11 research outputs found
Mode II fracture energy in the adhesive bonding of dissimilar substrates: carbon fibre composite to aluminium joints
The end-notched flexure (ENF) test calculates the value of mode II fracture energy in adhesive
bonding between the substrates of same nature. Traditional methods of calculating
fracture energy in the ENF test are not suitable in cases where the thickness of the adhesive
is non-negligible compared with adherent thicknesses. To address this issue, a specific
methodology for calculating mode II fracture energy has been proposed in this paper. To
illustrate the applicability of the proposed method, the fracture energy was calculated by
the ENF test for adhesive bonds between aluminium and a composite material, which considered
two different types of adhesive (epoxy and polyurethane) and various surface treatments.
The proposed calculation model provides higher values of fracture energy than
those obtained from the simplified models that consider the adhesive thickness to be zero,
supporting the conclusion that the calculation of mode II fracture energy for adhesives with
non-negligible thickness relative to their adherents should be based on mathematical models,
such as the method proposed in this paper, that incorporate the influence of this thickness
Registered Replication Report: Dijksterhuis and van Knippenberg (1998)
Dijksterhuis and van Knippenberg (1998) reported that participants primed with a category associated with intelligence ("professor") subsequently performed 13% better on a trivia test than participants primed with a category associated with a lack of intelligence ("soccer hooligans"). In two unpublished replications of this study designed to verify the appropriate testing procedures, Dijksterhuis, van Knippenberg, and Holland observed a smaller difference between conditions (2%-3%) as well as a gender difference: Men showed the effect (9.3% and 7.6%), but women did not (0.3% and -0.3%). The procedure used in those replications served as the basis for this multilab Registered Replication Report. A total of 40 laboratories collected data for this project, and 23 of these laboratories met all inclusion criteria. Here we report the meta-analytic results for those 23 direct replications (total N = 4,493), which tested whether performance on a 30-item general-knowledge trivia task differed between these two priming conditions (results of supplementary analyses of the data from all 40 labs, N = 6,454, are also reported). We observed no overall difference in trivia performance between participants primed with the "professor" category and those primed with the "hooligan" category (0.14%) and no moderation by gender
A numerical approach to the disbonding mechanism of adhesive joints
The need for lightweight structures in aeronautics is leading to a strong interest in adhesively bonded joints. Incomplete knowledge of their fatigue behaviour is a major obstacle to their application. At present, the prediction of the disbonding growth is yet an open question. This work aims to develope a numerical model for the computation of the disbonding growth in an adhesive joint. The scope is calculating the energy release under quasi-static conditions in order to relate it to the fatigue disbond growth through the existing analytical models. A finite element model for the prediction of disbond growth under quasi-static loading has been implemented in Abaqus, by introducing a cohesive zone model which is able to capture the process zone around the crack tip and to enforce an energy-based failure criterion. The model, which had originally been developed for double cantilever beam specimens under mode I, was extended to mode II loading. Numerical simulations are validated by comparison with experimental results on double cantilever beam coupons in mode I and with literature results on end notched flexure coupons in mode II conditions. The results from tests and simulations are in accordance with each other. The presented model is a suitable option for the estimation of fracture mechanics parameters in cases in which complex geometry and loads prevent the application of analytical theories
The pilin protein FimP from Actinomyces oris : crystal structure and sequence analyses
The Actinomyces oris type-1 pili are important for the initial formation of dental plaque by binding to salivary proteins that adhere to the tooth surface. Here we present the X-ray structure of FimP, the protein that is polymerized into the type-1 pilus stalk, assisted by a pili-specific sortase. FimP consists of three tandem IgG-like domains. The middle and C-terminal domains contain one autocatalyzed intramolecular isopeptide bond each, a feature used by Gram-positive bacteria for stabilization of surface proteins. While the N-terminal domain harbours all the residues necessary for forming an isopeptide bond, no such bond is observed in the crystal structure of this unpolymerized form of FimP. The monomer is further stabilized by one disulfide bond each in the N- and C-terminal domains as well as by a metal-coordinated loop protruding from the C-terminal domain. A lysine, predicted to be crucial for FimP polymerization by covalent attachment to a threonine from another subunit, is located at the rim of a groove lined with conserved residues. The groove may function as a docking site for the sortase-FimP complex. We also present sequence analyses performed on the genes encoding FimP as well as the related FimA, obtained from clinical isolates