Fabrication and deposition of copper and copper oxide nanoparticles by laser ablation in open air

The proximity of the “post-antibiotic era”, where infections and minor injuries could be a cause of death, there are urges to seek an alternative for the cure of infectious diseases. Copper nanoparticles and their huge potential as a bactericidal agent could be a solution. In this work, Cu and Cu oxide nanoparticles were synthesized by laser ablation in open air and in argon atmosphere using 532 and 1064 nm radiation generated by nanosecond and picosecond Nd:YVO4 lasers, respectively, to be directly deposited onto Ti substrates. Size, morphology, composition and the crystalline structure of the produced nanoparticles have been studied by the means of field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), the energy dispersive spectroscopy of X-rays (EDS), selected area electron diffraction (SAED) and X-ray diffraction (XRD). The UV-VIS absorbance of the thin layer of nanoparticles was also measured, and the antibacterial capacity of the obtained deposits tested against Staphylococcus aureus. The obtained deposits consisted of porous coatings composed of copper and copper oxide nanoparticles interconnected to form chain-like aggregates. The use of the argon atmosphere contributed to reduce significantly the formation of Cu oxide species. The synthesized and deposited nanoparticles exhibited an inhibitory effect upon S. aureus.Peer ReviewedPostprint (published version

Palladium nanoparticles synthesized by laser ablation in liquids for antimicrobial applications

Antibiotic resistance is a leading cause of death worldwide. In this paper, we explore new alternatives in the treatment of infections. Noble metal nanoparticles could help to mitigate this problem. In this work, palladium nanoparticles were synthesized by laser ablation in order to explore their antimicrobial capacity. To obtain palladium nanoparticles, a palladium plate immersed in water, or methanol, was ablated, using two pulsed lasers that emit radiation with wavelengths of 532 nm and 1064 nm, respectively. Pure Pd-NPs with crystalline microstructure and rounded shape were obtained. The nanoparticles’ size is more homogeneous if the laser wavelength is 532 nm, and it decreases when methanol is used as solvent, reaching mean diameters smaller than 6 nm. With the objective of studying antimicrobial activity against Staphylococcus aureus, the Pd-NPs were immobilized on the surface of titanium discs. The release of palladium ions was recorded during the first seven days, and the cytotoxicity of the immobilized NPs was also tested with L929 mouse fibroblast cell line. Palladium nanoparticles synthesized by means of the infrared laser in methanol showed a strong inhibitory effect on S. aureus and good cytocompatibility, with no toxic effect on fibroblast cells.Peer ReviewedPostprint (published version

Production of nanoparticles from natural hydroxylapatite by laser ablation

Laser ablation of solids in liquids technique has been used to obtain colloidal nanoparticles from biological hydroxylapatite using pulsed as well as a continuous wave (CW) laser. Transmission electron microscopy (TEM) measurements revealed the formation of spherical particles with size distribution ranging from few nanometers to hundred nanometers and irregular submicronic particles. High resolution TEM showed that particles obtained by the use of pulsed laser were crystalline, while those obtained by the use of CW laser were amorphous. The shape and size of particles are consistent with the explosive ejection as formation mechanism

Development of marine-based nanocomposite scaffolds for biomedical applications

Despite the increasing attention that marine organisms are receiving, many of those are not efficiently exploited and subproducts with valuable compounds are being discarded. Two examples of those subproducts are the endoskeleton of squid, from which β-­‐chitin and consecutively chitosan can be obtained; and fish-­‐bones, as a source for the production of nano-­‐ hydroxyapatite. In this work, inspired in the nanocomposite structure of human bone, marine-­‐ based nanocomposite scaffolds composed by chitosan and nano-­‐hydroxyapatite (nHA) were developed using particle aggregation methodology. Chitosan was obtained from endoskeleton of giant squid Dosidicus Gigas while fish hydroxyapatite nanoparticles were synthesized from fish-­‐bones by pulsed laser in deionized water. An innovative methodology was used based on the agglomeration of prefabricated microspheres of chitosan/nHA, generally based on the random packing of microspheres with further aggregation by physical or thermal means to create a marine nanocomposite (CHA) .The morphological analysis of the developed nanocomposites revealed a low porosity structure, but with high interconnectivity, for all produced scaffolds. Furthermore, the nanocomposite scaffolds were characterized in terms of their mechanical properties, bioactivity, crystallinity and biological behavior. The obtained results highlight that the chitosan/nHA-­‐based marine nanocomposite can be a good candidate for biomedical applications, namely on bone regeneration

Semiconductor gellan gum based composite hydrogels for tissue engineering applications

Publicado em "Journal of Tissue Engineering and Regenerative Medicine", vol. 7, supp. 1 (2013)Semiconductor hydrogels can be developed by combining the intrinsic electrical properties of semiconductors with the specific characteristics of hydrogels. These hydrogels have recently attracted much attention for applications in tissue engineering, especially formulations incorporating pyrrole and excellent biocompatibility. Several studies have reported that electrical stimulation influences the migration, proliferation and differentiation of stem cells and other cell lines [1]. The goal of this work is to use in situ chemical polymerization of polypyrrole (PPy) with gellan gum (GG) in order to obtain a new generation of semiconductor composite hydrogels. For the synthesis of GG/PPy composites, GG at 1.25% (w/v) final concentration was prepared in distilled water at room temperature. The solution was then heated under stirring at 90°C for 20 min. Temperature was decreased to 65°C and Py was added under vigorous agitation. The crosslinker solution (CaCl2, 0.18%) was added at 50°C. After 2 h, GG/Py composite hydrogels were obtained. In a further step, GG/Py samples were immersed in a solution of oxidizing agent in PBS and the reaction was carried out for 18 h under agitation at room temperature. Finally, the samples were frozen at -80°C for 48 h and lyophilized. The characterization of GG, GG/PPy and PPy samples was performed by scanning electron microscopy (SEM). The incorporation of PPy in the gellan gum was confirmed by SEM analysis. The coating with PPy increases the thickness of each sheet in 3 fold when compared with GG samples. Conductivity tests were also performed. For cytotoxicity assay, the samples were rehydrated with complete culture medium. MTS and DNA quantification assays were performed to evaluate the metabolic activity and proliferation of L929 fibroblast cells after 1, 3 and 7 days in culture with GG, GG/PPy and PPy samples. MTS assays clearly indicate a proportional relation between the cell viability and the PPy concentration: higher concentrations of PPy resulted in lower cell viability. These results show that lower concentration of PPy incorporated in the GG hydrogels can provide an adequate electrical stimulus to improve cell behavior. In conclusion, semiconductor hydrogels can be an excellent platform for tissue engineering and electrochemical therapy application

Re-irradiation of silver nanoparticles obtained by laser ablation in water and assessment of their antibacterial effect

The rapid evolution of resistant bacteria is a huge problem in medicine because makes the treatment of infections more and more difficult. The bactericidal properties of noble metal nanoparticles could be a solution. In this work silver nanoparticles were produced by using two nanosecond Nd:YVO4 lasers operating at 1064 and 532 nm respectively to ablate a silver target submerged in pure de-ionized water. Part of the resulting colloidal solution was injected as a fine stream by a compressed air system and re-irradiated one and three times with the same laser to resize and get uniform nanoparticles. The obtained nanoparticles by ablation and re-irradiation consisted of crystalline Ag nanoparticles with a bimodal size distribution. The particle size has been reduced by subsequent laser re-irradiation with both laser sources, reaching a 40% of mean size reduction. Inhibitory effects on the proliferation of Staphylococcus aureus was demonstrated on silver nanoparticles obtained after re-irradiation with the infrared laser.Postprint (author's final draft

Increased UV absorption properties of natural hydroxyapatite-based sunscreen through laser ablation modification in liquid

Sunfilters based on hydroxyapatite (HAp) and iron‐containing compounds (Fe2O3 and calcium iron phosphates) are of increasing interest, as they show UV absorption without generating health endanger free radicals (usually observed when other inorganic sunscreens are used). In this paper, laser ablation of solids in liquids has been applied to improve the UV absorption properties of a HAp based Fe‐containing sunscreen powder derived from cod fish bones. Two different laser wavelengths were explored (532 and 1064 nm, green and infrared, respectively); an improved experimental device was used, to allow a fine control of the volume of the irradiated particles. Results show an increased UV absorbance for the laser‐treated powders in comparison with the untreated ones; this can be explained considering the smaller particle size and increased surface area; the higher iron concentration in the powders may also be determinant. Enhanced absorption was also observed in the near‐infrared range, making the powders even more suitable for sunscreen applications. The green laser was more effective than the infrared one. Overall, laser ablation showed to be a powerful technique to control the size of the sunscreen particles and tailor their optical properties.info:eu-repo/semantics/acceptedVersio

Synthesis and deposition of silver nanoparticles on cp Ti by laser ablation in open air for antibacterial effect in dental implants

Silver nanoparticles have been synthetized and deposited on cp Ti substrates in one-step process by the use of laser ablation in open air. The nanoparticles are produced by ablating Ag foil using two different lasers and an inert gas jet oriented into the interaction zone to prevent oxidation and to direct the ablated material to the substrate. The HRTEM images and FFT confirmed the crystalline nature of the obtained silver nanoparticles with the presence of oxidized ones, while FE-SEM revealed that the nanoparticles were uniformly distributed on Ti substrates. The Ag-containing Ti substrates showed good antibacterial activity against Lactobacillus salivarius.Peer ReviewedPostprint (author's final draft