Evaluation of the maxillary premolar roots dissociation using radiographic holders with conventional and digital radiography

This in vivo study evaluated the dissociation quality of maxillary premolar roots combining variations of vertical and horizontal angulations by using X-ray holders (Rinn -XCP), and made a comparison between two types of intraoral radiography systems - conventional film (Kodak Insight, Rochester, USA) and digital radiography (Kodak RVG 6100, Kodak, Rochester, USA). The study sample was comprised of 20 patients with a total of 20 maxillary premolars that were radiographed, using the paralleling angle technique (GP), with a 20º variation of the horizontal angle (GM) and 25º variation of the horizontal angle combined with 15º vertical angle (GMV). Each image was independently analyzed by two experienced examiners. These examiners assigned a score to the diagnostic capability of root dissociation and the measurement of the distance between the apexes. Statistical data was derived using the Wilcoxon Signed Rank test, Friedman and T test. The means of the measured distances between buccal and lingual root apexes were greater for the GMV, which ranged from 2.3 mm to 3.3 mm. A statistically significant difference was found between GM and GMV when compared to GP with p < 0.01. An established best diagnostic dissociation roots image was found in the GMV. These results support the use of the anterior X-ray holders which offer a better combined deviation (GMV) to dissociate maxillary premolar roots in both radiography systems

Ex vivo analysis of root canal cleaning using Endo-PTC associated to NaOCl and different irrigant solutions

The aim of this study was to assess qualitatively, by means of SEM images, the cleaning of the dentin walls of root canals after chemical-surgical preparation using Endo-PTC cream with 0.5% and 1% sodium hypochlorite and different final irrigating solutions. Seventy-two single-rooted human teeth were divided into eight groups and prepared using Endo-PTC cream with sodium hypochlorite (NaOCl) at different concentrations, and irrigated with NaOCl at different concentrations. Final irrigation was performed with either EDTA-T or EDTA-C. The best results were obtained with Group 1, followed by Groups 5, 2, 7, 8, 3, 6 and 4. We can conclude that the use of 0.5% NaOCl during instrumentation and final flush of the root canals was more efficient in cleaning than was 1% sodium hypochlorite. EDTA-T was more efficient in removing smear layer than EDTA-C, and the cervical third presented better cleaning of the root canal walls than did the middle third, which showed cleaner dentin walls than the apical third

Optical magnification has no benefits on the detection of occlusal caries lesions in permanent molars using different visual scoring systems : an in vitro study

Some studies have addressed the influence of optical magnification on the detection of caries lesions using a visual scoring system. However, there is a lack of research related to the use of the CAST and ADA-CCS visual scoring systems. In addition, the reliability and accuracy of ADA-CCS index in permanent teeth were not studied yet. So, the aim of this study was to evaluate, in vitro, the influence of different levels of optical magnification on the detection of occlusal caries lesions in permanent molars using three visual scoring systems. One occlusal site per tooth was analyzed in 120 extracted permanent molars. Two trained examiners inspected the teeth using ICDAS (International Caries Detection and Assessment System), CAST (Caries Assessment Spectrum and Treatment), and ADA-CCS (American Dental Association-Caries Classification System) visual criteria, twice with each scoring system, with a one-week interval between examinations. The study was conducted in three phases: (A) without optical magnification, (B) using a binocular lens (3.5× magnification), and (C) using an operating microscope (16× magnification). Then, the teeth were sectioned longitudinally through the center of the selected site and the section with the more severe lesion was histological evaluated considering the D1 (lesions in enamel and dentin) and D3 (dentin lesions) thresholds. Kappa values for intra- and inter-examiner reproducibility were good to excellent for all systems. At the D1 threshold, sensitivity, accuracy, and area under the ROC curve were high for ICDAS and CAST in all phases. However, this was not the case for the ADA-CCS in phase C (0.05). The magnification does not improve the accuracy of the visual scoring systems in the detection of occlusal caries lesions in permanent molars

Physicochemical properties and filling capacity of an experimental iodoform-based paste in primary teeth

In this study, we evaluated the physicochemical properties (PCP; radiopacity, flow, pH, and solubility) and the quality of root canal filling provided by an experimental industrialized paste (EP), with the same active ingredients as those of the Guedes Pinto paste, compared with the Vitapex® paste. PCP were analyzed according to the ANSI/ADA laboratory testing methods for endodontic filling and sealing materials. To analyze filling capacity, 120 artificial primary teeth (60 maxillary incisors [MIs] and 60 mandibulary molars [MMs]) were endodontically treated. The teeth were divided into eight groups based on the dental group (MIs or MMs), filling material (Vitapex® or EP), and insertion method (syringe or lentulo). The Image J® software was used to analyze the initial an final digital radiographies of each tooth, measuring and comparing root canal and void areas. The percentage of filling failure areas was obtained. Data were submitted to ANOVA and Tukey test of mean comparison. Regarding PCP, both pastes presented results according the ANSI/ADA standards. Flow capacity: Vitapex: 19.6 mm, EP: 25 mm (p 0.05). Regarding filling capacity analysis, EP demonstrated 12.5% of failure against 31.5% of Vitapex (p < 0.01). Compared to Vitapex, EP presented statistically significantly better results in flow, radiopacity, pH, and filling capacity. Molars presented more filling failures than incisors. The insertion method using a syringe and a thin tip was significantly better than that using Lentulo spiral carriers.info:eu-repo/semantics/publishedVersio

Influence of prior 810-nm-diode intracanal laser irradiation on hydrophilic resin-based sealer obturation

Dentin wall structural changes caused by 810-nm-diode laser irradiation can influence the sealing ability of endodontic sealers. The objective of this study was to evaluate the apical leakage of AH Plus and RealSeal resin-based sealers with and without prior diode laser irradiation. Fifty-two single-rooted mandibular premolars were prepared and divided into 4 groups, according to the endodontic sealer used and the use or non-use of laser irradiation. The protocol for laser irradiation was 2.5W, continuous wave in scanning mode, with 4 exposures per tooth. After sample preparation, apical leakage of 50% ammoniacal silver nitrate impregnation was analyzed. When the teeth were not exposed to irradiation, the Real Seal sealer achieved the highest scores, showing the least leakage, with significant differences at the 5% level (Kruskal-Wallis test, p = 0.0004), compared with AH Plus. When the teeth were exposed to the 810-nm-diode laser irradiation, the sealing ability of AH Plus sealer was improved (p = 0282). In the Real Seal groups, the intracanal laser irradiation did not interfere with the leakage index, showing similar results in the GRS and GRSd groups (p = 0.1009)

Temperature changes on the root surfaces of mandibular incisors after an 810-nm high-intensity intracanal diode laser irradiation

Temperature changes caused by laser irradiation can promote damage to the surrounding dental tissues. In this study, we evaluated the temperature changes of recently extracted human mandibular incisors during intracanal irradiation with an 810-nm diode laser at different settings. Fifty mandibular incisors were enlarged up to an apical size of ISO No. 40 file. After the final rinse with 17% ethylenediaminetetraacetic acid, 0.2% lauryl sodium sulfate biologic detergent, and sterile water, samples were irradiated with circular movements from apex to crown through five different settings of output power (1.5, 2.0, 2.5, 3.0, and 3.5 W) in continuous mode. The temperature changes were measured on both sides of the apical and middle root thirds using two thermopar devices. A temperature increase of 7 degrees C was considered acceptable as a safe threshold when applying the diode laser. Results: The results showed that only 3.5-W output power increased the outer surface temperature above the critical value. Conclusion: The recommended output power can be stipulated as equal to or less than 3 W to avoid overheating during diode laser irradiation on thin dentin walls. (c) 2012 Society of Photo-Optical Instrumentation Engineers (SPIE). [DOI: 10.1117/1.JBO.17.1.015006

Quality analysis of the apical seal of root canals irradiated with Nd: YAG, diode or Er: YAG lasers and filled with AH Plus, EndoREZ®, Epiphany® or Epiphany SE® resin based sealers

O objetivo deste estudo foi analisar a influência da irradiação com lasers de alta intensidade antes da obturação de canais radiculares com cimentos endodônticos resinosos no selamento apical. Raízes permanentes humanas (n=168) foram endodonticamente tratadas e, então, divididas aleatoriamente em quatro grupos experimentais (n=42), de acordo com o tratamento dentinário subsequente. Os grupos foram: GØ (controle) sem tratamento adicional; GN irradiado com o laser de Nd:YAG (1,5 W, 100 mJ, 15 Hz); GD irradiado com o laser de diodo (2,5 W em modo contínuo); GE irradiado com o laser de Er:YAG (1 W, 100 mJ, 10 Hz). Dois espécimes de cada grupo foram preparados para avaliação em microscopia eletrônica de varredura (MEV) convencional para observação morfológica da superfície dentinária apical. Os espécimes remanescentes de cada grupo foram aleatoriamente divididos em quatro subgrupos (n=10), de acordo com o cimento obturador utilizado (AH Plus, EndoREZ®, Epiphany® ou Epiphany SE®). Para a análise de infiltração, os espécimes foram imersos em solução amoniacal de nitrato de prata a 50 % (pH=9,5) por 24 horas. Os valores de infiltração apical, em mm, foram comparados pela ANOVA, seguido pelo teste de Tukey (p<0,05). Cinco secções de cada subgrupo foram aleatoriamente selecionadas e analisadas em MEV em modo ambiental para avaliar a adaptação e penetração do material obturador nas paredes dentinárias. As imagens em MEV ambiental foram classificadas em escores por três avaliadores calibrados. A concordância interexaminadores foi confirmada pelo teste Kappa e os escores foram comparados pelo teste de Kruskal-Wallis (p<0.05). No grupo controle, o cimento EndoREZ® apresentou infiltração de nitrato de prata significantemente menor que todos os outros cimentos (p<0,05), com exceção do Epiphany®. A irradiação com os lasers de Nd:YAG e de diodo diminuiu a infiltração média dos subgrupos obturados com o cimento AH Plus (p<0,05). A irradiação com o laser de Nd:YAG levou a um aumento do nível de infiltração nos subgrupos obturados com EndoREZ® e Epiphany SE®. A adaptação, bem como a penetração dos cimentos, não foram prejudicadas pela prévia irradiação com laser dos canais radiculares, independentemente do laser utilizado.The aim of this study was to analyze the influence of intracanal high intensity laser irradiation prior to root canal filling with resin based endodontic sealers on the apical sealing. Human dental roots (n=168) were endodontically treated and then randomly divided into four experimental groups (n=42), according to the further dentin surface treatment. The groups were: control (GØ) received no further treatment; GN irradiated with Nd:YAG laser (1.5 W, 100 mJ, 15 Hz); GD irradiated with diode laser (2.5 W in continuous way) and GE irradiated with Er:YAG laser (1 W, 100 mJ, 10 Hz). Two specimens of each group were prepared for conventional scanning electron microscopy (SEM) for morphological observation of the apical dentin surface. The remaining specimens of each group were randomly divided into four subgroups (n=10), according to the sealer used for dental root filling as follows: AH Plus, EndoREZ®, Epiphany® or Epiphany SE®. For leakage analysis, the specimens were immersed into 50 % silver nitrate ammoniacal solution (pH = 9.5) for 24 hours. The values of apical leakage, in mm, were compared by ANOVA followed by Tukeys test (p<0,05). Five sections of each subgroup were randomly selected and analyzed using environmental SEM in order to evaluate the adaptation and penetration of the filling material into the dentin walls. The environmental SEM images were scored by three calibrated examiners. The inter-examiners agreement was confirmed by Kappa test and the scores were compared by Kruskal-Wallis test (p<0.05). At the control group, the EndoREZ® sealer led to significantly smaller silver nitrate leakage in comparison to the others sealers (p<0,05), except by Epiphany®. The irradiation with Nd:YAG and diode lasers reduced the mean leakage of the subgroups filled with AH Plus sealer (p<0,05). Nd:YAG laser irradiation led to a leakage level increase of the subgroups filled with EndoREZ® and Epiphany SE®. The adaptation as well as sealer penetration were not impaired by the root canal prior laser irradiation, independently of the laser used

Apical Leakage of Three Resin-Based Endodontic Sealers after 810-nm-Diode Laser Irradiation

Objective: To evaluate the influence of 810-nm-diode laser irradiation, applied before root canal filling, on apical sealing ability of three different resin-based sealers (AH Plus, EndoRez, and RealSeal). Background: Lasers have been widely used in endodontics. The dentin wall changes caused by laser irradiation could improve the sealing ability of endodontic cements. Methods: Sixty single-rooted human teeth were divided into six groups, according to the endodontic sealer used and previous 810-nm-diode laser irradiation. The protocol for laser irradiation was 2.5W in a continuous wave, in scanning mode, with four irradiations per tooth. After sample preparation, they were analyzed according to apical leakage with silver nitrate impregnation. Results: The RealSeal sealer achieved minimum leakage rates (1.24 mm), with significant differences at the 1% level (Tukey's test, p < 0.01) from AH Plus (1.84 mm) in nonirradiated groups. When the laser was used, there were also significant differences at the 5% level (p < 0.05) between irradiated groups (1.31 and 1.78 mm, respectively). Conclusion: The 810-nm-diode laser irradiation did not promote significant differences in apical leakage