Single-Photon Observables and Preparation Uncertainty Relations

We propose a procedure for defining all single-photon observables in terms of Positive-Operator Valued Measures (POVMs), in particular spin and position. We identify the suppression of $0$-helicity photon states as a projection from an extended Hilbert space onto the photon Hilbert space. We show that all single-photon observables are in general described by POVMs, obtained by applying this projection to opportune Projection-Valued Measures (PVMs), defined on the extended Hilbert space. The POVMs associated to momentum and helicity reduce to PVMs, unlike those associated to position and spin, this fact reflecting the intrinsic unsharpness of these observables. We finally extensively study the preparation uncertainty relations for position and momentum and the probability distribution of spin, exploring single photon Gaussian states for several choices of spin and polarization.Comment: 25 pages (7 Figures); revised and extended version; in submissio

21 July 1969

In the middle of the Cold War, the space race began on 4 October 1957, when the Soviet Union successfully put Sputnik 1, the first artificial satellite, into orbit around Earth, shocking the world and, particularly, the Americans, who felt that their U.S. technological supremacy was being menace

COMPARISON OF LOW COST PHOTOGRAMMETRIC SURVEY WITH TLS AND LEICA PEGASUS BACKPACK 3D MODELS

This paper considers Leica backpack and photogrammetric surveys of a mediaeval bastion in Padua, Italy. Furhtermore, terrestrial laser scanning (TLS) survey is considered in order to provide a state of the art reconstruction of the bastion. Despite control points are typically used to avoid deformations in photogrammetric surveys and ensure correct scaling of the reconstruction, in this paper a different approach is considered: this work is part of a project aiming at the development of a system exploiting ultra-wide band (UWB) devices to provide correct scaling of the reconstruction. In particular, low cost Pozyx UWB devices are used to estimate camera positions during image acquisitions. Then, in order to obtain a metric reconstruction, scale factor in the photogrammetric survey is estimated by comparing camera positions obtained from UWB measurements with those obtained from photogrammetric reconstruction. Compared with the TLS survey, the considered photogrammetric model of the bastion results in a RMSE of 21.9cm, average error 13.4cm, and standard deviation 13.5cm. Excluding the final part of the bastion left wing, where the presence of several poles make reconstruction more difficult, (RMSE) fitting error is 17.3cm, average error 11.5cm, and standard deviation 9.5cm. Instead, comparison of Leica backpack and TLS surveys leads to an average error of 4.7cm and standard deviation 0.6cm (4.2 cm and 0.3 cm, respectively, by excluding the final part of the left wing)

Quantum work statistics with initial coherence

The two-point measurement scheme for computing the thermodynamic work performed on a system requires it to be initially in equilibrium. The Margenau–Hill scheme, among others, extends the previous approach to allow for a non-equilibrium initial state. We establish a quantitative comparison between both schemes in terms of the amount of coherence present in the initial state of the system, as quantified by the l1-coherence measure. We show that the difference between the two first moments of work, the variances of work, and the average entropy production obtained in both schemes can be cast in terms of such initial coherence. Moreover, we prove that the average entropy production can take negative values in the Margenau–Hill framework

Transient increases in intracellular calcium and reactive oxygen species levels in TCam-2 cells exposed to microgravity

The effects of microgravity on functions of the human body are well described, including alterations in the male and female reproductive systems. In the present study, TCam-2 cells, which are considered a good model of mitotically active male germ cells, were used to investigate intracellular signalling and cell metabolism during exposure to simulated microgravity, a condition that affects cell shape and cytoskeletal architecture. After a 24 hour exposure to simulated microgravity, TCam-2 cells showed 1) a decreased proliferation rate and a delay in cell cycle progression, 2) increased anaerobic metabolism accompanied by increased levels of intracellular Ca(2+), reactive oxygen species and superoxide anion and modifications in mitochondrial morphology. Interestingly, all these events were transient and were no longer evident after 48 hours of exposure. The presence of antioxidants prevented not only the effects described above but also the modifications in cytoskeletal architecture and the activation of the autophagy process induced by simulated microgravity. In conclusion, in the TCam-2 cell model, simulated microgravity activated the oxidative machinery, triggering transient macroscopic cell events, such as a reduction in the proliferation rate, changes in cytoskeleton-driven shape and autophagy activation

Maximizing Vanadium Redox Flow Battery Efficiency: Strategies of Flow Rate Control

Vanadium redox flow batteries (VRFBs) are one of the most promising technologies for large-scale energy storage due to their flexible energy and power capacity configurations. The energy losses evaluation assumes a very important rule on the VRFB characterization in order increase the efficiency of the battery. Very few papers describe the relations between hydraulic, electrical and chemical contributions to the system energy losses, especially in a large size VRFB system. In the first part a fluid dynamics characterization of a 9kW / 27 kWh VRFB test facility has been conducted. In particular, we will consider the internal resistance as the sum of an ohmic and a transport resistance. Secondly, an overall loss assessment based on both numerical and experimental results has been carried out. Finally, some improvements in the battery management strategy and in stack engineering are proposed, that results from this work and can help the future designer to develop more efficient VRFB stack with a compact design

Differences in the activity and distribution of peroxidase from three different portions of germinative Brassica oleracea seeds.

Peroxidase (POD, EC 1.11.1.7) activity, cellular localization and isozyme patterns were investigated in the seed integument, cotyledon and embryo axis of Brassica oleracea cv. Cappuccio during pregermination and seedling growth. Seeds started to germinate after 24 h of imbibition. POD activity was localized in the pigmented layer of the integument and in procambial strands of the cotyledon and embryo axis in the first 24 h of imbibition. It was localized in the integumental cells of palisade, pigmented and aleurone layers and in epidermal, meristematic, procambial cells and xylem elements of the root and hypocotyl after 48 h of imbibition. POD activity increased during germination and early seedling growth: in the integument, it reached a maximum value after 72 h of imbibition, in the embryo axis and cotyledons, it increased up to 144 h of imbibition. The increase in peroxidase activity was accompanied by the appearance of new isozymes correlated with the development of seedling tissues. The isozyme profile was characterized by nine peroxidases: isoperoxidase of 50 kDa peculiar to integuments, that of 150 kDa to cotyledons and that of 82 kDa to the embryo axis. During pregerminative phase isozymes of 84 kDa were detected in the integument and cotyledons, of 48.5 kDa in the embryo axis. After germination, peroxidase activity and the complexity of the isozyme pattern increased, suggesting that they play a relevant role after rupture of the integument

Enhancing the efficiency of kW-class vanadium redox flow batteries by flow factor modulation: An experimental method

he paper presents a control method of the electrolyte flow factor in kW-class Vanadium Redox Flow Batteries that minimizes transport losses without affecting the battery's electrical performance. This method uses experimental data acquired on a 9 kW/27 kWh test facility at varying operating conditions. The effects of overpotentials on the polarization curves are then modeled as non-linear electrical resistances that vary with the stack current, state of charge and electrolyte flow rates. Our analysis of these variables shows that the optimal performance is found if the flow factor is modulated during operation according to stack current and the battery state, so as to minimize the overall flow-dependent losses. The optimal profiles have been identified as functions of the battery's operating conditions. Based on these results, a dynamic control for the electrolyte flow rates has been implemented at a software level (i.e. without modifying the hardware of the test facility), which is capable of maximizing the round-trip efficiency and exceeds the performance achieved with a constant flow factor strategy, as proposed in previous literature. The implementation of the optimal flow rate control requires a preliminary test campaign to collect performance data, which are then used in the control protocol to manage the battery's operation. This scheme is easily implementable at a software level in other industrial redox flow batteries

Modelling a Coupled Thermoelectromechanical Behaviour of Contact Elements via Fractal Surfaces

A three-dimensional coupled thermoelectromechanical model for electrical connectors is here proposed to evaluate local stress and temperature distributions around the contact area of electric connectors under different applied loads. A micromechanical numerical model has been developed by merging together the contact theory approach, which makes use of the so-called roughness parameters obtained from experimental measurements on real contact surfaces, with the topology description of the rough surface via the theory of fractal geometry. Particularly, the variation of asperities has been evaluated via the Weierstrass-Mandelbrot function. In this way the micromechanical model allowed for an upgraded contact algorithm in terms of effective contact area and thermal and electrical contact conductivities. Such an algorithm is subsequently implemented to construct a global model for performing transient thermoelectromechanical analyses without the need of simulating roughness asperities of contact surfaces, so reducing the computational cost. A comparison between numerical and analytical results shows that the adopted procedure is suitable to simulate the transient thermoelectromechanical response of electric connectors