HPLC Method for Determination of Rifaximin in Human Plasma Using Tandem Mass Spectrometry Detection

The present study was aimed at developing a simple, sensitive, and specific liquid chromatography–tandem mass spectrometry method for the quantification of rifaximin in human plasma using rifaximin D6 as internal standard. Chromatographic separation was performed on Zorbax SB C18, 4.6 x 75 mm, 3.5 μm column with an isocratic mobile phase composed of 10 mM ammonium formate (pH 4.0) and acetonitrile in the ratio of (20:80 v/v), at a flow-rate of 0.3 mL/min. Rifaximin and rifaximin D6 were detected with proton adducts at m/z 786.4 → 754.4 and 792.5 → 760.5 in multiple reaction monitoring positive mode respectively. The acidified samples were subjected to liquid–liquid extraction using a mixture of methyl t-butyl ether - dichloromethane (75: 25) followed by centrifugation, nitrogen-aided evaporation and reconstitution. The method was validated over a linear concentration range of 20 - 20000 pg/mL with correlation coefficient of more than 0.9995. This method demonstrated intra and inter-day precision within 0.6 - 2.6% and 2.2 - 5.6%, and accuracy within 95.7 - 104.2% and 95.8 - 105.0% for rifaximin, respectively. Rifaximin was found to be stable throughout freeze–thawing cycles, bench top and postoperative stability studies. This method was applied successfully for the analysis of blood samples following oral administration of rifaximin (200 mg) in 17 healthy Indian male human volunteers under fasting conditions.Keywords: Bioequivalence, mass spectrometry, rifaximinEast and Central African Journal of Pharmaceutical Sciences Vol. 13 (2010) 78-8

Direct observation of growth and collapse of a Bose-Einstein condensate with attractive interactions

The dynamical behavior of Bose-Einstein condensation (BEC) in a gas with attractive interactions is striking. Quantum theory predicts that BEC of a spatially homogeneous gas with attractive interactions is precluded by a conventional phase transition into either a liquid or solid. When confined to a trap, however, such a condensate can form provided that its occupation number does not exceed a limiting value. The stability limit is determined by a balance between self-attraction and a repulsion arising from position-momentum uncertainty under conditions of spatial confinement. Near the stability limit, self-attraction can overwhelm the repulsion, causing the condensate to collapse. Growth of the condensate, therefore, is punctuated by intermittent collapses, which are triggered either by macroscopic quantum tunneling or thermal fluctuation. Previous observation of growth and collapse has been hampered by the stochastic nature of these mechanisms. Here we reduce the stochasticity by controlling the initial number of condensate atoms using a two-photon transition to a diatomic molecular state. This enables us to obtain the first direct observation of the growth of a condensate with attractive interactions and its subsequent collapse.Comment: 10 PDF pages, 5 figures (2 color), 19 references, to appear in Nature Dec. 7 200

Parameter identification problems in the modelling of cell motility

We present a novel parameter identification algorithm for the estimation of parameters in models of cell motility using imaging data of migrating cells. Two alternative formulations of the objective functional that measures the difference between the computed and observed data are proposed and the parameter identification problem is formulated as a minimisation problem of nonlinear least squares type. A Levenberg–Marquardt based optimisation method is applied to the solution of the minimisation problem and the details of the implementation are discussed. A number of numerical experiments are presented which illustrate the robustness of the algorithm to parameter identification in the presence of large deformations and noisy data and parameter identification in three dimensional models of cell motility. An application to experimental data is also presented in which we seek to identify parameters in a model for the monopolar growth of fission yeast cells using experimental imaging data. Our numerical tests allow us to compare the method with the two different formulations of the objective functional and we conclude that the results with both objective functionals seem to agree

Unbalanced Holographic Superconductors and Spintronics

We present a minimal holographic model for s-wave superconductivity with unbalanced Fermi mixtures, in 2+1 dimensions at strong coupling. The breaking of a U(1)_A "charge" symmetry is driven by a non-trivial profile for a charged scalar field in a charged asymptotically AdS_4 black hole. The chemical potential imbalance is implemented by turning on the temporal component of a U(1)_B "spin" field under which the scalar field is uncharged. We study the phase diagram of the model and comment on the eventual (non) occurrence of LOFF-like inhomogeneous superconducting phases. Moreover, we study "charge" and "spin" transport, implementing a holographic realization (and a generalization thereof to superconducting setups) of Mott's two-current model which provides the theoretical basis of modern spintronics. Finally we comment on possible string or M-theory embeddings of our model and its higher dimensional generalizations, within consistent Kaluza-Klein truncations and brane-anti brane setups.Comment: 45 pages, 15 figures; v2: two paragraphs below eq. (3.1) slightly modified, figure 5 (left) replaced, references added; v3: typos corrected, comments added, figure 12 replace

Artificial tektites: an experimental technique for capturing the shapes of spinning drops

Determining the shapes of a rotating liquid droplet bound by surface tension is an archetypal problem in the study of the equilibrium shapes of a spinning and charged droplet, a problem that unites models of the stability of the atomic nucleus with the shapes of astronomical-scale, gravitationally-bound masses. The shapes of highly deformed droplets and their stability must be calculated numerically. Although the accuracy of such models has increased with the use of progressively more sophisticated computational techniques and increases in computing power, direct experimental verification is still lacking. Here we present an experimental technique for making wax models of these shapes using diamagnetic levitation. The wax models resemble splash-form tektites, glassy stones formed from molten rock ejected from asteroid impacts. Many tektites have elongated or ‘dumb-bell’ shapes due to their rotation mid-flight before solidification, just as we observe here. Measurements of the dimensions of our wax ‘artificial tektites’ show good agreement with equilibrium shapes calculated by our numerical model, and with previous models. These wax models provide the first direct experimental validation for numerical models of the equilibrium shapes of spinning droplets, of importance to fundamental physics and also to studies of tektite formation

Holographic Derivation of Kerr-Newman Scattering Amplitudes for General Charge and Spin

Near-superradiant scattering of charged scalars and fermions by a near-extreme Kerr-Newman black hole and photons and gravitons by a near-extreme Kerr black hole are computed as certain Fourier transforms of correlators in a two-dimensional conformal field theory. The results agree with the classic spacetime calculations from the 1970s, thereby providing good evidence for a conjectured Kerr-Newman/CFT correspondence.Comment: 22 page

Brainstem Respiratory Oscillators Develop Independently of Neuronal Migration Defects in the Wnt/PCP Mouse Mutant looptail

The proper development and maturation of neuronal circuits require precise migration of component neurons from their birthplace (germinal zone) to their final positions. Little is known about the effects of aberrant neuronal position on the functioning of organized neuronal groups, especially in mammals. Here, we investigated the formation and properties of brainstem respiratory neurons in looptail (Lp) mutant mice in which facial motor neurons closely apposed to some respiratory neurons fail to migrate due to loss of function of the Wnt/Planar Cell Polarity (PCP) protein Vangl2. Using calcium imaging and immunostaining on embryonic hindbrain preparations, we found that respiratory neurons constituting the embryonic parafacial oscillator (e-pF) settled at the ventral surface of the medulla in Vangl2Lp/+ and Vangl2Lp/Lp embryos despite the failure of tangential migration of its normally adjacent facial motor nucleus. Anatomically, the e-pF neurons were displaced medially in Lp/+ embryos and rostro-medially Lp/Lp embryos. Pharmacological treatments showed that the e-pF oscillator exhibited characteristic network properties in both Lp/+ and Lp/Lp embryos. Furthermore, using hindbrain slices, we found that the other respiratory oscillator, the preBötzinger complex, was also anatomically and functionally established in Lp mutants. Importantly, the displaced e-pF oscillator established functional connections with the preBötC oscillator in Lp/+ mutants. Our data highlight the robustness of the developmental processes that assemble the neuronal networks mediating an essential physiological function

Interference management for moving networks in ultra-dense urban scenarios

The number of users relying on broadband wireless connectivity while riding public transportation vehicles is increasing significantly. One of the promising solutions is to deploy moving base stations on public transportation vehicles to form moving networks (MNs) that serve these vehicular users inside the vehicles. In this study, we investigated the benefits and challenges in deploying MNs in ultra-dense urban scenarios. We identified that the key challenge limiting the performance of MNs in ultra-dense urban scenarios is inter-cell interference, which is exacerbated by the urban canyon effects. To address this challenge, we evaluated different inter-cell interference coordination and multi-antenna interference suppression techniques for MNs. We showed that in using MNs together with effective interference management approaches, the quality of service for users in vehicles can be significantly improved, with negligible impacts on the performance of regular outdoor users

Lattice Boltzmann simulations of soft matter systems

This article concerns numerical simulations of the dynamics of particles immersed in a continuum solvent. As prototypical systems, we consider colloidal dispersions of spherical particles and solutions of uncharged polymers. After a brief explanation of the concept of hydrodynamic interactions, we give a general overview over the various simulation methods that have been developed to cope with the resulting computational problems. We then focus on the approach we have developed, which couples a system of particles to a lattice Boltzmann model representing the solvent degrees of freedom. The standard D3Q19 lattice Boltzmann model is derived and explained in depth, followed by a detailed discussion of complementary methods for the coupling of solvent and solute. Colloidal dispersions are best described in terms of extended particles with appropriate boundary conditions at the surfaces, while particles with internal degrees of freedom are easier to simulate as an arrangement of mass points with frictional coupling to the solvent. In both cases, particular care has been taken to simulate thermal fluctuations in a consistent way. The usefulness of this methodology is illustrated by studies from our own research, where the dynamics of colloidal and polymeric systems has been investigated in both equilibrium and nonequilibrium situations.Comment: Review article, submitted to Advances in Polymer Science. 16 figures, 76 page

Foundations of Black Hole Accretion Disk Theory

This review covers the main aspects of black hole accretion disk theory. We begin with the view that one of the main goals of the theory is to better understand the nature of black holes themselves. In this light we discuss how accretion disks might reveal some of the unique signatures of strong gravity: the event horizon, the innermost stable circular orbit, and the ergosphere. We then review, from a first-principles perspective, the physical processes at play in accretion disks. This leads us to the four primary accretion disk models that we review: Polish doughnuts (thick disks), Shakura-Sunyaev (thin) disks, slim disks, and advection-dominated accretion flows (ADAFs). After presenting the models we discuss issues of stability, oscillations, and jets. Following our review of the analytic work, we take a parallel approach in reviewing numerical studies of black hole accretion disks. We finish with a few select applications that highlight particular astrophysical applications: measurements of black hole mass and spin, black hole vs. neutron star accretion disks, black hole accretion disk spectral states, and quasi-periodic oscillations (QPOs).Comment: 91 pages, 23 figures, final published version available at http://www.livingreviews.org/lrr-2013-