Tapered photonic crystal microcavities embedded in photonic wire waveguides with large resonance quality-factor and high transmission

We present the design, fabrication, and characterization of a microcavity that exhibits simultaneously high transmission and large resonance quality-factor (Q-factor). This microcavity is formed by a single-row photonic crystal (PhC) embedded in a 500-nm-wide photonic wire waveguide - and is based on silicon-on-insulator. A normalized transmission of 85%, together with a Q-factor of 18 500, have been achieved experimentally through the use of carefully designed tapering on both sides of each of the hole-type PhC mirrors that form the microcavity. We have also demonstrated reasonably accurate control of the cavity resonance frequency. Simulation of the device using a three-dimensional finite-difference time-domain approach shows good agreement with the experimental results

Tuning effective interactions close to the critical point in colloidal suspensions

We report a numerical investigation of two colloids immersed in a critical solvent, with the aim of quantifying the effective colloid-colloid interaction potential. By turning on an attraction between the colloid and the solvent particles we follow the evolution from the case in which the solvent density close to the colloids changes from values smaller than the bulk to values larger than the bulk. We thus effectively implement the so-called $(+,+)$ and $(-,-)$ boundary conditions defined in field theoretical approaches focused on the description of critical Casimir forces. We find that the effective potential at large distances decays exponentially, with a characteristic decay length compatible with the bulk critical correlation length, in full agreement with theoretical predictions. We also investigate the case of $(+,-)$ boundary condition, where the effective potential becomes repulsive. Our study provides a guidance for a design of the interaction potential which can be exploited to control the stability of colloidal systems

Crystal-to-crystal transition of ultrasoft colloids under shear

Ultrasoft colloids typically do not spontaneously crystallize, but rather vitrify, at high concentrations. Combining in-situ rheo-SANS experiments and numerical simulations we show that shear facilitates crystallization of colloidal star polymers in the vicinity of their glass transition. With increasing shear rate well beyond rheological yielding, a transition is found from an initial bcc-dominated structure to an fcc-dominated one. This crystal-to-crystal transition is not accompanied by intermediate melting but occurs via a sudden reorganization of the crystal structure. Our results provide a new avenue to tailor colloidal crystallization and crystal-to-crystal transition at molecular level by coupling softness and shear

Integrating cross-border acquisitions: a process-oriented approach

Acquisizioni o fusioni spesso falliscono nel creare valore per gli azionisti poiché, nella maggior parte dei casi, le modalità di integrazione impediscono di sviluppare le opportune sinergie. Questo argomento è stato affrontato da molti studi secondo due differenti filoni di pensiero: il primo guarda alla combinazione di risorse a disposizione dopo l’acquisizione e il secondo si focalizza sul fattore umano. Lo studio propone un modello integrato, dove gli effetti di questi aspetti sono testati simultaneamente e considera tre variabili indipendenti: l’importanza della pianificazione del processo, la conoscenza derivante da acquisizioni precedenti e la conoscenza derivante da relazioni precedenti. Crediamo che attraverso questo modello i manager possano prioritizzare le loro azioni e selezionare un orizzonte temporale appropriato per l’integrazione.Acquisitions and mergers of equals often fail to deliver shareholder value, largely because poor integration practices do not allow synergies to be created. The issue has been addressed by several studies from two different research streams: the first looks at the combination of resources after the acquisitions and the second focuses on the human factor. We propose an integrated model where the effects of these key aspects are tested simultaneously and where three independent variables are included: the extent of planning and knowledge from previous acquisitions and knowledge from previous relationships. We believe that through the model managers can prioritise their actions and select an appropriate time horizon for the integratio

Pressure-energy correlations in liquids. V. Isomorphs in generalized Lennard-Jones systems

This series of papers is devoted to identifying and explaining the properties of strongly correlating liquids, i.e., liquids with more than 90% correlation between their virial W and potential energy U fluctuations in the NVT ensemble. Paper IV [N. Gnan et al., J. Chem. Phys. v131, 234504 (2009)] showed that strongly correlating liquids have "isomorphs", which are curves in the phase diagram along which structure, dynamics, and some thermodynamic properties are invariant in reduced units. In the present paper, using the fact that reduced-unit radial distribution functions are isomorph invariant, we derive an expression for the shapes of isomorphs in the WU phase diagram of generalized Lennard-Jones systems of one or more types of particles. The isomorph shape depends only on the Lennard-Jones exponents; thus all isomorphs of standard Lennard-Jones systems (with exponents 12 and 6) can be scaled onto to a single curve. Two applications are given. One is testing the prediction that the solid-liquid coexistence curve follows an isomorph by comparing to recent simulations by Ahmed and Sadus [J. Chem. Phys. v131, 174504 (2009)]. Excellent agreement is found on the liquid side of the coexistence, whereas the agreement is worse on the solid side. A second application is the derivation of an approximate equation of state for generalized Lennard-Jones systems by combining the isomorph theory with the Rosenfeld-Tarazona expression for the temperature dependence of potential energy on isochores. It is shown that the new equation of state agrees well with simulations.Comment: 12 pages, 14 figures, Section on solid-liquid coexistence expande

Properties of patchy colloidal particles close to a surface: a Monte Carlo and density functional study

We investigate the behavior of a patchy particle model close to a hard-wall via Monte Carlo simulation and density functional theory (DFT). Two DFT approaches, based on the homogeneous and inhomogeneous versions of Wertheim's first order perturbation theory for the association free energy are used. We evaluate, by simulation and theory, the equilibrium bulk phase diagram of the fluid and analyze the surface properties for two isochores, one of which is close to the liquid side of the gas-liquid coexistence curve. We find that the density profile near the wall crosses over from a typical high-temperature adsorption profile to a low-temperature desorption one, for the isochore close to coexistence. We relate this behavior to the properties of the bulk network liquid and find that the theoretical descriptions are reasonably accurate in this regime. At very low temperatures, however, an almost fully bonded network is formed, and the simulations reveal a second adsorption regime which is not captured by DFT. We trace this failure to the neglect of orientational correlations of the particles, which are found to exhibit surface induced orientational order in this regime

A randomised feasibility trial of an intervention to support sharing of HIV status for 18-25-year olds living with perinatally acquired HIV compared with standard care: HIV Empowering Adults' Decisions to Share-UK/Uganda Project (HEADS-UP)

Abstract: Background: Young adults with perinatally acquired HIV (PAH) face several challenges, including adhering to antiretroviral therapy (ART), managing the risk of onward HIV transmission and maintaining positive well-being. Sharing one's HIV status with others (onward HIV disclosure) may assist with these challenges by facilitating emotional and practical support. Rates of HIV status sharing are, however, low in this population. There are no existing interventions focused on sharing one's HIV status for young adults living with PAH. The HEADS-UP study is designed to develop and test the feasibility of an intervention to help the sharing of HIV status for young adults with PAH. Methods: The study is a 30-month multi-site randomised feasibility study across both a high-income/low-HIV prevalence country (UK) and a low-income/high-HIV prevalence country (Uganda). Phase 1 (12 months) will involve developing the intervention using qualitative interviews with 20 young people living with PAH (ten in the UK-18 to 29 years; ten in Uganda-18 to 25 years), 20 of their social network (friends, family, sexual partners as defined by the young person; ten in the UK, ten in Uganda) and ten professionals with experience working with young adults with PAH (five in the UK, five in Uganda). Phase 2 (18 months) involves conducting a randomised feasibility parallel group trial of the intervention alongside current standard of care condition in each country (main study) with 18- to 25-year olds with PAH. A sample size of 94 participants per condition (intervention or standard of care; 188 participants in total: 47 in each condition in each country) with data at both the baseline and 6-month follow-up time points, across UK and Ugandan sites will be recruited. Participants in the intervention condition will also complete measures immediately post-intervention. Face-to-face interviews will be conducted with ten participants in both countries immediately post-intervention and at 6-month follow-up (sub-study). Discussion: This study will be the first trial that we are aware of to address important gaps in understanding acceptable and feasible ways of delivering HIV status sharing support for young people living with PAH. Trial registration: ISRCTN Registry, ISRCTN31852047, Registered on 21 January, 2019. Study sponsor: Royal Holloway University of London. Sponsor contact: [email protected]. Date and version: April 2020. Protocol version 3.5

Modelling of photonic wire Bragg Gratings

Some important properties of photonic wire Bragg grating structures have been investigate. The design, obtained as a generalisation of the full-width gap grating, has been modelled using 3D finite-difference time-domain simulations. Different types of stop-band have been observed. The impact of the grating geometry on the lowest order (longest wavelength) stop-band has been investigated - and has identified deeply indented configurations where reduction of the stop-bandwidth and of the reflectivity occurred. Our computational results have been substantially validated by an experimental demonstration of the fundamental stop-band of photonic wire Bragg gratings fabricated on silicon-on-insulator material. The accuracy of two distinct 2D computational models based on the effective index method has also been studied - because of their inherently much greater rapidity and consequent utility for approximate initial designs. A 2D plan-view model has been found to reproduce a large part of the essential features of the spectral response of full 3D models

Nuclear organisation and replication timing are coupled through RIF1-PP1 interaction

Three-dimensional genome organisation and replication timing are known to be correlated, however, it remains unknown whether nuclear architecture overall plays an instructive role in the replication-timing programme and, if so, how. Here we demonstrate that RIF1 is a molecular hub that co-regulates both processes. Both nuclear organisation and replication timing depend upon the interaction between RIF1 and PP1. However, whereas nuclear architecture requires the full complement of RIF1 and its interaction with PP1, replication timing is not sensitive to RIF1 dosage. The role of RIF1 in replication timing also extends beyond its interaction with PP1. Availing of this separation-of-function approach, we have therefore identified in RIF1 dual function the molecular bases of the co-dependency of the replication-timing programme and nuclear architecture

Relationship between Structure, Entropy and Diffusivity in Water and Water-like Liquids

Anomalous behaviour of the excess entropy ($S_e$) and the associated scaling relationship with diffusivity are compared in liquids with very different underlying interactions but similar water-like anomalies: water (SPC/E and TIP3P models), tetrahedral ionic melts (SiO$_2$ and BeF$_2$) and a fluid with core-softened, two-scale ramp (2SRP) interactions. We demonstrate the presence of an excess entropy anomaly in the two water models. Using length and energy scales appropriate for onset of anomalous behaviour, the density range of the excess entropy anomaly is shown to be much narrower in water than in ionic melts or the 2SRP fluid. While the reduced diffusivities ($D^*$) conform to the excess entropy scaling relation, $D^* =A\exp (\alpha S_e)$ for all the systems (Y. Rosenfeld, Phys. Rev. A {\bf 1977}, {\it 15}, 2545), the exponential scaling parameter, $\alpha$, shows a small isochore-dependence in the case of water. Replacing $S_e$ by pair correlation-based approximants accentuates the isochore-dependence of the diffusivity scaling. Isochores with similar diffusivity scaling parameters are shown to have the temperature dependence of the corresponding entropic contribution. The relationship between diffusivity, excess entropy and pair correlation approximants to the excess entropy are very similar in all the tetrahedral liquids.Comment: 24 pages, 4 figures, to be published in Journal of Physical Chemistry