Trends in Research, Productivity Growth and Competitiveness in Agriculture in New Zealand and Australia

Investment in R&D has long been regarded as an important source of productivity growth in New Zealand and Australian agriculture. Perhaps because research lags are long, current investment in R&D is monitored closely. In this paper trends in public investment in R&D and in productivity growth are reviewed. Investment in R&D has been flat in both countries although in recent years investment in New Zealand has increased. Nevertheless research intensity in Australia has been significantly higher than that in New Zealand. Productivity growth is also likely to have been higher. Econometric evidence about the sources of productivity growth is rarely clear. We develop some scenarios about the importance of domestic and foreign R&D and other sources of productivity growth and find that returns to investments in domestic research in both countries are likely to have been in the order of 15-20 percent.Productivity, research and development, research evaluation, Productivity Analysis, Research and Development/Tech Change/Emerging Technologies,

Parametric imaging in the evaluation of non-steroidal anti-inflammatory drugs

The major difficulty in clinical assessment of patients with inflammatory disease, and in the evaluation of consequent anti-inflammatory drug treatment has hitherto been the impossibility of quantifying the inflammatory process. Clinical methods have proved too rough and ready, with unacceptable levels of error even with so-called objective measurements, while laboratory investigation by scintigraphy has been of only limited value since it has previously evolved around static imaging. [Continues.

Continuous powder feeding for pharmaceutical solid dosage form manufacture: a short review

There has been a noticeable shift from pharmaceutical batch processing towards a more continuous mode of manufacture for solid oral dosage forms. Continuous solid oral dose processes would not be possible in the absence of a highly accurate feeding system. The performance of feeders defines the content of formulations and is therefore a critical operation in continuous manufacturing of solid dosage forms. It was the purpose of this review to review the role of the initial powder feeding step in a continuous manufacturing process. Different feeding mechanisms are discussed with a particular emphasis on screw controlled loss in weight (LIW) feeding. The importance of understanding the physical properties of the raw materials and its impact on the feeding process is reviewed. Prior knowledge of materials provides an initial indication of how the powders will behave through processing and facilitates in the selection of the most suitable (i) feeder (capacity), (ii) feeding mechanism, and (iii) in the case of screw feeder - screw type. The studies identified in this review focus on the impact of material on powder feeding performance

From ESP to CLIL using the Schema Theory

This paper explains the use of the Schema Theory in planning and preparing a Physiology lesson in a CLIL tertiary context in a Spanish university. The adopted combination of methods used in applying the theory is transferable to any context and subject. Scaffolding for content and language learning was undertaken using schema-building through activities involving: (1) sequencing; (2) using an exercise with causality language for purposeful reading (3) outlining; and (4) commentating on a video. Since CLIL practices have often lead CLIL theory, the study is organized into two parts. The first part is described in this article, and the second part, involving feedback from the students in this study, is work in progress. The required Physiology lesson lent itself to outlining a reading, and applying top-down structuring of information and schema building, as well as to the use of causality. The video commentary activity, on the other hand, catered for a more bottom-up approach. The paper focuses on the design of materials and activities as part of the ongoing CLIL collaboration between the language and the content professors. Other than the Schema theory and top-down bottom-up information processing, the designed activities were based on the principles of social constructivism through language scaffolding and peer collaboration.

Adaptive paternal effects? Experimental evidence that the paternal environment affects offspring performance

The ability of females to adaptively influence offspring phenotype via maternal effects is widely acknowledged, but corresponding nongenetic paternal effects remain unexplored. Males can adjust sperm phenotype in response to local conditions, but the transgenerational consequences of this plasticity are unknown. We manipulated paternal density of a broadcast spawner (Styela plicata, a solitary ascidean) using methods shown previously to alter sperm phenotype in the field, then conducted in vitro fertilizations that excluded maternal effects and estimated offspring performance under natural conditions. Offspring sired by males from low-density experimental populations developed faster and had a higher hatching success than offspring sired by males living in high densities. In the field, offspring survived relatively better when their environment matched their father's, raising the possibility that fathers can adaptively influence the phenotype of their offspring according to local conditions. As the only difference between offspring is whether they were artificially fertilized by sperm from males kept in high- vs. low-density cages, we can unequivocally attribute any differences in offspring performance to an environmentally induced paternal effect. Males of many species manipulate the phenotype of their sperm in response to sperm competition: our results show this plasticity can influence offspring fitness, potentially in adaptive ways, raising the possibility that adaptive nongenetic paternal effects may be more common than previously thought

Refractive femtosecond laser beam shaping for two-photon polymerization

Three dimensional microstructure fabrication by two-photon polymerization is an established technique that normally uses single beam serial writing. Recently the use of a micro-optical element, to give multipoint beam delivery, was reported to give a degree of parallel processing. The authors describe an alternative approach to parallel processing using an axicon lens. This is a refractive element that, in combination with a high power microscope objective, efficiently transforms the laser beam from a Gaussian spot to an annulus. The authors demonstrate that the beam can polymerize a three dimensional shape, with nanoscale resolution. The use of more sophisticated refractive beam shaping is also discussed. (c) 2007 American Institute of Physics. (DOI:10.1063/1.2713787

The knowledge, attitudes and beliefs of patients and their healthcare professionals around oral dosage form modification: a systematic review of the qualitative literature

Objectives: The objective of this systematic review was to synthesize the available qualitative evidence on the knowledge, attitudes and beliefs of adult patients, healthcare professionals and carers about oral dosage form modification. Design: A systematic review and synthesis of qualitative studies was undertaken, utilising the thematic synthesis approach. Data sources: The following databases were searched from inception to September 2015: PubMed, Medline (EBSCO), EMBASE, CINAHL, PsycINFO, Web of Science, ProQuest Databases, Scopus, Turning Research Into Practice (TRIP), Cochrane Central Register of Controlled Trials (CENTRAL) and the Cochrane Database of Systematic Reviews (CDSR). Citation tracking and searching the references lists of included studies was also undertaken. Grey literature was searched using the OpenGrey database, internet searching and personal knowledge. An updated search was undertaken in June 2016. Review methods: Studies meeting the following criteria were eligible for inclusion; (i) used qualitative data collection and analysis methods; (ii) full-text was available in English; (iii) included adult patients who require oral dosage forms to be modified to meet their needs or; (iv) carers or healthcare professionals of patients who require oral dosage forms to be modified. Two reviewers independently appraised the quality of the included studies using the Critical Appraisal Skills Programme Checklist. A thematic synthesis was conducted and analytical themes were generated. Results: Of 5455 records screened, seven studies were eligible for inclusion; three involved healthcare professionals and the remaining four studies involved patients. Four analytical themes emerged from the thematic synthesis: (i) patient-centred individuality and variability; (ii) communication; (iii) knowledge and uncertainty and; (iv) complexity. The variability of individual patient’s requirements, poor communication practices and lack of knowledge about oral dosage form modification, when combined with the complex and multi-faceted healthcare environment complicate decision making regarding oral dosage form modification and administration. Conclusions: This systematic review has highlighted the key factors influencing the knowledge, attitudes and beliefs of patients and healthcare professionals about oral dosage form modifications. The findings suggest that in order to optimise oral medicine modification practices the needs of individual patients should be routinely and systematically assessed and decision-making should be supported by evidence based recommendations with multidisciplinary input. Further research is needed to optimise oral dosage form modification practices and the factors identified in this review should be considered in the development of future interventions

Oral medicine modification for older adults: a qualitative study of nurses

Objective: Oral medicines are frequently modified (eg, tablets crushed) for older adults. However, these modifications can have clinical, legal and/or ethical implications. Nurses bear responsibility for medicine administration and hence, perform these modifications. The aim of this study was to investigate the knowledge, attitudes and beliefs of nurses about oral medicine modification for older adults. Design: A qualitative study was conducted using semi-structured, face-to-face interviews with nurses providing care to older adults in acute and long-term care settings. Interviews were audio-recorded, transcribed verbatim and analysed thematically. Settings: Sixteen purposively selected care settings; 4 acute-care and 12 long-term care settings were included. Nurses were recruited by convenience sampling at these sites. Participants: Eighteen nurses participated (83% female, 67% long-term care, 33% acute-care, median age (IQR) 38 years (32.5–52.0)). Results: Three major themes: modifying—a necessary evil, nurses’ role as patient advocate and modifying—we are working very much as a team and two minor themes: fractional dosing, and covert administration emerged from the data. Nurses viewed oral medicine modifications as being a routine and necessary occurrence in geriatric patient care due to limitations of available formulations and the presence of age-related challenges in drug administration. Nurses’ knowledge of residents’ requirements ensured that they advocate for those with individualised formulation needs, however, nurses rely on pharmacists for information about modifications. Nurses expressed a desire for supports including increased education and ward-specific, pharmacist-developed recommendations on common modifications. Conclusions: This study has provided useful insights into the views of nurses regarding oral medicine modification for older adults. The unique and varied formulation requirements of older adults must be acknowledged. Increased engagement by healthcare professionals, the pharmaceutical industry, regulatory agencies and policy-makers is required to facilitate the development of age-appropriate formulations. In the interim, practical interventions, informed by the findings of this study, are required

Cost-effectiveness of initial stress cardiovascular MR, stress SPECT or stress echocardiography as a gate-keeper test, compared with upfront invasive coronary angiography in the investigation and management of patients with stable chest pain: Mid-term outcomes from the CECaT randomised controlled trial

Objectives: To compare outcomes and cost-effectiveness of various initial imaging strategies in the management of stable chest pain in a long-term prospective randomised trial. Setting: Regional cardiothoracic referral centre in the east of England. Participants: 898 patients (69% man) entered the study with 869 alive at 2 years of follow-up. Patients were included if they presented for assessment of stable chest pain with a positive exercise test and no prior history of ischaemic heart disease. Exclusion criteria were recent infarction, unstable symptoms or any contraindication to stress MRI. Primary outcome measures: The primary outcomes of this follow-up study were survival up to a minimum of 2 years post-treatment, quality-adjusted survival and cost-utility of each strategy. Results: 898 patients were randomised. Compared with angiography, mortality was marginally higher in the groups randomised to cardiac MR (HR 2.6, 95% CI 1.1 to 6.2), but similar in the single photon emission CT-methoxyisobutylisonitrile (SPECT-MIBI; HR 1.0, 95% CI 0.4 to 2.9) and ECHO groups (HR 1.6, 95% CI 0.6 to 4.0). Although SPECT-MIBI was marginally superior to other non-invasive tests there were no other significant differences between the groups in mortality, quality-adjusted survival or costs. Conclusions: Non-invasive cardiac imaging can be used safely as the initial diagnostic test to diagnose coronary artery disease without adverse effects on patient outcomes or increased costs, relative to angiography. These results should be interpreted in the context of recent advances in imaging technology. Trial registration: ISRCTN 47108462, UKCRN 3696