3,932 research outputs found
A buckling analysis for rectangular orthotropic plates with centrally located cutouts
An analysis to obtain the buckling loads of a rectangular orthotropic plate with a centrally located cutout is described. Cutout shapes can be elliptical, circular, rectangular, or square. The boundary conditions considered in the analysis are simply supported unloaded edges and either clamped or simply supported loaded edges. The plate is loaded in uniaxial compression by either uniform edge displacement or uniform edge stress. A computer program that implements this analysis is described, and the program use is demonstrated by sample problems
An approximate buckling analysis for rectangular orthotropic plates with centrally located cutouts
An approximate analysis for predicting buckling of rectangular orthotropic composite plates with centrally located cutouts is presented. In this analysis, prebuckling and buckling problems are converted from a two-dimensional to a one-dimensional system of linear differential equations with variable coefficients. The conversion is accomplished by expressing the displacements as series with each element containing a trigonometric function of one coordinate and a coefficient that is an arbitrary function of the other coordinate. Ordinary differential equations are then obtained from a variational principle. Analytical results obtained from the approximate analysis are compared with finite element analyses for isotropic plates and for specially orthotropic plates with central circular cutouts of various sizes. Experimental results for the specially orthotropic plates are also presented. In nearly all cases, the approximate analysis predicts the buckling mode shapes correctly and predicts the buckling loads to within a few percent of the finite element and experimental results
Characterisation of the Etching Quality in Micro-Electro-Mechanical Systems by Thermal Transient Methodology
Our paper presents a non-destructive thermal transient measurement method
that is able to reveal differences even in the micron size range of MEMS
structures. Devices of the same design can have differences in their
sacrificial layers as consequence of the differences in their manufacturing
processes e.g. different etching times. We have made simulations examining how
the etching quality reflects in the thermal behaviour of devices. These
simulations predicted change in the thermal behaviour of MEMS structures having
differences in their sacrificial layers. The theory was tested with
measurements of similar MEMS devices prepared with different etching times. In
the measurements we used the T3Ster thermal transient tester equipment. The
results show that deviations in the devices, as consequence of the different
etching times, result in different temperature elevations and manifest also as
shift in time in the relevant temperature transient curves.Comment: Submitted on behalf of TIMA Editions
(http://irevues.inist.fr/tima-editions
Essential Music Therapist Attributes for Relationship-Building with Children: Does our Profession Train Personal Abilities?
The purpose of this sequential mixed method investigation was to discern the personal attributes that a music therapist employs to engender therapeutic relationships with children and to begin ascertaining the music therapy profession’s attempts to foster these qualities in music therapy students. The overarching goals of this dissertation were to identify aspects of relationship-building that go beyond skills, techniques, and theoretic orientation and to open a discussion about how to best address training of the person of the music therapist. The Phase One phenomenological inquiry consisted of thematic cross-comparison of in-depth interviews with five highly experienced children’s music therapists. Results revealed strong participant agreement about essential personal attributes and relationship-building aptitude which centered on personal qualities, relational abilities, cognitive abilities, and the music. These findings then served as the basis for the Phase Two quantitative survey of 119 music therapy educators and clinical trainers which sought to corroborate the Phase One results and investigate whether and how these abilities were currently being addressed within music therapy education and training. Results indicated \u3e90% overall agreement with the delineated attributes and relational abilities among survey participants. Strong consensus was also evidenced in relation to the importance of possessing these abilities and belief that personal attributes and relationship building skills were currently being addressed within student training. Modeling, discussion, and role playing were overwhelmingly cited as the preferred teaching strategies and music therapy methods courses and clinical practica were indicated as predominant instructional milieu for addressing personal attributes. Survey responses also demonstrated near unanimous agreement that, though difficult, these abilities can be trained. However, discrepancy between educator perceptions of efficacy and reported student response, a lack of emphasis on personal qualities within mandated educational competencies, disagreement between educators and clinical trainers about where in the training curriculum these qualities should be addressed, and potentially inadequate teaching strategies make questionable the participant perception that personal attributes are being adequately addressed. Discussion of the overall results, limiting factors, and implications for further research were presented
Ceramics Analysis and Reliability Evaluation of Structures (CARES). Users and programmers manual
This manual describes how to use the Ceramics Analysis and Reliability Evaluation of Structures (CARES) computer program. The primary function of the code is to calculate the fast fracture reliability or failure probability of macroscopically isotropic ceramic components. These components may be subjected to complex thermomechanical loadings, such as those found in heat engine applications. The program uses results from MSC/NASTRAN or ANSYS finite element analysis programs to evaluate component reliability due to inherent surface and/or volume type flaws. CARES utilizes the Batdorf model and the two-parameter Weibull cumulative distribution function to describe the effect of multiaxial stress states on material strength. The principle of independent action (PIA) and the Weibull normal stress averaging models are also included. Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities are estimated from four-point bend bar or unifrom uniaxial tensile specimen fracture strength data. Parameter estimation can be performed for single or multiple failure modes by using the least-square analysis or the maximum likelihood method. Kolmogorov-Smirnov and Anderson-Darling goodness-of-fit tests, ninety percent confidence intervals on the Weibull parameters, and Kanofsky-Srinivasan ninety percent confidence band values are also provided. The probabilistic fast-fracture theories used in CARES, along with the input and output for CARES, are described. Example problems to demonstrate various feature of the program are also included. This manual describes the MSC/NASTRAN version of the CARES program
Design of ceramic components with the NASA/CARES computer program
The ceramics analysis and reliability evaluation of structures (CARES) computer program is described. The primary function of the code is to calculate the fast-fracture reliability or failure probability of macro-scopically isotropic ceramic components. These components may be subjected to complex thermomechanical loadings, such as those found in heat engine applications. CARES uses results from MSC/NASTRAN or ANSYS finite-element analysis programs to evaluate how inherent surface and/or volume type flaws component reliability. CARES utilizes the Batdorf model and the two-parameter Weibull cumulative distribution function to describe the effects of multiaxial stress states on material strength. The principle of independent action (PIA) and the Weibull normal stress averaging models are also included. Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities are estimated from four-point bend bar or uniform uniaxial tensile specimen fracture strength data. Parameter estimation can be performed for a single or multiple failure modes by using a least-squares analysis or a maximum likelihood method. Kolmogorov-Smirnov and Anderson-Darling goodness-to-fit-tests, 90 percent confidence intervals on the Weibull parameters, and Kanofsky-Srinivasan 90 percent confidence band values are also provided. Examples are provided to illustrate the various features of CARES
The orbits of subdwarf-B + main-sequence binaries. II. Three eccentric systems; BD+29 3070, BD +34 1543 and Feige 87
The predicted orbital-period distribution of the subdwarf-B (sdB) population
is bi-modal with a peak at short ( 250 days) periods.
Observationally, many short-period sdB systems are known, but the predicted
long period peak is missing as orbits have only been determined for a few
long-period systems. As these predictions are based on poorly understood
binary-interaction processes, it is of prime importance to confront the
predictions with reliable observational data. We therefore initiated a
monitoring program to find and characterize long-period sdB stars. In this
paper we aim to determine the orbital parameters of the three long-period
sdB+MS binaries BD+29 3070, BD+34 1543 and Feige 87, to constrain their
absolute dimensions and the physical parameters of the components.
High-resolution spectroscopic time series were obtained with HERMES at the
Mercator telescope on La Palma, and analyzed to determine the radial velocities
of both the sdB and MS components. Photometry from the literature was used to
construct the spectral-energy distribution (SED) of the binaries. Atmosphere
models were used to fit these SEDs and to determine the surface gravities and
temperatures of both components of all systems. Spectral analysis was used to
check the results of the SEDs. An orbital period of 1283 +- 63 d, a mass ratio
of q = 0.39 +- 0.04 and a significant non-zero eccentricity of e = 0.15 +- 0.01
were found for BD+29 3070. For BD+34 1543 we determined P = 972 +- 2 d, q =
0.57 +- 0.01 and again a clear non-zero eccentricity of e = 0.16 +- 0.01. Last,
for Feige 87 we found P = 936 +- 2 d, q = 0.55 +- 0.01 and e = 0.11 +- 0.01.
BD+29 3070, BD+34 1543 and Feige 87 are long period sdB + MS binaries on
clearly eccentric orbits. These results are in conflict with the predictions of
stable Roche-lobe overflow models.Comment: 15 pages, 6 figures, Accepted by A&
Improved Design Formulae for Buckling of Orthotropic Plates under Combined Loading
Simple, accurate buckling interaction formulae are presented for long orthotropic plates with either simply supported or clamped longitudinal edges and under combined loading that are suitable for design studies. The loads include 1) combined uniaxial compression (or tension) and shear, 2) combined pure inplane bending and 3) shear and combined uniaxial compression (or tension) and pure inplane bending. The interaction formulae are the results of detailed regression analysis of buckling data obtained from a very accurate Rayleigh-Ritz method
Use of mixed-gas rebreathers to access fish assemblages in Mesophotic Coral Ecosystems (MCE) off La Parguera shelf-edge, Puerto Rico
- …