1,786 research outputs found
Large-volume metrology instrument selection and measurability analysis
A wide range of metrology processes are involved in the manufacture of large products. In addition to the traditional tool-setting and product-verification operations, increasingly flexible metrology-enabled automation is also being used. Faced with many possible measurement problems and a very large number of metrology instruments employing diverse technologies, the selection of the appropriate instrument for a given task can be highly complex. Also, as metrology has become a key manufacturing process, it should be considered in the early stages of design, and there is currently very little research to support this. This paper provides an overview of the important selection criteria for typical measurement processes and presents some novel selection strategies. Metrics that can be used to assess measurability are also discussed. A prototype instrument selection and measurability analysis application is also presented, with discussion of how this can be used as the basis for development of a more sophisticated measurement planning tool. © 2010 Authors
Observation of a mesoscopic magnetic modulation in chiral Mn1/3NbS2
We have investigated the structural, magnetic, thermodynamic, and charge
transport properties of Mn1/3NbS2 single crystals through x-ray and neutron
diffraction, magnetization, specific heat, magnetoresistance, and Hall effect
measurements. Mn1/3NbS2 displays a magnetic transition at TC ~ 45 K with highly
anisotropic behavior expected for a hexagonal structured material. Below TC,
neutron diffraction reveals increased scattering near the structural Bragg
peaks having a wider Q-dependence along the c-axis than the nuclear Bragg
peaks. This indicates helimagnetism with a long pitch length of ~250 nm (or a
wavevector q~0.0025 {\AA}-1) along the c-axis. This q is substantially smaller
than that found for the helimagnetic state in isostructural Cr1/3NbS2 (0.015
{\AA}-1). Specific heat capacity measurements confirm a second-order magnetic
phase transition with a substantial magnetic contribution that persists to low
temperature. The large low-temperature specific heat capacity is consistent
with a large density of low-lying magnetic excitations that are likely
associated with topologically interesting magnetic modes. Changes to the
magnetoresistance, the magnetization, and the magnetic neutron diffraction,
which become more apparent below 20 K, imply a modification in the character of
the magnetic ordering corresponding to the magnetic contribution to the
specific heat capacity. These observations signify a more complex magnetic
structure both at zero and finite fields for Mn1/3NbS2 than for the
well-investigated Cr1/3NbS2.Comment: 22 pages, 7 figure
Farm Level Comparison of H.R. 2646 and S. 1731
The provisions in the House (H.R. 2646) and Senate (S. 1731) farm bills are analyzed with respect to their impacts on 94 representative crop, livestock, and dairy farms. The analysis incorporates both historical price and production risk for the farms so the âsafety netâ aspects of the bills can be compared. Representative crop livestock and dairy farms for major production regions across the county are analyzed. Information to describe and simulate these farms comes from a panel of farmers in each local area. The farm panels are reconvened frequently to update their farmâs data. The representative farm data base has been used for policy analysis for more than 15 years. The simulation model used for the analysis was developed by AFPC scientists.Agribusiness, Agricultural and Food Policy,
A Randomized, Double-Blinded, Phase II Trial of Gemcitabine and Nab-Paclitaxel Plus Apatorsen or Placebo in Patients with Metastatic Pancreatic Cancer: The RAINIER Trial.
Lessons learnedThe addition of the heat shock protein 27 (Hsp27)-targeting antisense oligonucleotide, apatorsen, to a standard first-line chemotherapy regimen did not result in improved survival in unselected patients with metastatic pancreatic cancer.Findings from this trial hint at the possible prognostic and predictive value of serum Hsp27 that may warrant further investigation.BackgroundThis randomized, double-blinded, phase II trial evaluated the efficacy of gemcitabine/nab-paclitaxel plus either apatorsen, an antisense oligonucleotide targeting heat shock protein 27 (Hsp27) mRNA, or placebo in patients with metastatic pancreatic cancer.MethodsPatients were randomized 1:1 to Arm A (gemcitabine/nab-paclitaxel plus apatorsen) or Arm B (gemcitabine/nab-paclitaxel plus placebo). Treatment was administered in 28-day cycles, with restaging every 2 cycles, until progression or intolerable toxicity. Serum Hsp27 levels were analyzed at baseline and on treatment. The primary endpoint was overall survival (OS).ResultsOne hundred thirty-two patients were enrolled, 66 per arm. Cytopenias and fatigue were the most frequent grade 3/4 treatment-related adverse events for both arms. Median progression-free survival (PFS) and OS were 2.7 and 5.3 months, respectively, for arm A, and 3.8 and 6.9 months, respectively, for arm B. Objective response rate was 18% for both arms. Patients with high serum level of Hsp27 represented a poor-prognosis subgroup who may have derived modest benefit from addition of apatorsen.ConclusionAddition of apatorsen to chemotherapy does not improve outcomes in unselected patients with metastatic pancreatic cancer in the first-line setting, although a trend toward prolonged PFS and OS in patients with high baseline serum Hsp27 suggests this therapy may warrant further evaluation in this subgroup
The Distribution, Excitation and Formation of Cometary Molecules: Methanol, Methyl Cyanide and Ethylene Glycol
We present an interferometric and single dish study of small organic species
toward Comets C/1995 O1 (Hale-Bopp) and C/2002 T7 (LINEAR) using the BIMA
interferometer at 3 mm and the ARO 12m telescope at 2 mm. For Comet Hale-Bopp,
both the single-dish and interferometer observations of CH3OH indicate an
excitation temperature of 105+/-5 K and an average production rate ratio
Q(CH3OH)/Q(H2O)~1.3% at ~1 AU. Additionally, the aperture synthesis
observations of CH3OH suggest a distribution well described by a spherical
outflow and no evidence of significant extended emission. Single-dish
observations of CH3CN in Comet Hale-Bopp indicate an excitation temperature of
200+/-10 K and a production rate ratio of Q(CH3CN)/Q(H2O)~0.017% at ~1 AU. The
non-detection of a previously claimed transition of cometary (CH2OH)2 toward
Comet Hale-Bopp with the 12m telescope indicates a compact distribution of
emission, D<9'' (<8500 km). For the single-dish observations of Comet T7
LINEAR, we find an excitation temperature of CH3OH of 35+/-5 K and a CH3OH
production rate ratio of Q(CH3OH)/Q(H2O)~1.5% at ~0.3 AU. Our data support
current chemical models that CH3OH, CH3CN and (CH2OH)2 are parent nuclear
species distributed into the coma via direct sublimation off cometary ices from
the nucleus with no evidence of significant production in the outer coma.Comment: accepted for publication in Ap
The Japanese model in retrospective : industrial strategies, corporate Japan and the 'hollowing out' of Japanese industry
This article provides a retrospective look at the Japanese model of industrial development. This model combined an institutional approach to production based around the Japanese Firm (Aoki's, J-mode) and strategic state intervention in industry by the Japanese Ministry of International Trade and Industry (MITI). For a long period, the alignment of state and corporate interests appeared to match the wider public interest as the Japanese economy prospered. However, since the early 1990s, the global ambitions of the corporate sector have contributed to a significant 'hollowing out' of Japan's industrial base. As the world today looks for a new direction in economic management, we suggest the Japanese model provides policy-makers with a salutary lesson in tying the wider public interest with those of the corporate sector
Knowledge-Based Collaborative Lean Manufacturing Management (KBCLMM) system
The objective of this research paper is to demonstrate the application of hybrid Knowledge-Based System, Gauging Absences of Pre-Requisites (GAP), and Analytic Hierarchy Process (AHP) approaches for selecting the improvement programs for Collaborative Lean Manufacturing Management (CLMM) System.In this research, a generic Knowledge-Based System is developed to measure the level of CLMM adoption in automotive manufacturers compared to the ideal system. Using the embedded GAP and AHP technique, the key lean manufacturing improvement programs can be prioritised by using both qualitative and quantitative criteria.The analysis covers the planning stage of the KBCLMM. The utilisation of the approach is demonstrated with an illustrative example
State-of-the-art in lean design engineering:a literature review on white collar lean
Lean is usually associated with the âoperationsâ of a manufacturing enterprise; however, there is a growing awareness that these principles may be transferred readily to other functions and sectors. The application to knowledge-based activities such as engineering design is of particular relevance to UK plc. Hence, the purpose of this study has been to establish the state-of-the-art, in terms of the adoption of Lean in new product development, by carrying out a systematic review of the literature. The authors' findings confirm the view that Lean can be applied beneficially away from the factory; that an understanding and definition of value is key to success; that a set-based (or Toyota methodology) approach to design is favoured together with the strong leadership of a chief engineer; and that the successful implementation requires organization-wide changes to systems, practices, and behaviour. On this basis it is felt that this review paper provides a useful platform for further research in this topic
- âŠ