5,922 research outputs found
The imaging of dynamic multiphase fluid flow using synchrotron-based x-ray microtomography at reservoir conditions
The Effects of Integrated Science Inquiry and Literacy Instruction
The effects of integrated literacy and science inquiry instruction were investigated and researched through a case study with students ranging from grades 3-6. In all, five students took part in the case study over the course of four weeks and 16, 55-minute sessions. Previous research indicated positive results in using inquiry based science instruction, literacy practices such as self-questioning and reciprocal teaching, and integrating literacy and science. Positive impacts were noted in comprehension, science content understanding, and ability to create a structured paragraph. The investigation made connections to the outcomes, limitations, previous research, and the need for further research
Water resources data for Alachua, Bradford, Clay, and Union Counties, Florida
A study of the water resources of Alachua, Bradford, Clay, and
Union counties, Florida (fig. 1), was made by the Water Resources
Division of the U. S. Geological Survey in cooperation with the
Florida Geological Survey during the period 1957-61. The results
of this study will be published by the Florida Geological Survey
in the following reports by William E. Clark, Rufus H. Musgrove,
Clarence G. Menke, and Joseph W. Cagle, Jr.: "Interim Report
on the Water Resources of Alachua, Bradford, Clay, and Union
Counties, Florida," "Water Resources of Alachua, Bradford,
Clay, and Union Counties, Florida," and "Hydrology of Brooklyn
Lake, near Keystone Heights, Florida." (Document has 161 pages.
A Corrosion Control Manual for Rail Rapid Transit
This manual addresses corrosion problems in the design, contruction, and maintenance of rapid transit systems. Design and maintenance solutions are provided for each problem covered. The scope encompasses all facilities of urban rapid transit systems: structures and tracks, platforms and stations, power and signals, and cars. The types of corrosion and their causes as well as rapid transit properties are described. Corrosion control committees, and NASA, DOD, and ASTM specifications and design criteria to which reference is made in the manual are listed. A bibliography of papers and excerpts of reports is provided and a glossary of frequently used terms is included
Constraints upon water advection in sediments of the Mariana Trough
Thermal gradient measurements, consolidation tests, and pore water compositions from the Mariana Trough imply that water is moving through the sediments in areas with less than about 100 m of sediment cover. The maximum advection rates implied by the thermal measurements and consolidation tests may be as high as 10−5 cm s−1 but are most commonly in the range of 1 to 5×10−6 cm s−1. Theoretical calculations of the effect of the highest advection rates upon carbonate dissolution indicate that dissolution may be impeded or enhanced (depending upon the direction of flow) by a factor of 2 to 5 times the rate for diffusion alone. The average percentage of carbonate is consistently higher in two cores from the area with no advection or upward advection than the average percentage of carbonate in three cores from the area with downward advection. This increase in average amount of carbonate in cores with upward moving water or no movement cannot be attributed solely to differences in water depth or in amount of terrigenous dilution. If the sediment column acts as a passive boundary layer, then the water velocities necessary to affect chemical gradients of silica are in the range 10−9 to 10−10 cm s−l. However, if dissolution of silica occurs within the sediment column, then the advection velocities needed to affect chemical gradients are at least 3×10−8 cm s−l and may be as high as 3×10−6 cm s−l. This order of magnitude increase in advection velocities when chemical reactions occur within the sediments is probably applicable to other cations in addition to silica. If so, then the advection velocities needed to affect heat flow ( >10−8 cm s−1) and pore water chemical gradients are much nearer in magnitude than previously assumed
Recommended from our members
Determining the orientations of ocean bottom seismometers using ambient noise correlation
The cross-correlation of multicomponent ambient seismic noise can reveal both the velocity and polarization of surface waves propagating between pairs of stations. We explore this property to develop a novel method for determining the horizontal orientation of ocean bottom seismometers (OBS) by analyzing the polarization of Rayleigh waves retrieved from ambient noise cross-correlation. We demonstrate that the sensor orientations can be estimated through maximizing the correlation between the radial-vertical component and the phase-shifted vertical-vertical component of the empirical Green's tensor. We apply this new method to the ELSC (Eastern Lau Spreading Center) OBS experiment data set and illustrate its robustness by comparing the obtained orientations with results from a conventional method utilizing teleseismic P and Rayleigh wave polarizations. When applied to a large OBS array, the ambient noise method provides a larger number of orientation estimates and better azimuthal coverage than typically is possible with traditional methods
Recommended from our members
Evidence for excess pore pressures in southwest Indian Ocean sediments
Brown clay cores from the Madagascar and Crozet basins show the following evidence of excess pore pressures: large amounts of flow-in, increasing average sedimentation rate with age, and nonlinear temperature gradients. Additionally, many hilltops in these basins have no visible sediment cover. The bare hilltops may result from periodic slumping caused by excess pore pressures. Calculated excess pore pressures which equal or exceed the overburden pressure were inferred from water fluxes predicted by nonlinear temperature gradients and laboratory permeability measurements by using Darcy's law. Since pore pressures which exceed the overburden pressure are unreasonable, we attribute this discrepancy to laboratory measurements which underestimate the in situ permeability. The widespread presence of overpressured sediments in areas of irregular topography provides a process for resuspension of clay-sized particles. This mechanism does not require high current velocities for the erosion of clay and therefore can be applied to many areas where no strong currents are evident. Carbonate-rich sediments from the Madagascar Ridge, the Mozambique Ridge, and the Agulhas Plateau had almost no flow-in and occurred in areas where all topography was thickly draped with sediment. Since the age and tectonic location of the ridges and plateaus preclude water circulation in the basement, we attribute these differences between the brown clay and the carbonate-rich material to an absence of significant excess pore pressures in the plateau and ridge sediments
Benign persistent papular acantholytic and dyskeratotic eruption: A case report and review of the literature
- …