Sustainable Luxury Marketing : A synthesis and research agenda

Sustainability has become a pervasive issue for the luxury sector, gaining traction with brand managers, scholars, policy-makers, the media, and academia. The purpose of this paper is to examine the state of sustainable luxury research in marketing and consumer behaviour by critically reviewing and synthesizing the growing but fragmented body of scholarly work on sustainable-luxury marketing. The paper critically assesses where, how and by whom research on sustainable luxury is being conducted, and it identifies gaps for future investigation. The paper reviews research published between 2007 and 2018 within major peer-reviewed English-language scholarly publications in business, marketing, ethics, fashion, food and tourism journals. The research is identified using the keywords sustainable luxury, green luxury, eco-luxury and organic luxury. Three core themes emerge from this review: (1) consumer concerns and practices; (2) organizational concerns and practices; and (3) international and cross-cultural issues. The review confirms that research on sustainable luxury is significantly underdeveloped. This paper provides the first critical and comprehensive assessment and categorization of the emergent literature streams on sustainable luxury. The authors argue for a broader, deeper and more critical research agenda on the relationship between sustainability and luxury. Potential avenues for future research on sustainable luxury are proposed, with calls for theoretical and cross-cultural reflections that tackle broader systemic and institutional issues within the field

Minimizing errors in RT-PCR detection and quantification of SARS-CoV-2 RNA for wastewater surveillance

Wastewater surveillance for pathogens using reverse transcription-polymerase chain reaction (RT-PCR) is an effective and resource-efficient tool for gathering community-level public health information, including the incidence of coronavirus disease-19 (COVID-19). Surveillance of Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) in wastewater can potentially provide an early warning signal of COVID-19 infections in a community. The capacity of the world's environmental microbiology and virology laboratories for SARS-CoV-2 RNA characterization in wastewater is increasing rapidly. However, there are no standardized protocols or harmonized quality assurance and quality control (QA/QC) procedures for SARS-CoV-2 wastewater surveillance. This paper is a technical review of factors that can cause false-positive and false-negative errors in the surveillance of SARS-CoV-2 RNA in wastewater, culminating in recommended strategies that can be implemented to identify and mitigate some of these errors. Recommendations include stringent QA/QC measures, representative sampling approaches, effective virus concentration and efficient RNA extraction, PCR inhibition assessment, inclusion of sample processing controls, and considerations for RT-PCR assay selection and data interpretation. Clear data interpretation guidelines (e.g., determination of positive and negative samples) are critical, particularly when the incidence of SARS-CoV-2 in wastewater is low. Corrective and confirmatory actions must be in place for inconclusive results or results diverging from current trends (e.g., initial onset or reemergence of COVID-19 in a community). It is also prudent to perform interlaboratory comparisons to ensure results' reliability and interpretability for prospective and retrospective analyses. The strategies that are recommended in this review aim to improve SARS-CoV-2 characterization and detection for wastewater surveillance applications. A silver lining of the COVID-19 pandemic is that the efficacy of wastewater surveillance continues to be demonstrated during this global crisis. In the future, wastewater should also play an important role in the surveillance of a range of other communicable diseases

Factors Associated with Revision Surgery after Internal Fixation of Hip Fractures

Background: Femoral neck fractures are associated with high rates of revision surgery after management with internal fixation. Using data from the Fixation using Alternative Implants for the Treatment of Hip fractures (FAITH) trial evaluating methods of internal fixation in patients with femoral neck fractures, we investigated associations between baseline and surgical factors and the need for revision surgery to promote healing, relieve pain, treat infection or improve function over 24 months postsurgery. Additionally, we investigated factors associated with (1) hardware removal and (2) implant exchange from cancellous screws (CS) or sliding hip screw (SHS) to total hip arthroplasty, hemiarthroplasty, or another internal fixation device. Methods: We identified 15 potential factors a priori that may be associated with revision surgery, 7 with hardware removal, and 14 with implant exchange. We used multivariable Cox proportional hazards analyses in our investigation. Results: Factors associated with increased risk of revision surgery included: female sex, [hazard ratio (HR) 1.79, 95% confidence interval (CI) 1.25-2.50; P = 0.001], higher body mass index (fo

A model of ballistic helium transport during helium-induced fuzz growth in tungsten

Ballistic helium transport in tungsten during fuzz growth was investigated to provide insight into the helium-induced nanostructuring process which adversely affects the near-surface properties of tungsten plasma-facing components. An analytical model of helium ion transport in the vacuum region within the fuzz layer was developed, whereby He ions are assumed to move in straight-line trajectories with mean free paths determined from fuzz/nanotendril dimensions. Reflection of ions from tendril sides was considered, with He ions allowed to implant into the bulk at the base of the fuzz layer if they maintain ≥5eV of energy necessary to overcome the He–W surface barrier potential, resulting in an increase in the effective He mean free path. Using the model results for helium implantation in the bulk, a helium fluence-fuzz thickness relation was achieved, which matches well with experimental data in the literature, and implies that the fuzz growth rate is consistent with ballistic implantation into the bulk through the growing porous fuzz layer

Hyperspectral imaging and TRI3DYN simulation study of physical sputtering from a fuzzy surface

The influence of a fuzzy surface on the physical sputtering of Mo in He plasmas has been studied with hyperspectral imaging (HSI) measurements and simulations that couple the TRI3DYN code with an impurity transport code. The 2D profiles of the Mo I line emission intensity from HSI images reveal that the sputtering yield, Y, is reduced to ∼40 % of the smooth-surface value due to the presence of a fuzz layer, while the angular distribution of the sputtered Mo atoms might not change significantly. The simulations reproduce the Y reduction successfully, but indicate that fuzz causes an increase in the small-angle distribution of sputtered atoms. However, the increase is too small to produce an observable change in the Mo I emission profiles. A simple analytical model that assumes a single collision mean free path for a fuzz layer and considers only the primary sputtering events qualitatively reproduces the Y reduction and the small-angle distribution enhancement, explaining the geometrical effect of fuzz on physical sputtering

Temperature dependent study of helium retention in tungsten fuzz surfaces

A temperature dependent study was performed on the helium retention in tungsten fuzz layers, in an attempt to provide further insight into the fuzz formation process and its relationship to the amount of trapped helium. Fuzz layers with thicknesses of 1.0 or 1.7μm were initially formed with pure 4He plasma at 1100 K, then sequentially exposed to a mixed 3He-4He plasma at a range of sample temperatures (i.e., 316–1053 K). 3He retained in the fuzzy layer and in the bulk substrate after plasma exposure was measured by nuclear reaction analysis, and the total (3He＋4He) retention due to the sequential exposure was inferred from the 3He plasma concentration. Helium retention in the fuzz layer was found to be approximately independent of sample temperature. Below 1053 K, helium retention in the bulk remained at 1–10×1019m−2, similar to saturated values previously measured in smooth tungsten, suggesting sufficient helium reaching the bulk. At 1053 K, a more than an order of magnitude increase in helium retention in the bulk was observed. Its occurrence near the fuzz formation temperature threshold suggests that fuzz growth is correlated with the enhanced helium concentration in the bulk

D retention in e-beam powder-bed fused (3-D printed) tungsten exposed to high-flux deuterium plasma in Pisces-RF

Tungsten targets produced by the additive manufacturing (AM) method of electron-beam powder-bed fusion, or 3-D metal printing, are exposed to high flux D plasma in the Pisces-RF linear plasma device with the plasma-exposed surface normal to the AM build direction. D retention was measured by thermal desorption mass spectrometry following exposure to D plasma with an associated ∼50eV D+ ion flux. D+ fluence, and operational temperature, in the ranges 5×1024–5×1026 m−2 and 400–1000 K, are explored. D retention values for the AM W are compared to identically plasma exposed ’conventional’ sintered W and it is found that total D retention is similar. However, the D thermal release is notably different. Desorption from the AM W shows reduced D retention in traps typical of sintered W, and moderately increased trapping in defect types of higher trap release energy. The dependence of D retention on fluence is also different for the AM W, revealing an uptake slower than expected from Fickian diffusion, while that for sintered W is consistent and in agreement with previous poly-crystalline W results from Pisces-B. Hydrogen transport modeling of the fluence dependence suggests that interconnected pathways for D release back to the surface during plasma-exposure can account for the slower D uptake in the AM W

Changes in the structure and D desorptive release from W-D co-deposit layers caused by thermal annealing

The annealing of ∼1 μm thick tungsten–deuterium co-deposit layers produced at 320 ± 25 K is found to induce changes in the desorptive release behavior and crystal structure. The changes in co-deposits were revealed by annealing in the temperature range 273–1273 K, examining the crystal structure with glancing angle X-ray diffraction, re-populating traps remaining following the anneal, by D plasma exposure at 373 K, then re-examining the co-deposits with glancing angle X-ray diffraction and scanning electron microscopy, before performing thermal desorption mass spectrometry to ascertain the effect of annealing on trap concentrations. The results indicate that low temperature W-D co-deposit layers are prone to the development of a significant fraction of deuterium retention sites, with a predominant thermal release that begins at ∼400 K and ceases approaching ∼1000 K. Increased annealing temperature is found to progressively depopulate and remove low temperature deuterium retention sites, as suggested by an inability to re-populate those sites with the deuterium plasma. Scanning electron micro-graphs show marked differences at the anneal temperature extremes, with surface conversion from a dendritic appearance at 320 K to a nodular appearance at 1273 K. X-ray diffraction reveals two W phases initially present as 320 K, namely the α-W BCC and β-W A15 crystal phases, the latter of which rapidly anneals out above 490 K leaving only increased Bragg reflection from the α-W phase at the higher annealing temperature

Evaluation of Myocardial Perfusion Using Positron Emission Tomography in Infants Following a Neonatal Arterial Switch Operation

This study was performed to examine the use of positron emission tomography (PET) as a method of evaluating myocardial perfusion after the arterial switch operation for correction of transposition of the great arteries. Eleven asymptomatic patients (median age 2.3 years, range 1.3-4.3 years) post successful neonatal arterial switch repair for transposition underwent cardiac PET scanning using N-13 ammonia before and after dipyridamole infusion. Reconstructed data from static scans were analyzed for regional perfusion defects before and after pharmacological stress. Simultaneous assessment of coronary flow before and after stress was performed using a Patlak graphical analysis of data from dynamic scans. Results obtained from PET scanning were correlated with patterns of coronary artery anatomy, electrocardiogram (ECG) recordings, and echocardiographic evaluation. PET scanning demonstrated normal distribution of myocardial perfusion before and after stress in all but one patient, who was found to have a discrete inferior transmural perfusion defect. The defect was well correlated with perioperative ECG changes and a complicated postoperative course. Myocardial blood flow before dipyridamole (0.690 ml/min/g) was similar to reported adult rest values. There was a small but significant (p <0.002) increase in myocardial blood flow after dipyridamole stress with a mean coronary flow reserve of 1.19 (+/-0.103). Echocardiographic evaluation failed to demonstrate significant wall motion abnormalities in any of the patients. Cardiac PET scanning is a reliable noninvasive method for evaluation of myocardial perfusion in small children. In this study, the incidence of myocardial perfusion defects after the arterial switch operation is lower than previously reported. The data obtained concerning coronary flow and coronary flow reserve after the arterial switch need to be interpreted with caution because normal data in children are not available