Two-dimensional TiOx nanostructures on Au(111): a Scanning Tunneling Microscopy and Spectroscopy investigation

We investigated the growth of titanium oxide two-dimensional (2D) nanostructures on Au(111), produced by Ti evaporation and post-deposition oxidation. Scanning tunneling microscopy and spectroscopy (STM and STS) and low-energy electron diffraction (LEED) measurements characterized the morphological, structural and electronic properties of the observed structures. Five distinct TiOx phases were identified: the honeycomb and pinwheel phases appear as monolayer films wetting the gold surface, while nanocrystallites of the triangular, row and needle phases grow mainly over the honeycomb or pinwheel layers. Density Functional Theory (DFT) investigation of the honeycomb structure supports a (2 x 2) structural model based on a Ti-O bilayer having Ti2O3 stoichiometry. The pinwheel phase was observed to evolve, for increasing coverage, from single triangular crystallites to a well-ordered film forming a (4*sqrt(7) x 4*sqrt(7))R19.1° superstructure, which can be interpreted within a moire-like model. Structural characteristics of the other three phases were disclosed from the analysis of high-resolution STM measurements. STS measurements revealed a partial metallization of honeycomb and pinwheel and a semiconducting character of row and triangular phases

Excitation Wavelength- and Medium-Dependent Photoluminescence of Reduced Nanostructured TiO2 Films

The performance of TiO2 nanomaterials in solar energy conversion applications can be tuned by means of thermal treatments in reducing atmospheres, which introduce defects (such as oxygen vacancies), allowing, for instance, a better charge transport or a higher photocatalytic activity. The characterization of these defects and the understanding of their role are pivotal to carefully engineer the properties of TiO2, and, among various methods, they have been addressed by photoluminescence (PL) spectroscopy. A definitive framework to describe the PL properties of TiO2, however, is still lacking. In this work, we report on the PL of nanostructured anatase TiO2 thin films, annealed in different atmospheres (oxidizing and reducing), and consider the effects of different excitation energies and different surrounding media on their PL spectra. A broad PL signal centered around 1.8–2.0 eV is found for all the films with UV excitation in air as well as in vacuum, while the same measurements in ethanol lead to a blueshift and to intensity changes in the spectra. On the other hand, measurements with different sub-bandgap excitations show PL peaking at 1.8 eV, with an intensity trend only dependent on the thermal treatment and not on the surrounding medium. The results of PL spectroscopy, together with electron paramagnetic resonance spectroscopy, suggest the critical role of oxygen vacancies and Ti3+ ions as radiative recombination centers. The complex relationship between thermal treatments and PL data in the explored conditions is discussed, suggesting the importance of such investigations for a deeper understanding on the relationship between defects in TiO2 and photoactivity

Utilization of the Lower Inflection Point of the Pressure-Volume Curve Results In Protective Conventional Ventilation Comparable to High Frequency Oscillatory Ventilation in an Animal Model of Acute Respiratory Distress Syndrome

INTRODUCTION: Studies comparing high frequency oscillatory and conventional ventilation in acute respiratory distress syndrome have used low values of positive end-expiratory pressure and identified a need for better recruitment and pulmonary stability with high frequency. OBJECTIVE: To compare conventional and high frequency ventilation using the lower inflection point of the pressure-volume curve as the determinant of positive end-expiratory pressure to obtain similar levels of recruitment and alveolar stability. METHODS: After lung lavage of adult rabbits and lower inflection point determination, two groups were randomized: conventional (positive end-expiratory pressure = lower inflection point; tidal volume=6 ml/kg) and high frequency ventilation (mean airway pressures= lower inflection point +4 cmH2O). Blood gas and hemodynamic data were recorded over 4 h. After sacrifice, protein analysis from lung lavage and histologic evaluation were performed. RESULTS: The oxygenation parameters, protein and histological data were similar, except for the fact that significantly more normal alveoli were observed upon protective ventilation. High frequency ventilation led to lower PaCO2 levels. DISCUSSION: Determination of the lower inflection point of the pressure-volume curve is important for setting the minimum end expiratory pressure needed to keep the airways opened. This is useful when comparing different strategies to treat severe respiratory insufficiency, optimizing conventional ventilation, improving oxygenation and reducing lung injury. CONCLUSIONS: Utilization of the lower inflection point of the pressure-volume curve in the ventilation strategies considered in this study resulted in comparable efficacy with regards to oxygenation and hemodynamics, a high PaCO2 level and a lower pH. In addition, a greater number of normal alveoli were found after protective conventional ventilation in an animal model of acute respiratory distress syndrome

The key role of interband transitions in hot-electron-modulated TiN films

Titanium nitride (TiN) is an emerging new material in the field of plasmonics, both for its linear and nonlinear optical properties. Similarly to noble metals, like, e.g., gold (Au), the giant third-order optical nonlinearity of TiN following excitation with fs-laser pulses has been attributed to the generation of hot electrons. Here we provide a numerical study of the Fermi smearing mechanism associated with photogenerated hot carriers and subsequent interband transitions modulation in TiN films. A detailed comparison with Au films is also provided, and saturation effects of the permittivity modulation for increasing pump fluence are discussed

Nanoporous Titanium Oxynitride Nanotube Metamaterials with Deep Subwavelength Heat Dissipation for Perfect Solar Absorption

We report a quasi-unitary broadband absorption over the ultraviolet-visible-near-infrared range in spaced high aspect ratio, nanoporous titanium oxynitride nanotubes, an ideal platform for several photothermal applications. We explain such an efficient light-heat conversion in terms of localized field distribution and heat dissipation within the nanopores, whose sparsity can be controlled during fabrication. The extremely large heat dissipation could not be explained in terms of effective medium theories, which are typically used to describe small geometrical features associated with relatively large optical structures. A fabrication-process-inspired numerical model was developed to describe a realistic space-dependent electric permittivity distribution within the nanotubes. The resulting abrupt optical discontinuities favor electromagnetic dissipation in the deep sub-wavelength domains generated and can explain the large broadband absorption measured in samples with different porosities. The potential application of porous titanium oxynitride nanotubes as solar absorbers was explored by photothermal experiments under moderately concentrated white light (1-12 Suns). These findings suggest potential interest in realizing solar-thermal devices based on such simple and scalable metamaterials

Análise da imunogenicidade e da estabilidade do surfactante pulmonar de origem porcina administrado em coelhos

PURPOSE: To study the immunogenicity and the stability of the porcine pulmonary surfactant preparation produced by the Instituto Butantan. METHOD: Immunogenicity assay: Sixteen New-Zealand-White rabbits (1000 g body weight) were divided into 4 study groups. Each group was assigned to receive either a) Butantan surfactant, b) Survanta® (Abbott Laboratories), c) Curosurf® (Farmalab Chiesi), or d) no surfactant. The surfactants were administered intratracheally, and the animals were collected immediately before and 60 and 180 days after surfactant administration. Sera were assayed for the presence of antisurfactant antibodies by enzyme-linked immunosorbent assay (ELISA). Stability assay: The Butantan surfactant used in this assay had been stored for one year in the refrigerator (4 to 8ºC) and its stability was evaluated in distinct assay conditions using a premature rabbit model. RESULTS: Immunogenicity assay: None of the surfactants analyzed triggered antibody immune responses against their components in any of the animals. Stability assay: The results of this study demonstrate that Butantan surfactant was as effective as Curosurf when both were submitted to the adverse circumstance of short- and long-term storage at room temperature. A similar level of efficacy for the Butantan surfactant, as compared to Curosurf was demonstrated by the pulmonary dynamic compliance, ventilatory pressure, and pressure-volume curve results. CONCLUSION: The results of our study demonstrate that Butantan surfactant may be a suitable alternative for surfactant replacement therapy.OBJETIVO: Estudar a imunogenicidade e a estabilidade do surfactante de origem porcina produzido pelo Instituto Butantan. MÉTODO: Experimento imunogenicidade: 16 coelhos da raça New-Zealand-White (Peso de 1000g) foram divididos em grupos de 4 animais. Cada grupo foi designado para receber: a) Surfactante do Butantan, b) Survanta® (Abbott Laboratories), c) Curosurf (Farmalab Chiesi) e d) nenhum tratamento com surfactante. Os surfactantes foram administrados via intratraqueal e o sangue dos animais foi coletado antes, 60 e 180 dias após a administração do surfactante. O soro obtido foi analisado quanto a presença de anticorpos anti-surfactante pelo método ELISA (enzyme-linked immunosorbent assay). Experimento estabilidade: O surfactante do Butantan usado neste experimento tinha sido armazenado por um ano em refrigerador (4 a 8°C) e sua estabilidade foi analisada em condições distintas de experimentação, usando o modelo de coelho prematuro. RESULTADOS: Experimento imunogenicidade: Nenhum dos surfactantes analisados determinou a produção de anticorpos contra seus constituintes. Experimento estabilidade: Os resultados deste estudo demonstraram que o surfactante do Instituto Butantan mostrou eficácia semelhante a do Curosurf após ter sido submetido à condições adversas ao longo do tempo. A eficácia foi demonstrada através da complacência pulmonar dinâmica, pressão ventilatória e da curva pressão-volume. CONCLUSÃO: Os resultados deste estudo demonstraram que o surfactante do Instituto Butantan pode representar um tratamento alternativo de reposição de surfactante

Estudo dos efeitos de diferentes doses de surfactante exógeno para o tratamento da síndrome de aspiração de mecônio em coelhos recém-nascidos

OBJECTIVE: To evaluate the effects of 2 different doses of exogenous surfactant on pulmonary mechanics and on the regularity of pulmonary parenchyma inflation in newborn rabbits. METHOD: Newborn rabbits were submitted to tracheostomy and randomized into 4 study groups: the Control group did not receive any material inside the trachea; the MEC group was instilled with meconium, without surfactant treatment; the S100 and S200 groups were instilled with meconium and were treated with 100 and 200 mg/kg of exogenous surfactant (produced by Instituto Butantan) respectively. Animals from the 4 groups were mechanically ventilated during a 25-minute period. Dynamic compliance, ventilatory pressure, tidal volume, and maximum lung volume (P-V curve) were evaluated. Histological analysis was conducted using the mean linear intercept (Lm), and the lung tissue distortion index (SDI) was derived from the standard deviation of the means of the Lm. One-way analysis of variance was used with a = 0.05. RESULTS: After 25 minutes of ventilation, dynamic compliance (mL/cm H2O · kg) was 0.87 ± 0.07 (Control); 0.49 ± 0.04 (MEC*); 0.67 ± 0.06 (S100); and 0.67 ± 0.08 (S200), and ventilatory pressure (cm H2O) was 9.0 ± 0.9 (Control); 16.5 ± 1.7 (MEC*); 12.4 ± 1.1 (S100); and 12.1 ± 1.5 (S200). Both treated groups had lower Lm values and more homogeneity in the lung parenchyma compared to the MEC group: SDI = 7.5 ± 1.9 (Control); 11.3 ± 2.5 (MEC*), 5.8 ± 1.9 (S100); and 6.7 ± 1.7 (S200) (*P < 0.05 versus all the other groups). CONCLUSIONS: Animals treated with surfactant showed significant improvement in pulmonary mechanics and more regularity of the lung parenchyma in comparison to untreated animals. There was no difference in results after treatment with either of the doses used.OBJETIVO: Avaliar os efeitos de duas diferentes doses de surfactante exógeno sobre a mecânica pulmonar e sobre a regularidade da expansão do parênquima pulmonar em coelhos recém-nascidos. MÉTODO: Coelhos recém-nascidos foram traqueostomizados e randomizados em quatro grupos de estudo: grupo-Controle, sem aspiração de mecônio; grupo MEC, com aspiração de mecônio e sem tratamento com surfactante exógeno; grupos S100 e S200, ambos com aspiração de mecônio e tratados respectivamente com 100 e 200 mg/kg de surfactante exógeno (produzido e fornecido pelo Instituto Butantan). Os animais dos 4 grupos foram ventilados por 25 minutos. A mecânica pulmonar foi avaliada a partir dos valores de complacência dinâmica, pressão ventilatória, volume-corrente e volume pulmonar máximo (curva P-V). A análise histológica foi feita calculando-se o diâmetro alveolar médio (Lm) e o índice de distorção através do desvio padrão do Lm. Utilizou-se ANOVA One Way com a = 0,05. RESULTADOS: Após 25 minutos de ventilação, os valores de complacência dinâmica (ml/cm H2O.kg) foram: 0,87± 0,07 (Controle); 0,49±0,04 (MEC*); 0,67±0,06 (S100) e 0,67±0,08 (S200) e de pressão ventilatória (cm H2O): 9,0± 0,9 (Controle); 16,5±1,7 (MEC*); 12,4±1,1 (S100) e 12,1±1,5 (S200). Ambos os grupos tratados tiveram padrão de expansão do parênquima mais homogêneo em relação aos animais não tratados: índice de distorção de 7,5± 1,9 (Controle); 11,3±2,5 (MEC*); 5,8±1,9 (S100) e 6,7±1,7 (S200) (*p < 0,05 vs outros grupos). CONCLUSÕES: Animais tratados com surfactante mostraram melhora significativa da mecânica pulmonar e maior homogeneidade do padrão de expansão pulmonar comparados ao grupo não tratado. Não houve influência das doses de surfactante utilizadas

Distribution of killer cell immunoglobulin-like receptors genes in the Italian Caucasian population

BACKGROUND: Killer cell immunoglobulin-like receptors (KIRs) are a family of inhibitory and activatory receptors that are expressed by most natural killer (NK) cells. The KIR gene family is polymorphic: genomic diversity is achieved through differences in gene content and allelic polymorphism. The number of KIR loci has been reported to vary among individuals, resulting in different KIR haplotypes. In this study we report the genotypic structure of KIRs in 217 unrelated healthy Italian individuals from 22 immunogenetics laboratories, located in the northern, central and southern regions of Italy. METHODS: Two hundred and seventeen DNA samples were studied by a low resolution PCR-SSP kit designed to identify all KIR genes. RESULTS: All 17 KIR genes were observed in the population with different frequencies than other Caucasian and non-Caucasian populations; framework genes KIR3DL3, KIR3DP1, KIR2DL4 and KIR3DL2 were present in all individuals. Sixty-five different profiles were found in this Italian population study. Haplotype A remains the most prevalent and genotype 1, with a frequency of 28.5%, is the most commonly observed in the Italian population. CONCLUSION: The Italian Caucasian population shows polymorphism of the KIR gene family like other Caucasian and non-Caucasian populations. Although 64 genotypes have been observed, genotype 1 remains the most frequent as already observed in other populations. Such knowledge of the KIR gene distribution in populations is very useful in the study of associations with diseases and in selection of donors for haploidentical bone marrow transplantation