10,275 research outputs found
Miniature infrared data acquisition and telemetry system
The Miniature Infrared Data Acquisition and Telemetry (MIRDAT) Phase 1 study was performed to determine the technical and commercial feasibility of producing a miniaturized electro-optical telemetry system. This system acquires and transmits experimental data from aircraft scale models for realtime monitoring in wind tunnels. During the Phase 1 study, miniature prototype MIRDAT telemetry devices were constructed, successfully tested in the laboratory and delivered to the user for wind tunnel testing. A search was conducted for commercially available components and advanced hybrid techniques to further miniaturize the system during Phase 2 development. A design specification was generated from laboratory testing, user requirements and discussions with component manufacturers. Finally, a preliminary design of the proposed MIRDAT system was documented for Phase 2 development
Multifactorial analysis of human blood cell responses to clinical total body irradiation
Multiple regression analysis techniques are used to study the effects of therapeutic radiation exposure, number of fractions, and time on such quantal responses as tumor control and skin injury. The potential of these methods for the analysis of human blood cell responses is demonstrated and estimates are given of the effects of total amount of exposure and time of protraction in determining the minimum white blood cell concentration observed after exposure of patients from four disease groups
Parity-expanded variational analysis for non-zero momentum
In recent years, the use of variational analysis techniques in lattice QCD
has been demonstrated to be successful in the investigation of the rest-mass
spectrum of many hadrons. However, due to parity-mixing, more care must be
taken for investigations of boosted states to ensure that the projected
correlation functions provided by the variational analysis correspond to the
same states at zero momentum. In this paper we present the Parity-Expanded
Variational Analysis (PEVA) technique, a novel method for ensuring the
successful and consistent isolation of boosted baryons through a parity
expansion of the operator basis used to construct the correlation matrix.Comment: 9 pages, 3 figures, 1 tabl
Stochastic Stokes' drift of a flexible dumbbell
We consider the stochastic Stokes drift of a flexible dumbbell. The dumbbell
consists of two isotropic Brownian particles connected by a linear spring with
zero natural length, and is advected by a sinusoidal wave. We find an
asymptotic approximation for the Stokes drift in the limit of a weak wave, and
find good agreement with the results of a Monte Carlo simulation. We show that
it is possible to use this effect to sort particles by their flexibility even
when all the particles have the same diffusivity.Comment: 12 pages, 1 figur
The Glasgow outcome at discharge scale: an inpatient assessment of disability after brain injury
This study assesses the validity and reliability of the Glasgow Outcome at Discharge Scale (GODS), which is a tool that is designed to assess disability after brain injury in an inpatient setting. It is derived from the Glasgow Outcome Scale-Extended (GOS-E), which assesses disability in the community after brain injury. Inter-rater reliability on the GODS is high (quadratic-weighted kappa 0.982; 95% confidence interval [CI] 0.968, 0.996) as is concurrent validity with the Disability Rating Scale (DRS) (Spearman correlation −0.728; 95% CI −0.819, −0.601). The GODS is significantly associated with physical and fatigue subscales of the short form (SF)-36 in hospital. In terms of predictive validity the GODS is highly associated with the GOS-E after discharge (Spearman correlation 0.512; 95% CI 0.281, 0.687), with the DRS, and with physical, fatigue, and social subscales of the SF-36. The GODS is recommended as an assessment tool for disability after brain injury pre-discharge and can be used in conjunction with the GOS-E to monitor disability between hospital and the community
Analytical modeling of the structureborne noise path on a small twin-engine aircraft
The structureborne noise path of a six passenger twin-engine aircraft is analyzed. Models of the wing and fuselage structures as well as the interior acoustic space of the cabin are developed and used to evaluate sensitivity to structural and acoustic parameters. Different modeling approaches are used to examine aspects of the structureborne path. These approaches are guided by a number of considerations including the geometry of the structures, the frequency range of interest, and the tractability of the computations. Results of these approaches are compared with experimental data
Monte Carlo aided design of the inner muon veto detectors for the Double Chooz experiment
The Double Chooz neutrino experiment aims to measure the last unknown
neutrino mixing angle theta_13 using two identical detectors positioned at
sites both near and far from the reactor cores of the Chooz nuclear power
plant. To suppress correlated background induced by cosmic muons in the
detectors, they are protected by veto detector systems. One of these systems is
the inner muon veto. It is an active liquid scintillator based detector and
instrumented with encapsulated photomultiplier tubes. In this paper we describe
the Monte Carlo aided design process of the inner muon veto, that resulted in a
detector configuration with 78 PMTs yielding an efficiency of 99.978 +- 0.004%
for rejecting muon events and an efficiency of >98.98% for rejecting correlated
events induced by muons. A veto detector of this design is currently used at
the far detector site and will be built and incorporated as the muon
identification system at the near site of the Double Chooz experiment
Thin-film flow in helically wound shallow channels of arbitrary cross-sectional shape
We consider the steady, gravity-driven flow of a thin film of viscous fluid down a helically wound shallow channel of arbitrary cross-sectional shape with arbitrary torsion and curvature. This extends our previous work [D. J. Arnold et al., “Thin-film flow in helically-wound rectangular channels of arbitrary torsion and curvature,” J. Fluid Mech. 764, 76–94 (2015)] on channels of rectangular cross section. The Navier-Stokes equations are expressed in a novel, non-orthogonal coordinate system fitted to the channel bottom. By assuming that the channel depth is small compared to its width and that the fluid depth in the vertical direction is also small compared to its typical horizontal extent, we are able to solve for the velocity components and pressure analytically. Using these results, a differential equation for the free surface shape is obtained, which must in general be solved numerically. Motivated by the aim of understanding flows in static spiral particle separators used in mineral processing, we investigate the effect of cross-sectional shape on the secondary flow in the channel cross section. We show that the competition between gravity and inertia in non-rectangular channels is qualitatively similar to that in rectangular channels, but that the cross-sectional shape has a strong influence on the breakup of the secondary flow into multiple clockwise-rotating cells. This may be triggered by small changes to the channel geometry, such as one or more bumps in the channel bottom that are small relative to the fluid depth. In contrast to the secondary flow which is quite sensitive to small bumps in the channel bottom, the free-surface profile is relatively insensitive to these. The sensitivity of the flow to the channel geometry may have important implications for the design of efficient spiral particle separators.D. J. Arnold, Y. M. Stokes, and J. E. F. Gree
- …