Quantifying the impact of evapotranspiration at the aquifer scale via groundwater modelling and MODIS Data

none4noIn shallow alluvial aquifers characterized by coarse sediments, the evapotranspiration rates from groundwater are often not accounted for due to their low capillarity. Nevertheless, this assumption can lead to errors in the hydrogeological balance estimation. To quantify such impacts, a numerical flow model using MODFLOW was set up for the Tronto river alluvial aquifer (Italy). Different estimates of evapotranspiration rates were retrieved from the online Moderate Resolution Imaging Spectroradiometer (MODIS) database and used as input values. The numerical model was calibrated against piezometric heads collected in two snapshots (mid-January 2007 and mid-June 2007) in monitoring wells distributed along the whole alluvial aquifer. The model performance was excellent, with all the statistical parameters indicating very good agreement between calculated and observed heads. The model validation was performed using baseflow data of the Tronto river compared with the calculated aquifer-river exchanges in both of the simulated periods. Then, a series of numerical scenarios indicated that, although the model performance did not vary appreciably regardless of whether it included evapotranspiration from groundwater, the aquifer-river exchanges were influenced significantly. This study showed that evapotranspiration from shallow groundwater accounts for up to 21% of the hydrogeological balance at the aquifer scale and that baseflow observations are pivotal in quantifying the evapotranspiration impact.openColombani N.; Gaiolini M.; Busico G.; Postacchini M.Colombani, N.; Gaiolini, M.; Busico, G.; Postacchini, M

Modeling soil nitrate accumulation and leaching in conventional and conservation agriculture cropping systems

Nitrate is a major groundwater inorganic contaminant that is mainly due to fertilizer leaching. Compost amendment can increase soils' organic substances and thus promote denitrification in intensively cultivated soils. In this study, two agricultural plots located in the Padana plain (Ferrara, Italy) were monitored and modeled for a period of 2.7 years. One plot was initially amended with 30 t/ha of compost, not tilled, and amended with standard fertilization practices, while the other one was run with standard fertilization and tillage practices. Monitoring was performed continuously via soil water probes (matric potential) and discontinuously via auger core profiles (major nitrogen species) before and after each cropping season. A HYDRUS-1D numerical model was calibrated and validated versus observed matric potential and nitrate, ammonium, and bromide (used as tracers). Model performance was judged satisfactory and the results provided insights on water and nitrogen balances for the two different agricultural practices tested here. While water balance and retention time in the vadose zone were similar in the two plots, nitrate leaching was less pronounced in the plot amended with compost due to a higher denitrification rate. This study provides clear evidence that compost addition and no-tillage (conservation agriculture) can diminish nitrate leaching to groundwater, with respect to standard agricultural practices

Assessment of the intrinsic vulnerability of agricultural land to water and nitrogen losses: case studies in Italy and Greece

Abstract. LOS indices (abbr. of Losses) can be used for the assessment of the intrinsic vulnerability of agricultural land to water and nitrogen losses through percolation and runoff. The indices were applied on the lowland region of Ferrara Province (FP) in Italy and the upland region of Sarigkiol Basin (SB) in Greece. The most vulnerable zones in FP were the coastal areas consisting of high permeability sandy dunes and the areas close to riverbanks and palaeochannels, and in SB were the areas characterized by high slopes and high permeability soils at high altitude and areas belonging to the upper part of the alluvial plain close to the boundaries between agricultural land and mountainous regions. The application of LOS indices highlighted the specific features of both lowland and upland regions that contribute to water and nitrogen losses and showed their ability for use as tools in designing environmental management plans

Monitoring and modelling interactions between the montagna dei fiori aquifer and the castellano stream (Central Apennines, Italy)

Groundwater is the most used water resource around the world, but due to population growth and climate change the alluvial lowland aquifers are often polluted and over-exploited. Thus, more and more frequently water managers need to shift their attention to mountain regions to identify groundwater resources for drinking purposes. This study presents a monitoring and modelling approach that allowed to quantify the inflow from the "Montagna dei Fiori" fractured aquifer to the Castellano stream. Continuous monitoring of flow discharge and temperature during an entire hydrological year (2018-2019) at two monitoring stations along the stream allowed to discriminate between the baseflow (on average, 0.891 m3/s) and the run-off (on average, 0.148 m3/s) components. A hydrogeological basin-wide numerical flow model (using MODFLOW-2005) was set up using information from hydrogeological and geomechanical surveys. The model was calibrated using the daily baseflow observations made in the Castellano stream (R2 = 0.75). The calibrated model allowed to quantify groundwater/surface water interactions. After an automated sensitivity analysis (using MODFLOW-2000), the recharge was found to be the most uncertain parameter, followed by the hydraulic conductivity zonation. This methodology could be applied in other mountain regions where groundwater monitoring networks are usually lacking to improve water resources management

Actual and forecasted vulnerability assessment to seawater intrusion via galdit-susi in the volturno river mouth (Italy)

Coastal areas have become increasingly vulnerable to groundwater salinization, especially in the last century, due to the combined effects of climate change and growing anthropization. In this study, a novel methodology named GALDIT-SUSI was applied in the floodplain of the Volturno River mouth for the current (2018) and future (2050) evaluation of seawater intrusion accounting for the expected subsidence and groundwater salinization rates. Several input variables such as digital surface model, land use classification, subsidence rate and drainage system have been mapped via remote sensing resources. The current assessment highlights how areas affected by salinization coincide with the semiperennial lagoons and inland depressed areas where paleosaline groundwaters are present. The future assessment (2050) shows a marked increase of salinization vulnerability in the coastal strip and in the most depressed areas. The results highlight that the main vulnerability driver is the Revelle index, while predicted subsidence and recharge rates will only slightly affect groundwater salinization. This case study indicates that GALDIT-SUSI is a reliable and easy-to-use tool for the assessment of groundwater salinization in many coastal regions of the world

DISTRIBUTIONS ISOTOPIQUES DES PRODUITS DE TRANSFERTS TRÈS INÉLASTIQUES ENTRE IONS LOURDS

On compare les distributions isotopiques expérimentales des produits de transfert très inélastiques obtenus par les réactions 40Ca (284 MeV) + 40Ca et 40Ar (295 MeV) + 232Th

Metodologías para el desarrollo de software en PYMES

Uno de los principales objetivos de este proyecto de investigación en el cual está inmerso el presente trabajo, es especificar modelos y guías de certificación para productos de Software Libre y procesos de ciclo de vida que involucren plataformas open source. Para alcanzar los objetivos propuestos se abordaron los diferentes modelos de proceso de software, desarrollando sus características, bondades y deficiencias, con el fin de detectar qué metodología se encuadra o adapta mejor al escenario de las Pequeñas y Medianas Empresas productoras de software o empresas que en su estructura albergan un equipo de desarrollo no demasiado numeroso. Se realizará un relevamiento en PYMES en la Región de Salto Grande, que tengan grupos de trabajos dedicados al proceso de ciclo de vida de software.Eje: Ingeniería de SoftwareRed de Universidades con Carreras en Informática (RedUNCI

Self-assembly in solution of a reversible comb-shaped supramolecular polymer

We report a single step synthesis of a polyisobutene with a bis-urea moiety in the middle of the chain. In low polarity solvents, this polymer self-assembles by hydrogen bonding to form a combshaped polymer with a central hydrogen bonded backbone and polyisobutene arms. The comb backbone can be reversibly broken, and consequently, its length can be tuned by changing the solvent, the concentration or the temperature. Moreover, we have proved that the bulkiness of the side-chains have a strong influence on both the self-assembly pattern and the length of the backbone. Finally, the density of arms can be reduced, by simply mixing with a low molar mass bis-urea

Metodologías para el desarrollo de software en PYMES

Uno de los principales objetivos de este proyecto de investigación en el cual está inmerso el presente trabajo, es especificar modelos y guías de certificación para productos de Software Libre y procesos de ciclo de vida que involucren plataformas open source. Para alcanzar los objetivos propuestos se abordaron los diferentes modelos de proceso de software, desarrollando sus características, bondades y deficiencias, con el fin de detectar qué metodología se encuadra o adapta mejor al escenario de las Pequeñas y Medianas Empresas productoras de software o empresas que en su estructura albergan un equipo de desarrollo no demasiado numeroso. Se realizará un relevamiento en PYMES en la Región de Salto Grande, que tengan grupos de trabajos dedicados al proceso de ciclo de vida de software.Eje: Ingeniería de SoftwareRed de Universidades con Carreras en Informática (RedUNCI