Accelerated Stress Tests for Solid Oxide Cells via Artificial Aging of the Fuel Electrode

Solid Oxide Cells (SOCs) are under intensive development due to their great potential to meet the 2030 targets for decarbonization. One of their advantages is that they can work in reversible mode. However, in respect to durability, there are still some technical challenges. Although the quick development of experimental and modeling approaches gives insight into degradation mechanisms, an obligatory step that cannot be avoided is the performance of long‐term tests. Taking into account the target for a commercial lifetime is 80,000 h, experiments lasting years are not acceptable for market needs. This work aims to develop accelerated stress tests (ASTs) for SOCs by the artificial aging of the fuel electrode via redox cycling, which follows the degradation processes of calendar aging (Ni coarsening and migration). However, it can cause irreversible damage by the formation of cracks at the interface anode/electrolyte. The advantages of the developed procedure are that it offers a mild level of oxidation, which can be governed and regulated by the direct impedance monitoring of the Ni network resistance changes during oxidation/reduction on a bare anode sample. Once the redox cycling conditions are fixed and the anode/electrolyte sample is checked for cracks, the procedure is introduced for the AST in full‐cell configuration. The developed methodology is evaluated by a comparative analysis of current voltage and impedance measurements of pristine, artificially aged, and calendar‐aged button cells, combined with microstructural characterization of their anodes. It can be applied in both fuel cell and electrolyzer mode. The results obtained in this study from the electrochemical tests show that the artificially aged experimental cell corresponds to at least 3500 h of nominal operation. The number of hours is much bigger in respect to the microstructural aging of the anode. Taking into consideration that the duration of the performed 20 redox cycles is about 50 to 60 working hours, the acceleration factor in respect to experimental timing is estimated to be higher than 60, without any damaging of the sample. This result shows that the selected approach is very promising for a large decrease in testing times for SOCs

Electrochemical testing of an innovative dual membrane fuel cell design in reversible mode

Solid oxide fuel Cells (SOFC) are intrinsically reversible which makes them attractive for the development of reversible devices (rSOC). The main hurdles that have to be overcome are the higher degradation in electrolyzer (EL) mode and the slow and difficult switching form mode to mode. This work aims at the development and experimental validation of a concept for rSOC based on a new dual membrane fuel cell (dmFC) design which can overcome the existing problems of the classical SOFC. The kernel of the system is additional chamber - central membrane (CM) for water formation/evacuation in FC mode and injection in El mode. Its optimization in respect of microstructure and geometry in laboratory conditions is carried out on button cells. The electrochemical performance is evaluated based on volt-ampere characteristics (VACs) combined with impedance measurements in different working points. The influence of a catalyst in the water chamber is also examined. The VACs which give integral picture of the cell performance are in excellent agreement with the impedance studies which ensure deeper and quantitative information about the processes, including information about the rate limiting step. The results from the optimization of the water chamber show that the combination of design and material brings to important principle advantages in respect to the classical rSOC \u2013 better performance in electrolyzer mode combined with instantaneous switching

A Two-Step Approach to Tune the Micro and Nanoscale Morphology of Porous Niobium Oxide to Promote Osteointegration

We present a two-step surface modification process to tailor the micro and nano morphology of niobium oxide layers. Niobium was firstly anodized in spark regime in a Ca-and P-containing solution and subsequently treated by acid etching. The effects of anodizing time and applied potential on the surface morphology is investigated with SEM and AFM, complemented by XPS compositional analysis. Anodizing with a limiting potential of 250 V results in the fast growth of oxide layers with a homogeneous distribution of micro-sized pores. Cracks are, however, observed on 250 V grown layers. Limiting the anodizing potential to 200 V slows down the oxide growth, increasing the anodizing time needed to achieve a uniform pore coverage but produces fracture-free oxide layers. The surface nano morphology is further tuned by a subsequent acid etching process that leads to the formation of nano-sized pits on the anodically grown oxide surface. In vitro tests show that the etching-induced nanostructure effectively promotes cell adhesion and spreading onto the niobium oxide surface

Electrochemical performances and post-operational characterization of a segmented sofc operated under load for 15k hours

In the frame of the ENDURANCE FCH-JU-FP7 project (2014-2017) a segmented cell (20 segments regularly distributed from fuel inlet to fuel outlet) was operated for 15k hours in co-flow at 750\ub0C (average temperature) in hydrogen under load. Each segment was carefully monitored during operation by periodically acquiring the impedance spectra and constantly checking the voltage under current load. After 15k hours of operation the test was stopped and the cell used for further investigations in order to compare the cell evolution with the segment degradation. The overall observation in cross section of the cell has shown a good stability, however some differences were observed in the electrodes that might be related to the local operating conditions: temperature, H2 /H2O ratio in the fuel stream. The gathered results will contribute to increase the understanding the evolution of a SOFC in real operating conditions. Evidences of the effect of temperature, time and fuel pollutants were found

Andean Land Use And Biodiversity: Humanized Landscapes In A Time Of Change

Some landscapes Cannot be understood without reference., to the kinds. degrees, kinds, degrees, and history of human-caused modifications to the Earth's surface. The tropical latitudes of the Andes represent one such place, with agricultural land-use systems appearing in the Early Holocene. Current land use includes both intensive and extensive grazing and crop- or tree-based agricultural systems found across virtually the, entire range of possible elevations and humidity regimes. Biodiversity found in or adjacent to such humanized landscapes will have been altered in abundance. composition, and distribution in relation to the resiliency of the native Species to harvest, hold cover modifications, and other deliberate or inadvertent human land uses. In addition, the geometries of land cover, resulting flout difference among the shapes, sizes, connectivities, and physical structures of the patches, corridors, and matrices that compose landscape mosaics, will constrain biodiversity, often in predictable ways. This article proposes a conceptual model that alter ins that the Continued persistence of native species may depend as much oil the shifting Of Andean landscape mosaics as on species characteristics, themselves. Furthermore, mountains such as the Andes display long gradients of environmental Conditions that after in relation to latitude, soil moisture, aspect, and elevation. Global environmental change will shift these, especially temperature and humidity regimes along elevational gradients, causing Changes outside the historical range of variation for some species. Both land-use systems and Conservation efforts will need to respond spatially to these shifts in the future, at both landscape and regional scales.Geography and the Environmen

Análisis de diversidad genética en poblaciones de Bauhinia forficata subsp. pruinosa (Pezuña de vaca, o buey, Pata de vaca) mediante el uso de marcadores moleculares

Bauhinia. forficata Link. subsp. pruinosa (Vogel) Fortunato & Wunderlin, crece naturalmente desde Paraguay, Sur de Brasil hasta Argentina, y tiene antecedente de uso ornamental y terapéutico (diurético, antidiarreico, hipoglucemiante). Este proyecto tiene como objetivo la caracterización de poblaciones de bauhinia forficata subsp pruinosa utilizando marcadores moleculares. Existen SSRs diseñados en taxones afines: Cercis canadensis L. y C. chinensis, de los que hay antecedentes de transferibilidad entre especies. Por ello se evaluó su transferencia en las poblaciones de Bauhinia. Estos resultados asociados a los que se obtengan de las evaluaciones químicas permitirán conocer su relación con los biotipos que se identifiquen.  Para esto, se extrajo ADN mediante el método de Dellaporta (1983) de 10 individuos del Jardín botánico Arturo E. Ragonese, se cuantificó y se realizó PCR de los SSRs seleccionados. El producto se sembró, junto con un marcador de peso molecular, en geles desnaturalizantes de poliacrilamida en cubas de secuenciación teñidos con nitrato de plata y revelados con hidróxido de sodio. Hasta el momento, se evaluaron 15 SSRs (6 provinieron de C. chinensis   y 9 de C. canandensis). De estos 15 SSRs, 11 mostraron productos de amplificación. De ellos 9 fueron polimórficos indicando diferencias interpoblacionales, que podrían indicar variabilidad química y por lo tanto resta correlacionar la actividad biológica de los distintos biotipos. Además, algunos SSRs mostraron más de un locus, información que respalda lo señalado por Poggio et al. que en la subfamilia Cercidoideae, Bauhinia (2n=28) se generó por hibridación y poliploídia a partir del ancestro Cercis (2n= 14). Además, se realizó el muestreo de 20 puntos de colecta distribuidas en las provincias de Misiones, Córdoba y Buenos Aires de por lo menos tres individuos por punto. Estos individuos serán evaluados mediante técnicas de SSR para determinar mediante distintos parámetros la variabilidad intra e interpoblacional

Plasma neurofilament light protein correlates with diffusion tensor imaging metrics in frontotemporal dementia

Neurofilaments are structural components of neurons and are particularly abundant in highly myelinated axons. The levels of neurofilament light chain (NfL) in both cerebrospinal fluid (CSF) and plasma have been related to degeneration in several neurodegenerative conditions including frontotemporal dementia (FTD) and NfL is currently considered as the most promising diagnostic and prognostic fluid biomarker in FTD. Although the location and function of filaments in the healthy nervous system suggests a link between increased NfL and white matter degeneration, such a claim has not been fully elucidated in vivo, especially in the context of FTD. The present study provides evidence of an association between the plasma levels of NfL and white matter involvement in behavioral variant FTD (bvFTD) by relating plasma concentration of NfL to diffusion tensor imaging (DTI) metrics in a group of 20 bvFTD patients. The results of both voxel-wise and tract specific analysis showed that increased plasma NfL concentration is associated with a reduction in fractional anisotropy (FA) in a widespread set of white matter tracts including the superior longitudinal fasciculus, the fronto-occipital fasciculus the anterior thalamic radiation and the dorsal cingulum bundle. Plasma NfL concentration also correlated with cortical thinning in a portion of the right medial prefrontal cortex and of the right lateral orbitofrontal cortex. These results support the hypothesis that blood NfL levels reflect the global level of neurodegeneration in bvFTD and help to advance our understanding of the association between this blood biomarker for FTD and the disease process

Mitochondrial phylogeography and demographic history of the Vicuña: implications for conservation

The vicuña (Vicugna vicugna; Miller, 1924) is a conservation success story, having recovered from near extinction in the 1960s to current population levels estimated at 275 000. However, lack of information about its demographic history and genetic diversity has limited both our understanding of its recovery and the development of science-based conservation measures. To examine the evolution and recent demographic history of the vicuña across its current range and to assess its genetic variation and population structure, we sequenced mitochondrial DNA from the control region (CR) for 261 individuals from 29 populations across Peru, Chile and Argentina. Our results suggest that populations currently designated as Vicugna vicugna vicugna and Vicugna vicugna mensalis comprise separate mitochondrial lineages. The current population distribution appears to be the result of a recent demographic expansion associated with the last major glacial event of the Pleistocene in the northern (18 to 22°S) dry Andes 14–12 000 years ago and the establishment of an extremely arid belt known as the 'Dry Diagonal' to 29°S. Within the Dry Diagonal, small populations of V. v. vicugna appear to have survived showing the genetic signature of demographic isolation, whereas to the north V. v. mensalis populations underwent a rapid demographic expansion before recent anthropogenic impacts