7,410 research outputs found
The influence of long-term inputs of catch crops and cereal straw on yield, protein composition and technological quality of a spring and a winter wheat
Under conditions of restricted nitrogen (N) input such as in organic farming systems, crop N uptake must rely on N mineralised from applied animal manure, crop residues and native soil organic matter. Scarcity of N may impede the production of quality grain for bread production, and input and retention of N in soil are therefore important parameters for soil fertility. Toretain N in the crop-soilsystem, catch crops may be grown in breaks between main crops where they provide a significant sink for N mineralised in late summer and autumn (Thomsen, 2005). In corporation of straw may likewise retain mineralised N by microbial immobilisation (Christensen, 1986) and will also directly add to the N mineralisation potential when the N supplied in the straw accumulates (Thomsen & Christensen, 2004). Under northern European conditions, winter wheat may generally be of lower quality than spring wheat, but winter wheat has a higher yield potential. When the N uptake is mainly based on N mineralised from either applied or indigenous soil organic matter, however, this may even out the quality difference between winter and spring wheat as the longer growing season of winter wheat may boost its N utilisation. Growing conditions are highly important for protein quantity whereas main lygenetic factors influence protein composition (Amesetal., 1999; Luoetal., 2000). Wheat grain proteins have been classified as albumins, globulins, gliadins and glutenins on the basis of their solubility (Osborne, 1907). Reverse-phase (RP) high performance liquid chromatography (HPLC) allows the quantitative determination of these different flour protein groups together with single proteins (α5-, α1,2-, α-, γc-type gliadins, x- and γ-type high (HMW) and low (LMW) molecular weights subunits of glutenin) (Wieser & Seilmeier, 1998). The proteins can also be divided into polymers (glutenins) or monomers (gliadins, albumins, globulins) based on their aggregating properties. The polymeric proteins are critical for governing wheat flour processing properties, and their quantity and size distribution reliably measured by size-exclusion (SE) HPLC techniques have been shown to be important indicators of baking quality (Dachkevitch & Autran, 1989; Bateyetal., 1991). The aim of this study was to examine whether wheat yield and baking quality determined by chromatographic techniques together with rheological and chemical quality measurements could be improved by combining agronomic strategies consisting of wheat cultivars and long-term organic matter inputs. The variables tested were (A) a winter wheat and a spring wheat cultivar, (B) three catch crop strategies and (C) four straw incorporation rates
Chirality distribution and transition energies of carbon nanotubes
From resonant Raman scattering on isolated nanotubes we obtained the optical
transition energies, the radial breathing mode frequency and Raman intensity of
both metallic and semiconducting tubes. We unambiguously assigned the chiral
index (n_1,n_2) of approximately 50 nanotubes based solely on a third-neighbor
tight-binding Kataura plot and find omega_RBM=214.4cm^-1nm/d+18.7cm^-1. In
contrast to luminescence experiments we observe all chiralities including
zig-zag tubes. The Raman intensities have a systematic chiral-angle dependence
confirming recent ab-initio calculations.Comment: 4 pages, to be published in Phys. Rev. Let
Extreme non-linear response of ultra-narrow optical transitions in cavity QED for laser stabilization
We explore the potential of direct spectroscopy of ultra-narrow optical
transitions of atoms localized in an optical cavity. In contrast to
stabilization against a reference cavity, which is the approach currently used
for the most highly stabilized lasers, stabilization against an atomic
transition does not suffer from Brownian thermal noise. Spectroscopy of
ultra-narrow optical transitions in a cavity operates in a very highly
saturated regime in which non-linear effects such as bistability play an
important role. From the universal behavior of the Jaynes-Cummings model with
dissipation, we derive the fundamental limits for laser stabilization using
direct spectroscopy of ultra-narrow atomic lines. We find that with current
lattice clock experiments, laser linewidths of about 1 mHz can be achieved in
principle, and the ultimate limitations of this technique are at the 1 Hz
level.Comment: 5 pages, 4 figure
Ion observations from geosynchronous orbit as a proxy for ion cyclotron wave growth during storm times
[1] There is still much to be understood about the processes contributing to relativistic electron enhancements and losses in the radiation belts. Wave particle interactions with both whistler and electromagnetic ion cyclotron (EMIC) waves may precipitate or accelerate these electrons. This study examines the relation between EMIC waves and resulting relativistic electron flux levels after geomagnetic storms. A proxy for enhanced EMIC waves is developed using Los Alamos National Laboratory Magnetospheric Plasma Analyzer plasma data from geosynchronous orbit in conjunction with linear theory. In a statistical study using superposed epoch analysis, it is found that for storms resulting in net relativistic electron losses, there is a greater occurrence of enhanced EMIC waves. This is consistent with the hypothesis that EMIC waves are a primary mechanism for the scattering of relativistic electrons and thus cause losses of such particles from the magnetosphere
High-Temperature Dynamics of Spin Glasses
We develop a systematic expansion method of physical quantities for the SK
model and the finite-dimensional model of spin glasses in
non-equilibrium states. The dynamical probability distribution function is
derived from the master equation using a high temperature expansion. We
calculate the expectation values of physical quantities from the dynamical
probability distribution function. The theoretical curves show satisfactory
agreement with Monte Carlo simulation results in the appropriate temperature
and time regions. A comparison is made with the results of a dynamics theory by
Coolen, Laughton and Sherrington.Comment: 24 pages, figures available on request, LaTeX, uses jpsj.sty, to be
published in J. Phys. Soc. Jpn. 66 No. 7 (1997
Techniques to improve technological and sanitary quality
Agronomical ways for better quality and safety
Choice of cultivar is an efficient way to obtain higher grain quality. Intercropping legumes (grain or forage) improves weed competition and N availability for wheat crop or succeeding crop. Green manure can be an effective alternative to farmyard manure. Fertilization with readily available nitrogen improves yield and quality when water is available. Reduced tillage affects soil fertility and wheat yield but has little effects on grain quality.
Technological ways for better quality and safety
Milling process strongly influences flour characteristics. Stone milling improves nutritive value; characteristics remain very stable independent of the milling yield. Flour characteristics from roller milling appear very susceptible to the milling yield. Increasing the milling yield in the aim of enriching nutritional quality has a detrimental effect either on safety (DON) or on bread-making quality (bread volume)
Representation of the Geosynchronous Plasma Environment in Spacecraft Charging Calculations
Historically, our ability to predict and postdict spacecraft surface charging has been limited by the characterization of the plasma environment. One difficulty lies in the common practice of fitting the plasma data to a Maxwellian or Double Maxwellian distribution function, which may not represent the data well for charging purposes. We use electron and ion flux spectra measured by the Los Alamos National Laboratory (LANL) Magnetospheric Plasma Analyzer (MPA) to examine how the use of different spectral representations of the charged particle environment in computations of spacecraft potentials during magnetospheric substorms affects the accuracy of the results. We calculate the spacecraft potential using both the measured fluxes and several different fits to these fluxes. These measured fluxes have been corrected for the difference between the measured and calculated potential. The potential computed using the measured fluxes and the best available material properties of graphite carbon, with a secondary electron escape fraction of 81%, is within a factor of three of the measured potential for 87% of the data. Potentials calculated using a Kappa function fit to the incident electron flux distribution function and a Maxwellian function fit to the incident ion flux distribution function agree with measured potentials nearly as well as do potentials calculated using the measured fluxes. Alternative spectral representations gave less accurate estimates of potential. The use of all the components of the net flux, along with spacecraft specific average material properties, gives a better estimate of the spacecraft potential than the high energy flux alone
Agronomical techniques to improve technological and sanitary quality
In spite of variable grain protein contents, baking quality of organic wheat was found to be acceptable to good. Mycotoxin (DON) infestation was generally low on tested grain samples. Choice of wheat cultivar was the most efficient way to obtain higher grain quality. Fertilization with readily available nitrogen and, to a lower extent, association with legumes and green manures with mixtures containing fodder legumes also improved grain quality. Reduced tillage affected soil quality and wheat yield but had little effects on grain quality
Ex ante Life Cycle Assessment and Environmental Cost-Benefit Analysis of an anaerobic digester in Italy
The end-use valorization of food waste (FW) and biowaste is currently being focused on biofuels and bioproducts production through different technologies. This study evaluated the implementation of a new eco-industrial system in Italy that incorporates a micro-scale anaerobic digestion (mAD) and a Solid-State Fermentation (SSF) unit to produce renewable energy (e.g., electricity and heat) from AD biogas and high-quality bio-based products (e.g., bio-pesticides) from digestate. Three scenarios (S0, S1, S2) were modeled. S0 and S1 included only a solid-liquid separation of digestate through a centrifuge, assuming a different fate for the solid fraction (composting in S0 and application on farmland in S1). S2 integrated SSF and reverse osmosis technologies for the treatment and valorization of digestate with nutrient recovery. The Life Cycle Assessment (LCA) and Environmental Cost-Benefit Analysis (eCBA) methodologies were applied to assess the environmental performances and economic feasibility of the project. The pilot system showed solid environmental performances, especially for S1 and S2, in the five impact categories considered. According to LCA results, the eCBA gives a positive outcome for S2. While the financial and economic analysis showed positive Net Present Values for S2, the project's profitability was not achieved for S0 and S1. If AD plants are implemented at a smaller scale they would represent a favorable investment for the local community; particularly when considering the benefits of nutrient recovery through a complete post-treatment of digestate. The valorization of organic residues could be better supported through introducing alternative market-based policy tools, as well as removing regulatory barriers and encouraging the implementation of financial schemes to support small-scale renewable production systems and the enhancement of market-based instruments for credits certification from renewable energy production. © 2022 The Author(s)
Technological quality of organic wheat in Europe
The demand for high quality organic bread wheat is increasing. The quality level of organic wheat harvested in EU is mainly dependant on variety, environmental conditions and agronomic practices. In some countries, protein content and composition, influencing technological value, are equivalent to those produced under conventional practices. Beside agronomical techniques, technological processes can help to maintain a good quality. Pre-treatments before milling such as debranning were found to be efficient in reducing DON contamination. The project highlighted the necessity to redefine the methods to assess the quality of organic wheat
- …