The efficacy and safety of duloxetine in a multidrug regimen for chronic prostatitis/chronic pelvic pain syndrome.

OBJECTIVE To evaluate the efficacy and safety of duloxetine hydrochloride in the treatment of patients affected by chronic prostatitis/chronic pelvic pain syndrome (CP/CPPS). METHODS Thirty-eight CP/CPPS patients completed the National Institutes of Health Chronic Prostatitis Symptom Index (NIH-CPSI) and International Index of Erectile Function-Erectile Function-5 (IIEF-5) questionnaires, uroflowmetry, and evaluation of psychologic status using Hamilton Anxiety Scale (HAM-A) and Hamilton Depression Scale (HAM-D). Patients were randomly assigned to 2 treatments groups. Treatment in group 1 consisted of a simultaneous oral administration of tamsulosin (0.4 mg/d, 60 mg/d), saw palmetto (320 mg/d), and duloxetine (60 mg/d). Treatment in group 2 consisted of tamsulosin (0.4 mg/d) and saw palmetto (320 mg/d). NIH-CPSI and IIEF-5 questionnaires, uroflowmetry, and evaluation of the psychological status were repeated at 16 weeks of follow-up. RESULTS At 16 weeks, a significant improvement in NIH-CPSI pain subscore, NIH-CPSI quality of life subscore, and NIH-CPSI total score were observed in group 1 patients compared with those in group 2 (P <.01, respectively), together with a significant improvement in HAM-A and HAM-D scores (P <.01, respectively). Patients in group 2 showed a significant improvement in NIH-CPSI total score, in the urinary symptoms subscore, and in the HAM-A total score. No significant differences were observed in IIEF-5 scores in the 2 groups. Maximum flow rate significantly increased in both groups. In group 1, 20% of patients stopped the study due to adverse effects. CONCLUSION The use of duloxetine in a multimodal treatment with an alpha-blocker medication and a saw palmetto extract allowed better results in controlling clinical symptoms, psychologic status and quality of life patients affected by CP/CPPS

Skeletal myocyte types and vascularity in the Black Sicilian Pig.

The objective of this study was to verify the presence of giant fibres in the Black Sicilian pig skeletal muscle and to evaluate the effect of sex on histochemical and morphometric characteristics of the myocytes (myofibres) as well as vascularity of the muscle. Twenty Black Sicilian pigs (10 males, 10 females) from a farm in Sicily (Italy) were slaughtered at two years of age. Muscle tissues were obtained from three muscles: psoas major, longissimus dorsi, and trapezius. Myofibres were stained for myosin ATPase, succinic dehydrogenase, and α-amylase-PAS. For all fibre types, area and perimeter were measured. Slow-twitch oxidative fibres, fast-twitch glycolytic fibres and fast-twitch oxidative-glycolytic fibres were histochemically differentiated; an image-analyzing system was used. The results showed no differences between males and females in percentage of the fibre types, but there were significant differences between sexes in size of all the three fibre types. Psoas major muscle had a high percentage of slow-twitch oxidative fibres and contained more capillaries per fibre and per mm2 than trapezius and longissimus dorsi, in which fast-twitch glycolytic fibres dominated. The cross-sectional area of all fibres types was larger in longissimus dorsi than in trapezius and psoas major muscles; the giant fibres were absent in all the muscles studied. Fibre type composition may contribute to the variation of meat quality

Evolution of the mass-loss rate during atmospheric and pressurized slow pyrolysis of wheat straw in a bench-scale reactor

In the present study, the effects of the absolute pressure (0.1 or 0.5 MPa) and the reactor atmosphere (pure N2 or a mixture of CO2/N2) on the pyrolysis behavior of wheat straw pellets (at 500 °C) were investigated. The most interesting aspect of this work was the use of a weighing platform (with a maximum capacity of 100 kg and a resolution of 0.5 g) to monitor the real-time mass-loss data for the biomass sample (with an initial mass of 400 g). It was observed that an increased pressure considerably affects the mass-loss profiles during the pyrolysis process, leading to higher devolatilization rates in a shorter period of time. Regardless of the pyrolysis atmosphere, an increase in the absolute pressure led to higher yields of gas at the expense of produced water and condensable organic compounds. This finding could be due to the fact that an increased pressure favors the exothermic secondary reactions of the intermediate volatile organic compounds in both liquid and vapor phases. The switch from pure N2 to a mixture of CO2 and N2 at 0.1 MPa also led to a remarkable increase in the yield of produced gas at the expense of the total liquid. This could be mainly due to the promotion of the thermal cracking of the volatile organic compounds at a high partial pressure of CO2, which is also consistent with the measured higher yields of CH4 and CO. The increased yield of CO can also be seen as a direct result of the enhanced reverse Boudouard reaction, which can also explain the much higher specific surface area (and ultra-micropore volume) measured for the biochar produced under the same operating conditions (0.1 MPa and a mixture CO2/N2 as pyrolysis medium)

Evolution of the Mass Loss Rate During Atmospheric and Pressurized Slow Pyrolysis of Wheat Straw in a Bench-Scale Reactor

A deep study focused on the significant effect of the absolute pressure on the yield of produced gas during the slow pyrolysis of biomass was carried out. In addition, the evolution of the mass loss rate linked to the pyrolysis process was also analyzed

Pelvic floor muscle behavior during Valsalva leak point pressure measurement in males and females affected by stress urinary incontinence.

PURPOSE: We evaluated pelvic floor muscle (PFM) behavior during Valsalva leak point pressure (VLPP) measurement in males and females affected by stress urinary incontinence and investigated whether VLPP results are influenced by PFM contraction. MATERIALS AND METHODS: A total of 25 females and 14 males underwent surface electromyographic (EMG) recording of PFM activity while performing VLPP. We investigated 2 conditions, VLPP during spontaneous strain (test A), and with simultaneous relaxation of the pelvic floor (test B). We analyzed average EMG activity (microV) at rest and during VLPP in tests A and B, the increasing EMG activity during tests A and B (the difference between average EMG activity during tests A and B and at rest), and the mean duration (seconds) of EMG activity during tests A and B. RESULTS: We detected a significant increase in EMG activity during tests A and B as compared to activity at rest (p <0.0001). Increasing EMG activity during test B was significantly reduced in females (p <0.05) but not in males. During test A patients reporting urinary incontinence showed a significantly lower EMG activity than that of continent patients (p <0.05). A significant reduction in maximum abdominal pressure was detected in test B compared to test A, but there was no difference in VLPP values between tests A and B. CONCLUSIONS: PFM activity significantly increases during VLPP measurement. Eliminating muscular contraction of the pelvic floor does not significantly alter VLPP results

Test-Retest Reliability and Minimum Detectable Change for Various Frontal Plane Projection Angles during Dynamic Tasks

Objective: Establish between-day test-retest reliability metrics for 2-dimensional frontal plane projection angles (FPPAs) during the lateral step-down (LSD), single-limb squat (SLS), single-limb landing (SLL), and drop vertical jump (DVJ). Design: Test-retest reliability study Setting: University laboratory Participants: 20 healthy adults (12 female, age = 23.60±1.93 years old, body mass index = 24.26±2.54 kg/m2) were tested on 2 separate occasions 7-14 days apart. Main Outcome Measures: Intraclass correlation coefficients (ICC), standard errors of the measurement (SEM), and minimal detectable change (MDC) values across the LSD, SLS, SLL, and DVJ for the following body region variables: trunk, trunk on pelvis, pelvis, hip, thigh to vertical, knee, and shank to vertical. Results: There was moderate-to-substantial between-day test-retest reliability for nearly all body regions across all tasks (ICC = 0.65-0.96). SEM values varied across body regions and tasks (0.9-3.5 degrees). MDCs were variable (2.3-9.8 degrees). Of the body regions, MDCs were largest for the knee and hip. By task, MDCs were lowest for the LSD. Conclusions: This study identified between-day test-retest reliability metrics for 2-dimensional FPPAs across a variety of body regions during commonly assessed clinical tasks. These data allow clinicians and researchers to more confidently assess true change between assessments or over time

Intravesical oxybutynin: mode of action assessed by passive diffusion and electromotive administration with pharmacokinetics of oxybutynin and N-desethyl oxybutynin.

PURPOSE: A proportion of patients with detrusor hyperreflexia who are unresponsive to oral oxybutynin often benefit from intravesical oxybutynin instillation. To our knowledge the precise mode of action of this method is obscure. MATERIALS AND METHODS: In 12 patients with detrusor hyperreflexia who were previously unresponsive to oral and intravesical passive diffusion of 5 mg. oxybutynin we administered 5 mg. oxybutynin orally as well as increased doses of 15 mg. oxybutynin intravesically with passive diffusion and with 15 mA. associated electric current. Each administration mode per patient was associated with an 8-hour urodynamic monitoring session during which oxybutynin and N-desethyl oxybutynin plasma levels, and intravesical oxybutynin uptake were measured. RESULTS: A dose of 5 mg. oxybutynin orally induced no urodynamic improvement with an area under the plasma concentration time curve of combined N-desethyl oxybutynin plus oxybutynin of 16,297 ng./8 hours and an area under the curve ratio of N-desethyl oxybutynin-to-oxybutynin of 11:1. Passive diffusion oxybutynin resulted in 12 mg. oxybutynin intravesical uptake and significant improvement in 3 of 8 urodynamic measurements, although the area under the curve of combined N-desethyl oxybutynin plus oxybutynin was only 2,123 ng./8 hours and the N-desethyl oxybutynin-to-oxybutynin ratio was 1.1:1.0. Electromotive administration of oxybutynin resulted in almost complete intravesical uptake of the 15 mg. dose, significant improvement in all 8 urodynamic measurements and an increased oxybutynin level versus oral and passive diffusion, although the area under the curve of combined N-desethyl oxybutynin plus oxybutynin was 4,574 ng./8 hours and the N-desethyl oxybutynin-to-oxybutynin ratio was inverted at 1.0:1.4. The oral dose of 5 mg. oxybutynin caused anticholinergic side effects in 8 of the 12 patients. Neither intravesical passive diffusion nor electromotive administration caused side effects with an uptake of 12 and 15 mg., respectively. CONCLUSIONS: A large proportion of intravesical oxybutynin is sequestered, probably in the urothelium. Intravesical oxybutynin administration confers therapeutic benefits via localized direct action within the bladder wall. Comment in Intravesical treatment of bladder dysfunction. [J Urol. 2001

Biomass-derived activated carbon as catalyst in the leaching of metals from a copper sulfide concentrate

Chalcopyrite is the resource with the highest amount of Cu content representing around 70–80% of the known reserves in the world. However, chalcopyrite like other copper sulfides, is usually found in deposits with grades around 0.4–0.5% copper. The exploitation of these reserves using traditional flotation methods followed by pyrometallurgical treatment of copper concentrate is at the limit of economic viability. Hydrometallurgical route would be more suitable for treating of these low-graded sulfide ores. However, chalcopyrite is refractory in ferric/sulfuric acid media and shows slow dissolution rates. For this a number of researches were carried out to accelerate the kinetics of leaching by adding pyrite, iron powder, nanosized silica, coal and activated carbon. The main objective of the present work was to study the use of one biomass-derived activated carbon as catalysts in the leaching of copper from chalcopyrite. Sulfuric acid solution of pH 1 with 5 g L-1 of Fe3+ was used as leaching agent. Experiments were performed at 90 °C and 250 rpm, during 48 and 96 h. Concentration of Cu, Zn, As, Sb and Co in the liquid phase was determined in order to evaluate their extraction degree, whereas solid residues were characterized by SEM-EDS and XRD. The presence of biomass-derived activated carbon significantly increased the extraction of copper, decreasing the leaching of arsenic. Furthermore, the use of biomass-derived activated carbon led to lower amounts of crystalline sulfur in the final residue