Computer-assisted ex vivo, normothermic small bowel perfusion

Background: In the present study, a technique for computer-assisted, normothermic, oxygenated, ex vivo, recirculating small bowel perfusion was established as a tool to investigate organ pretreatment protocols and ischemia/reperfusion phenomena. A prerequisite for the desired setup was an organ chamber for ex vivo perfusion and the use of syngeneic whole blood as perfusate. Methods: The entire small bowel was harvested from Lewis rats and perfused in an organ chamber ex vivo for at least 2 h. The temperature was kept at 37 degrees C in a water bath. Three experimental groups were explored, characterized by different perfusion solutions. The basic perfusate consisted of syngeneic whole blood diluted with either NaCl, Krebs' solution or Krebs' solution and norepinephrine to a hematocrit of 30%. In addition, in each group l-glutamine was administered intraluminally. The desired perfusion pressure was 100 mm Hg which was kept constant with a computer-assisted data acquisition software, which measured an-line pressure, oxygenation, flow, temperature and pH and adjusted the pressure by changing the flow via a peristaltic pump. The viability of the preparation was tested by measuring oxygen consumption and maltose absorption, which requires intact enzymes of the mucosal brush border to break down maltose into glucose. Results: Organ perfusion in group 1 (dilution with NaCl) revealed problems such as hypersecretion into the bowel lumen, low vascular resistance and no maltose uptake. In contrast a viable organ could be demonstrated using Krebs' solution as dilution solution. The addition of norepinephrine led to an improved perfusion over the entire perfusion period. Maltose absorption was comparable to tests conducted with native small bower. Oxygen consumption was stable during the 2-hour perfusion period. Conclusions: The ex vivo perfusion system established enables small bowel perfusion for at least 2 h. The viability of the graft could be demonstrated. The perfusion time achieved is sufficient to study leukocyte/lymphocyte interaction with the endothelium of the graft vessels. In addition, a viable small bowel, after 2 h of ex vivo perfusion, facilitates testing of pretreatment protocols for the reduction of the immunogenicity of small bowel allografts. Copyright (C) 2000 S. Karger AG, Basel

A cytogenetical study of Ischyroceridae (Amphipoda) allows the identification of a new species, Jassa cadetta sp. n., in the Lagoon of Venice

n/

Different environmental variables predict body and brain size evolution in Homo

Increasing body and brain size constitutes a key macro-evolutionary pattern in the hominin lineage, yet the mechanisms behind these changes remain debated. Hypothesized drivers include environmental, demographic, social, dietary, and technological factors. Here we test the influence of environmental factors on the evolution of body and brain size in the genus Homo over the last one million years using a large fossil dataset combined with global paleoclimatic reconstructions and formalized hypotheses tested in a quantitative statistical framework. We identify temperature as a major predictor of body size variation within Homo, in accordance with Bergmann’s rule. In contrast, net primary productivity of environments and long-term variability in precipitation correlate with brain size but explain low amounts of the observed variation. These associations are likely due to an indirect environmental influence on cognitive abilities and extinction probabilities. Most environmental factors that we test do not correspond with body and brain size evolution, pointing towards complex scenarios which underlie the evolution of key biological characteristics in later Homo.Introduction Results - Approach of power analysis and linear regressions - Power analysis of synthetic data - Analysis of fossil data Discussion Methods - Body and brain size database - Climate reconstructions - Synthetic datasets and power analysi

Addendum: High-resolution terrestrial climate, bioclimate and vegetation for the last 120,000 years.

Funder: European Research Council Grant 647797Abstract: The variability of climate has profoundly impacted a wide range of macroecological processes in the Late Quaternary. Our understanding of these has greatly benefited from palaeoclimate simulations, however, high-quality reconstructions of ecologically relevant climatic variables have thus far been limited to a few selected time periods. Here, we present a 0.5° resolution bias-corrected dataset of global monthly temperature, precipitation, cloud cover, relative humidity and wind speed, 17 bioclimatic variables, annual net primary productivity, leaf area index and biomes, covering the last 120,000 years at a temporal resolution of 1,000–2,000 years. We combined medium-resolution HadCM3 climate simulations of the last 120,000 years with high-resolution HadAM3H simulations of the last 21,000 years, and modern-era instrumental data. This allows for the temporal variability of small-scale features whilst ensuring consistency with observed climate. Our data make it possible to perform continuous-time analyses at a high spatial resolution for a wide range of climatic and ecological applications - such as habitat and species distribution modelling, dispersal and extinction processes, biogeography and bioanthropology

Climatic windows for human migration out of Africa in the past 300,000 years.

Whilst an African origin of modern humans is well established, the timings and routes of their expansions into Eurasia are the subject of heated debate, due to the scarcity of fossils and the lack of suitably old ancient DNA. Here, we use high-resolution palaeoclimate reconstructions to estimate how difficult it would have been for humans in terms of rainfall availability to leave the African continent in the past 300k years. We then combine these results with an anthropologically and ecologically motivated estimate of the minimum level of rainfall required by hunter-gatherers to survive, allowing us to reconstruct when, and along which geographic paths, expansions out of Africa would have been climatically feasible. The estimated timings and routes of potential contact with Eurasia are compatible with archaeological and genetic evidence of human expansions out of Africa, highlighting the key role of palaeoclimate variability for modern human dispersals

SEMIC: an efficient surface energy and mass balance model applied to the Greenland ice sheet

We present SEMIC, a Surface Energy and Mass balance model of Intermediate Complexity for snow- and ice-covered surfaces such as the Greenland ice sheet. SEMIC is fast enough for glacial cycle applications, making it a suitable replacement for simpler methods such as the positive degree day (PDD) method often used in ice sheet modelling. Our model explicitly calculates the main processes involved in the surface energy and mass balance, while maintaining a simple interface and requiring minimal data input to drive it. In this novel approach, we parameterise diurnal temperature variations in order to more realistically capture the daily thaw–freeze cycles that characterise the ice sheet mass balance. We show how to derive optimal model parameters for SEMIC specifically to reproduce surface characteristics and day-to-day variations similar to the regional climate model MAR (Modèle Atmosphérique Régional, version 2) and its incorporated multilayer snowpack model SISVAT (Soil Ice Snow Vegetation Atmosphere Transfer). A validation test shows that SEMIC simulates future changes in surface temperature and surface mass balance in good agreement with the more sophisticated multilayer snowpack model SISVAT included in MAR. With this paper, we present a physically based surface model to the ice sheet modelling community that is general enough to be used with in situ observations, climate model, or reanalysis data, and that is at the same time computationally fast enough for long-term integrations, such as glacial cycles or future climate change scenarios

The significance of motivation in student-centred learning : a reflective case study

The theoretical underpinnings of student-centred learning suggest motivation to be an integral component. However, lack of clarification of what is involved in motivation in education often results in unchallenged assumptions that fail to recognise that what motivates some students may alienate others. This case study, using socio-cognitive motivational theory to analyse previously collected data, derives three fuzzy propositions which, collectively, suggest that motivation interacts with the whole cycle of episodes in the teachinglearning process. It argues that the development of the higherlevel cognitive competencies that are implied by the term, student-centred learning, must integrate motivational constructs such as goal orientation, volition, interest and attributions into pedagogical practices

A Fast second-order solver for stiff multifluid dust and gas hydrodynamics

We present MDIRK: a Multifluid second-order Diagonally-Implicit Runge-Kutta method to study momentum transfer between gas and an arbitrary number ($N$) of dust species. The method integrates the equations of hydrodynamics with an Implicit Explicit (IMEX) scheme and solves the stiff source term in the momentum equation with a diagonally-implicit asymptotically stable Runge-Kutta method (DIRK). In particular, DIRK admits a simple analytical solution that can be evaluated with $\mathcal{O}(N)$ operations, instead of standard matrix inversion, which is $\mathcal{O}(N)^3$. Therefore the analytical solution significantly reduces the computational cost of the multifluid method, making it suitable for studying the dynamics of systems with particle-size distributions. We demonstrate that the method conserves momentum to machine precision and converges to the correct equilibrium solution with constant external acceleration. To validate our numerical method we present a series of simple hydrodynamic tests, including damping of sound waves, dusty shocks, a multi-fluid dusty Jeans instability, and a steady-state gas-dust drift calculation. The simplicity of MDIRK lays the groundwork to build fast high-order asymptotically stable multifluid methods.Comment: 21 pages, 7 figures, accepted for publication ApJ

RAM: Rapid Advection Algorithm on Arbitrary Meshes

The study of many astrophysical flows requires computational algorithms that can capture high Mach number flows, while resolving a large dynamic range in spatial and density scales. In this paper we present a novel method, RAM: Rapid Advection Algorithm on Arbitrary Meshes. RAM is a time-explicit method to solve the advection equation in problems with large bulk velocity on arbitrary computational grids. In comparison with standard up-wind algorithms, RAM enables advection with larger time steps and lower truncation errors. Our method is based on the operator splitting technique and conservative interpolation. Depending on the bulk velocity and resolution, RAM can decrease the numerical cost of hydrodynamics by more than one order of magnitude. To quantify the truncation errors and speed-up with RAM, we perform one and two-dimensional hydrodynamics tests. We find that the order of our method is given by the order of the conservative interpolation and that the effective speed up is in agreement with the relative increment in time step. RAM will be especially useful for numerical studies of disk-satellite interaction, characterized by high bulk orbital velocities, and non-trivial geometries. Our method dramatically lowers the computational cost of simulations that simultaneously resolve the global disk and well inside the Hill radius of the secondary companion.Comment: 15 pages, 7 figures. Submitted to ApJ. Comments are welcom