191 research outputs found
Highly efficient planar perovskite solar cells through band alignment engineering
The simplification of perovskite solar cells (PSCs), by replacing the mesoporous electron selective layer (ESL) with a planar one, is advantageous for large-scale manufacturing. PSCs with a planar TiO2 ESL have been demonstrated, but these exhibit unstabilized power conversion efficiencies (PCEs). Herein we show that planar PSCs using TiO2 are inherently limited due to conduction band misalignment and demonstrate, with a variety of characterization techniques, for the first time that SnO2 achieves a barrier-free energetic configuration, obtaining almost hysteresis-free PCEs of over 18% with record high voltages of up to 1.19 V
Increasing efficiency of perovskite solar cells using low concentrating photovoltaic systems
This is the final version. Available from Royal Society of Chemistry via the DOI in this record. Perovskite solar cell (PSC) technology is the flag bearer for the future of photovoltaics allowing unlimited possibilities for its application. This technology is currently limited by issues related to its scale-up, stability and the composition of the materials used in its preparation. Using small sized solar cells with higher efficiency under solar concentration is gaining traction as a methodology for scaling up this technology and broadening its applications. However, this has only been reported in devices with size <1 mm2 neglecting the series resistance of the device. Here, we report the performance of a 9 mm2 PSC at varying solar concentration levels and correlate it with the series resistance of the solar cell. The n–i–p structured device using a triple cation perovskite absorber with a mesoporous titanium oxide/SnO2 layer as the electron transporting layer and Spiro-OMeTAD as the hole transporting material achieved a peak efficiency of 21.6% under 1.78 Suns as compared to the 21% obtained under 1 Sun (1000W m−2) and AM1.5G. We further boosted the power output up to 15.88 mW under 10.7 Suns compared to the 1.88 mW obtained under 1 Sun; however this results in an actual efficiency drop of the PSC owing to the device series resistance. Further, we investigated the impact of the increasing solar cell temperature at higher concentration levels and identified the influence of series resistance on the performance of the PSC. Our work identifies the potential of concentrating photovoltaics and highlights the challenges and makes recommendations for future development.EPSRCEuropean Union's Horizon 202
Formation of artificial pores in nano-TiO2 photo-electrode films using acetylene-black for high-efficiency, dye-sensitized solar cells
Acetylene-black paste without a light scattering layer was applied to meso-porous TiO2 photo-electrode films with a crystalline framework, a low residual carbon, and a tunable morphological pore size. The thermal-treated TiO2 photo-electrode films had an increased acetylene-black concentration with an increase in artificial pores and a decrease in residual carbon. The performance of dye-sensitized solar cells (DSSCs) was enhanced by the use of the TiO2 photo-anode pastes at various acetylene-black concentrations. The photo-conversion efficiency of the DSSCs using TiO2 photo-electrode films with 1.5 wt% acetylene-black was enhanced from 7.98 (no acetylene-black) to 9.75% without the integration of a light-scattering layer.open5
Recommended from our members
Impact of monovalent cation halide additives on the structural and optoelectronic properties of CH<inf>3</inf>NH<inf>3</inf>PbI<inf>3</inf> perovskite
The influence of monovalent cation halide additives on the optical, excitonic, and electrical properties of CHNHPbI perovskite is reported. Monovalent cation halide with similar ionic radii to Pb, including Cu, Na, and Ag, have been added to explore the possibility of doping. Significant reduction of sub-bandgap optical absorption and lower energetic disorder along with a shift in the Fermi level of the perovskite in the presence of these cations has been observed. The bulk hole mobility of the additive-based perovskites as estimated using the space charge limited current method exhibits an increase of up to an order of magnitude compared to the pristine perovskites with a significant decrease in the activation energy. Consequentially, enhancement in the photovoltaic parameters of additive-based solar cells is achieved. An increase in open circuit voltage for AgI (≈1.02 vs 0.95 V for the pristine) and photocurrent density for NaI- and CuBr-based solar cells (≈23 vs 21 mA cm for the pristine) has been observed. This enhanced photovoltaic performance can be attributed to the formation of uniform and continuous perovskite film, better conversion, and loading of perovskite, as well as the enhancement in the bulk charge transport along with a minimization of disorder, pointing towards possible surface passivation.M.A.J. thanks Nyak Technology Limited for a PhD scholarship. M.I.D., S.M.Z., and M.G. thank the King Abdulaziz City for Science and Technology (KACST) and Swiss National Science Foundation (SNSF) for financial support. N.A. gratefully acknowledges financial support from the Swiss confederation under Swiss Government Scholarship program. The authors would like to thank Dr. Pierre Mettraux in Molecular and Hybrid Materials Characterization Center, EPFL for carrying out XPS measurements. A.S. gratefully acknowledges financial support from the Indo-UK APEX project. S.P.S. acknowledges Royal Scociety London for the Newton Fellowship. R.H.F, M.A.J., and A.S. would like to acknowledge the support from EPSRC.This is the author accepted manuscript. The final version is available from Wiley via http://dx.doi.org/10.1002/aenm.20150247
An overview of the recent progress in polymeric carbon nitride based photocatalysis
This is the author accepted manuscript. The final version is available from Wiley via the DOI in this record Recently, polymeric carbon nitride (g-C3 N4 ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C3 N4 (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H2 production from H2 O, CO2 conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.National Natural Science Foundation of ChinaMinistry of Science and Technology of Chin
A perspective on using experiment and theory to identify design principles in dye-sensitized solar cells
Dye-sensitized solar cells (DSCs) have been the subject of wide-ranging studies for many
years because of their potential for large-scale manufacturing using roll-to-roll processing
allied to their use of earth abundant raw materials. Two main challenges exist for DSC
devices to achieve this goal; uplifting device efficiency from the 12 to 14% currently
achieved for laboratory-scale ‘hero’ cells and replacement of the widely-used liquid
electrolytes which can limit device lifetimes. To increase device efficiency requires optimized
dye injection and regeneration, most likely from multiple dyes while replacement
of liquid electrolytes requires solid charge transporters (most likely hole transport materials
– HTMs). While theoretical and experimental work have both been widely applied to
different aspects of DSC research, these approaches are most effective when working in
tandem. In this context, this perspective paper considers the key parameters which
influence electron transfer processes in DSC devices using one or more dye molecules
and how modelling and experimental approaches can work together to optimize electron
injection and dye regeneration.
This paper provides a perspective that theory and experiment are best used in tandem to study
DSC device
Hydrothermal Growth and Application of ZnO Nanowire Films with ZnO and TiO2Buffer Layers in Dye-Sensitized Solar Cells
This paper reports the effects of the seed layers prepared by spin-coating and dip-coating methods on the morphology and density of ZnO nanowire arrays, thus on the performance of ZnO nanowire-based dye-sensitized solar cells (DSSCs). The nanowire films with the thick ZnO buffer layer (~0.8–1 μm thick) can improve the open circuit voltage of the DSSCs through suppressing carrier recombination, however, and cause the decrease of dye loading absorbed on ZnO nanowires. In order to further investigate the effect of TiO2buffer layer on the performance of ZnO nanowire-based DSSCs, compared with the ZnO nanowire-based DSSCs without a compact TiO2buffer layer, the photovoltaic conversion efficiency and open circuit voltage of the ZnO DSSCs with the compact TiO2layer (~50 nm thick) were improved by 3.9–12.5 and 2.4–41.7%, respectively. This can be attributed to the introduction of the compact TiO2layer prepared by sputtering method, which effectively suppressed carrier recombination occurring across both the film–electrolyte interface and the substrate–electrolyte interface
Carbon Nanotube Solar Cells
We present proof-of-concept all-carbon solar cells. They are made of a photoactive side of predominantly semiconducting nanotubes for photoconversion and a counter electrode made of a natural mixture of carbon nanotubes or graphite, connected by a liquid electrolyte through a redox reaction. The cells do not require rare source materials such as In or Pt, nor high-grade semiconductor processing equipment, do not rely on dye for photoconversion and therefore do not bleach, and are easy to fabricate using a spray-paint technique. We observe that cells with a lower concentration of carbon nanotubes on the active semiconducting electrode perform better than cells with a higher concentration of nanotubes. This effect is contrary to the expectation that a larger number of nanotubes would lead to more photoconversion and therefore more power generation. We attribute this to the presence of metallic nanotubes that provide a short for photo-excited electrons, bypassing the load. We demonstrate optimization strategies that improve cell efficiency by orders of magnitude. Once it is possible to make semiconducting-only carbon nanotube films, that may provide the greatest efficiency improvement
Certified high-efficiency "large-area" perovskite solar cells module for Fresnel lens-based concentrated photovoltaic
This is the author accepted manuscript. The final version is available on open access from Cell Press via the DOI in this recordData availability: All data generated or analysed during this study are included in the Supplementary Information article
and its data source. Source data are provided in this paper. All data reported in this paper will be shared
by the lead contact upon request.The future of energy generation is well in tune with the critical needs of the global economy, leading to more green innovations and emissions-abatement technologies. Introducing concentrated photovoltaic (CPV) is one of the most promising technologies owing to its high photo-conversion efficiency (PCE). While most researchers use silicon and cadmium telluride for CPV, we investigate the potential in nascent technologies, such as perovskite solar cell (PSC). This work constitutes a preliminary investigation into a ‘large-area’ PSC module under a Fresnel lens (FL) with a ‘refractive optical concentrator-silicon-on-glass’ base to minimise the PV performance and scalability trade-off concerning the PSCs. The FL-PSC system measured the solar current-voltage characteristics in variable lens-to-cell distances and illuminations. A systematic study of the PSC module temperature was monitored using the COMSOL transient heat transfer mechanism. The FL-based technique for ‘large-area’ PSC architecture is an unfolded technology that further facilitates the potential for commercialisation.Engineering and Physical Sciences Research Council (EPSRC)Valais Energy Demonstrators FundEuropean Union Horizon 2020Deputyship for Research & Innovation, Ministry of Education, Saudi Arabi
Rose Bengal sensitized bilayered photoanode of nano-crystalline TiO–CeO for dye-sensitized solar cell application
There are two traditional ways to read Kant’s claim that every event necessarily has a cause: the weaker every-event some-cause (WCP) and the stronger same-cause same-effect (SCP) causal principles. The debate on whether and where he subscribes to the SCP has focused on the Analogies in the Critique of Pure Reason (Guyer, Allison, and Watkins) and on the Metaphysical Foundations of Natural Science (Friedman). By analysing the arguments and conclusions of both the Analogies and the Postulates, as well as the two Latin principles non datur casus and non datur fatum that summarise their results, I will argue that the SCP is actually demonstrated in the Postulates section of the First Critique
- …