)pyridine (dtpy), and 2,6-di(pyrazin-2-yl)pyridine (dppy) with appended quinolin-2-yl and N-ethylcarbazol-3-yl groups were prepared and spectroscopically investigated to evaluate the photophysical consequences of both the trisheterocyclic core (terpy, dtpy and dppy) and the heterocyclic substituent. The [ReCl(CO)3(Ln-κ2N)] complexes are regarded as ideal candidates for getting structure–property relationships, while terpy-like framework represents an excellent structural backbone for structural modifications. The replacement of the peripheral pyridine rings of 2,2′ :6′ ,2′′ -terpyridine by thiazoles and pyrazines resulted in a significant red-shift of the absorption and emission of [ReCl(CO)3(Ln-κ2N)] due to stabilization of the ligand-centred LUMO orbital. Both quinoline and Nethylcarbazole are extended π-conjugation organic chromophores, but they differ in electron-donating abilities. The low-energy absorption band of Re(I) complexes with the triimine ligands bearing quinolin-2-yl group was contributed by the metal-to-ligand charge-transfer (MLCT) electronic transitions. The introduction of electrondonating N-ethylcarbazol-3-yl substituent into the triimine acceptor core resulted in the change of the character of the HOMO of Re(I) complexes and a significant increase of molar absorption coefficients of the longwavelength absorption, which was assigned to a combination of 1MLCT and 1ILCT (intraligand chargetransfer) transitions. Regardless of the appended heteroaromatic group, the emitting excited state of Re(I) terpy-based complexes was demonstrated to have predominant 3MLCT character, as evidenced by comprehensive studies including static and time-resolved emission spectroscopy along with ultrafast transient absorption measurements. The diodes with Re(I) complexes dispersed molecularly in a PVK:PBD matrix were emissive andeffects of the complex structure on colour of emitted light and its intensity was pronounced