Sagittal Subtalar and Talocrural Joint Assessment During Ambulation With Controlled Ankle Movement (CAM) Boots

Background: The purpose of the current study was to determine sagittal plane talocrural and subtalar kinematic differences between barefoot and controlled ankle movement (CAM) boot walking. This study used fluoroscopic images to determine talar motion relative to tibia and calcaneal motion relative to talus. Methods: Fourteen male subjects (mean age 24.1 ± 3.5 years) screened for normal gait were tested. A fluoroscopy unit was used to collect images at 200 Hz during stance. Sagittal motion of the talocrural and subtalar joints were analyzed barefoot and within short and tall CAM boots. Results: Barefoot talocrural mean maximum plantar and dorsiflexion were 9.2 ± 5.4 degrees and −7.5 ± 7.4 degrees, respectively; short CAM boot mean maximum plantar and dorsiflexion were 3.2 ± 4.0 degrees and −4.8 ± 10.2 degrees, respectively; and tall CAM boot mean maximum plantar and dorsiflexion were −0.2 ± 3.5 degrees and −2.4 ± 5.1 degrees, respectively. Talocrural mean range of motion (ROM) decreased from barefoot (16.7 ± 5.1 degrees) to short CAM boot (8.0 ± 4.9 degrees) to tall CAM boot (2.2 ± 2.5 degrees). Subtalar mean maximum plantarflexion angles were 5.3 ± 5.6 degrees for barefoot walking, 4.1 ± 5.9 degrees for short CAM boot walking, and 3.0 ± 4.7 degrees for tall CAM boot walking. Mean minimum subtalar plantarflexion angles were 0.7 ± 3.2 degrees for barefoot walking, 0.7 ± 2.9 degrees for short CAM boot walking, and 0.1 ± 4.8 degrees for tall CAM boot walking. Subtalar mean ROM decreased from barefoot (4.6 ± 3.9 degrees) to short CAM boot (3.4 ± 3.8 degrees) to tall CAM boot (2.9 ± 2.6 degrees). Conclusion: Tall and short CAM boot intervention was shown to limit both talocrural and subtalar motion in the sagittal plane during ambulation. The greatest reductions were seen with the tall CAM boot, which limited talocrural motion by 86.8% and subtalar motion by 37.0% compared to barefoot. Short CAM boot intervention reduced talocrural motion by 52.1% and subtalar motion by 26.1% compared to barefoot. Clinical Relevance: Both short and tall CAM boots reduced talocrural and subtalar motion during gait. The short CAM boot was more convenient to use, whereas the tall CAM boot more effectively reduced motion. In treatments requiring greater immobilization of the talocrural and subtalar joints, the tall CAM boot should be considered

Magnetic flux jumps in textured Bi2Sr2CaCu2O(8+d)

Magnetic flux jumps in textured Bi2Sr2CaCu2O(8+d) have been studied by means of magnetization measurements in the temperature range between 1.95 K and Tc, in an external magnetic field up to 9 T. Flux jumps were found in the temperature range 1.95 K - 6 K, with the external magnetic field parallel to the c axis of the investigated sample. The effect of sample history on magnetic flux jumping was studied and it was found to be well accounted for by the available theoretical models. The magnetic field sweep rate strongly influences the flux jumping and this effect was interpreted in terms of the influence of both flux creep and the thermal environment of the sample. Strong flux creep was found in the temperature and magnetic field range where flux jumps occur suggesting a relationship between the two. The heat exchange conditions between the sample and the experimental environment also influence the flux jumping behavior. Both these effects stabilize the sample against flux instabilities, and this stabilizing effect increases with decreasing magnetic field sweep rate. Demagnetizing effects are also shown to have a significant influence on flux jumping.Comment: 10 pages, 6 figures, RevTeX4, submitted to Phys. Rev.

Experimental study of ceramic coated tip seals for turbojet engines

Ceramic gas-path seals were fabricated and successfully operated over 1000 cycles from flight idle to maximum power in a small turboshaft engine. The seals were fabricated by plasma spraying zirconia over a NiCoCrAlX bond boat on the Haynes 25 substrate. Coolant-side substrate temperatures and related engine parameters were recorded. Post-test inspection revealed mudflat surface cracking with penetration to the ceramic bond-coat interface

High speed electric motors based on high performance novel soft magnets

Novel Co-based soft magnetic materials are presented as a potential substitute for electrical steels in high speed motors for current industry applications. The low losses, high permeabilities, and good mechanical strength of these materials enable application in high rotational speed induction machines. Here, we present a finite element analysis of Parallel Path Magnetic Technology rotating motors constructed with both silicon steel and Co-based nanocomposite. The later achieved a 70% size reduction and an 83% reduction on NdFeB magnet volume with respect to a similar Si-steel design.Fil: Silveyra, Josefina María. Universidad de Buenos Aires. Facultad de Ingenieria. Departamento de Fisica. Laboratorio de Sólidos Amorfos; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Tecnologías y Ciencias de la Ingeniería; Argentina; ArgentinaFil: Leary, A. M.. University Of Carnegie Mellon; Estados UnidosFil: DeGeorge, V.. University Of Carnegie Mellon; Estados UnidosFil: Simizu, S.. Advanced Materials Corporation; Estados UnidosFil: McHenry, M. E.. University Of Carnegie Mellon; Estados Unido

Reconstitution of a Minimal DNA Replicase From Pseudomonas Aeruginosa and Stimulation by Non-Cognate Auxiliary Factors

DNA polymerase III holoenzyme is responsible for chromosomal replication in bacteria. The components and functions of Escherichia coli DNA polymerase III holoenzyme have been studied extensively. Here, we report the reconstitution of replicase activity by essential components of DNA polymerase holoenzyme from the pathogen Pseudomonas aeruginosa. We have expressed and purified the processivity factor (β), single-stranded DNA-binding protein, a complex containing the polymerase (α) and exonuclease (ϵ) subunits, and the essential components of the DnaX complex (τ3δδ′). Efficient primer elongation requires the presence of αϵ, β, and τ3δδ′. Pseudomonas aeruginosa αϵ can substitute completely for E. coli polymerase III in E. coli holoenzyme reconstitution assays. Pseudomonas β and τ3δδ′ exhibit a 10-fold lower activity relative to their E. coli counterparts in E. coli holoenzyme reconstitution assays. Although the Pseudomonas counterpart to the E. coli ψ subunit was not apparent in sequence similarity searches, addition of purified E. coli χ and ψ (components of the DnaX complex) increases the apparent specific activity of the Pseudomonas τ3δδ′ complex ∼10-fold and enables the reconstituted enzyme to function better under physiological salt conditions

NMR characterization of spin-1/2 alternating antiferromagnetic chains in the high-pressure phase of (VO)2P2O7

Local-susceptibility measurements via the NMR shifts of $^{31}$P and $^{51}$V nuclei in the high-pressure phase of (VO)$_{2}$P$_{2}$O$_{7}$ confirmed the existence of a unique alternating antiferromagnetic chain with a zero-field spin gap of 34 K. The $^{31}$P nuclear spin-lattice relaxation rate scales with the uniform spin susceptibility below about 15 K which shows that the temperature dependence of both the static and dynamical spin susceptibilities becomes identical at temperatures not far below the spin-gap energy.Comment: 6 pages, 5 figures; To be published in J. Phys. Condens. Matte

Microwave Properties of Ba(0.6)K(0.4)BiO(3) Crystals

We report on field-induced variations of the microwave surface resistance at 9.6 GHz of Ba(0.6)K(0.4)BiO(3) crystals. Energy losses have been investigated as a function of the static magnetic field in the range of temperatures 4.2 K - Tc. By analyzing the experimental results in the framework of the Coffey and Clem model we determine the temperature dependence of the first-penetration field, upper critical field and depinning frequency. The results show that the pinning energy of this bismuthate superconductor is weaker than those of cuprates.Comment: 6 pages, 8 embedded figure

Absence of Edge Localized Moments in the Doped Spin-Peierls System CuGe1−x_{1-x}Six_{x}O3_3

We report the observation of nuclear quadrupole resonance (NQR) of Cu from the sites near the doping center in the spin-Peierls system CuGe$_{1-x}$Si$_{x}$O$_3$. The signal appears as the satellites in the Cu NQR spectrum, and has a suppressed nuclear spin-lattice relaxation rate indicative of a singlet correlation rather than an enhanced magnetic correlation near the doping center. Signal loss of Cu nuclei with no neighboring Si is also observed. We conclude from these observations that the doping-induced moments are not in the vicinity of the doping center but rather away from it.Comment: 4 pages, 4 figures, accepted for publication in Phys. Rev. Let

Spin Dynamics near the Superconductor-to-Insulator Transition in Impurity-Doped YBa2Cu4O8

We studied low-frequency spin dynamics near the impurity-induced superconductor-to-insulator transition for underdoped high-Tc superconductor YBa2(Cu1-xMx)4O8 (M=Ni, Zn) using the Cu nuclear quadrupole resonance (NQR) spin-echo technique. We observed remarkable suppression of the normal-state pseudo spin-gap and a loss of Cu NQR spectrum intensity at low temperatures around the critical impurity concentration.Comment: 6 pages, 4 figures. To be published in J. Phys. Soc. Jpn. Vol.70, No.7 (2001