33,354 research outputs found
The determination of equivalent bearing loading for the BSMT that simulate SSME high pressure oxidizer turbopump conditions using the SHABERTH/SINDA computer programs
The MSFC bearing seal material tester (BSMT) can be used to evaluate the SSME high pressure oxygen turbopump (HPOTP) bearing performance. The four HPOTP bearings have both an imposed radial and axial load. These radial and axial loads are caused by the HPOTP's shaft, main impeller, preburner impeller, turbine and by the LOX coolant flow through the bearings, respectively. These loads coupled with bearing geometry and operating speed can define bearing contact angle, contact Hertz stress, and heat generation rates. The BSMT has the capability of operating at HPOTP shaft speeds, provide proper coolant flowrates but can only apply an axial load. Due to the inability to operate the bearings in the BSMT with an applied radial load, it is important to develop an equivalency between the applied axial loads and the actual HPOTP loadings. A shaft-bearing-thermal computer code (SHABERTH/SINDA) is used to simulate the BSMT bearing-shaft geometry and thermal-fluid operating conditions
Transverse effects in multifrequency Raman generation
The theory of ultrabroadband multifrequency Raman generation is extended, for the first time, to allow for beam-propagation effects in one and two transverse dimensions. We show that a complex transverse structure develops even when diffraction is neglected. In the general case, we examine how the ultrabroadband multifrequency Raman generation process is affected by the intensity, phase quality, and width of the input beams, and by the length of the Raman medium. The evolution of power spectra, intensity profiles, and global characteristics of the multifrequency beams are investigated and explained. In the two-dimensional transverse case, bandwidths comparable to the optical carrier frequency, spanning the whole visible spectrum and beyond, are still achievable
Restoring Trust Relationships within Collaborative Digital Preservation Federations
4th International Conference on Open RepositoriesThis presentation was part of the session : Conference PresentationsDate: 2009-05-19 01:00 PM β 02:30 PMThe authors extend their process for creating and establishing trust relationships to include steps for restoring trust relationships after catastrophic events. Part of this model will include best practices for business continuity relationships and will integrate trust models from Holland and Lockett (1998) and Ring and Van de Ven (1994) and how they can be applied to a process for trust restoration after periods of disaster or critical data loss. These models provide key frameworks for understanding how trust can be utilized for collaborative start points as well as for collaborative recovery points from physical natural disaster or critical data loss
High prices for rare species can drive large populations extinct: the anthropogenic Allee effect revisited
Consumer demand for plant and animal products threatens many populations with
extinction. The anthropogenic Allee effect (AAE) proposes that such extinctions
can be caused by prices for wildlife products increasing with species rarity.
This price-rarity relationship creates financial incentives to extract the last
remaining individuals of a population, despite higher search and harvest costs.
The AAE has become a standard approach for conceptualizing the threat of
economic markets on endangered species. Despite its potential importance for
conservation, AAE theory is based on a simple graphical model with limited
analysis of possible population trajectories. By specifying a general class of
functions for price-rarity relationships, we show that the classic theory can
understate the risk of species extinction. AAE theory proposes that only
populations below a critical Allee threshold will go extinct due to increasing
price-rarity relationships. Our analysis shows that this threshold can be much
higher than the original theory suggests, depending on initial harvest effort.
More alarmingly, even species with population sizes above this Allee threshold,
for which AAE predicts persistence, can be destined to extinction. Introducing
even a minimum price for harvested individuals, close to zero, can cause large
populations to cross the classic anthropogenic Allee threshold on a trajectory
towards extinction. These results suggest that traditional AAE theory may give
a false sense of security when managing large harvested populations
Phylogenetic analysis of microbial communities in different regions of the gastrointestinal tract in Panaque nigrolineatus, a wood-eating fish
The Neotropical detritivorous catfish Panaque nigrolineatus imbibes large quantities of wood as part of its diet. Due to the interest in cellulose, hemi-cellulose and lignin degradation pathways, this organism provides an interesting model system for the detection of novel microbial catabolism. In this study, we characterize the microbial community present in different regions of the alimentary tract of P. nigrolineatus fed a mixed diet of date palm and palm wood in laboratory aquaria. Analysis was performed on 16S rRNA gene clone libraries derived from anterior and posterior regions of the alimentary tract and the auxiliary lobe (AL), an uncharacterized organ that is vascularly attached to the midgut. Sequence analysis and phylogenetic reconstruction revealed distinct microbial communities in each tissue region. The foregut community shared many phylotypes in common with aquarium tank water and included Legionella and Hyphomicrobium spp. As the analysis moved further into the gastrointestinal tract, phylotypes with high levels of 16S rRNA sequence similarity to nitrogen-fixing Rhizobium and Agrobacterium spp. and Clostridium xylanovorans and Clostridium saccharolyticum, dominated midgut and AL communities. However, the hindgut was dominated almost exclusively by phylotypes with the highest 16S rRNA sequence similarity to the Cytophaga-Flavobacterium-Bacteroides phylum. Species richness was highest in the foregut (Chao(1) = 26.72), decreased distally through the midgut (Chao(1) = 25.38) and hindgut (Chao(1) = 20.60), with the lowest diversity detected in the AL (Chao(1) = 18.04), indicating the presence of a specialized microbial community. Using 16S rRNA gene phylogeny, we report that the P. nigrolineatus gastrointestinal tract possesses a microbial community closely related to microorganisms capable of cellulose degradation and nitrogen fixation. Further studies are underway to determine the role of this resident microbial community in Panaque nigrolineatus
Solution of 3-dimensional time-dependent viscous flows. Part 2: Development of the computer code
There is considerable interest in developing a numerical scheme for solving the time dependent viscous compressible three dimensional flow equations to aid in the design of helicopter rotors. The development of a computer code to solve a three dimensional unsteady approximate form of the Navier-Stokes equations employing a linearized block emplicit technique in conjunction with a QR operator scheme is described. Results of calculations of several Cartesian test cases are presented. The computer code can be applied to more complex flow fields such as these encountered on rotating airfoils
Solution of 3-dimensional time-dependent viscous flows. Part 3: Application to turbulent and unsteady flows
A numerical scheme is developed for solving the time dependent, three dimensional compressible viscous flow equations to be used as an aid in the design of helicopter rotors. In order to further investigate the numerical procedure, the computer code developed to solve an approximate form of the three dimensional unsteady Navier-Stokes equations employing a linearized block implicit technique in conjunction with a QR operator scheme is tested. Results of calculations are presented for several two dimensional boundary layer flows including steady turbulent and unsteady laminar cases. A comparison of fourth order and second order solutions indicate that increased accuracy can be obtained without any significant increases in cost (run time). The results of the computations also indicate that the computer code can be applied to more complex flows such as those encountered on rotating airfoils. The geometry of a symmetric NACA four digit airfoil is considered and the appropriate geometrical properties are computed
- β¦