Evaluation of Neural Network for Automated Classification of Plant Component on Histological Section

Classification of plant component on image histological sections is critical for determining non-compliance type of undeclared additiveand further action for technologist, or other responsible person. However, this task is often challenging due to the absence of professional histologists or non-compliance with the conditions of microstructural analysisand also the subjective criteria for evaluation. In this study, we propose a machine learning model that automatically classifies the plant component on images histological sections. Our model uses a convolutional neural network to identify regions of plant components, then aggregates those classifications to infer predominant and minor plant components on histological sections image. We evaluated our model on an independent set of 95 images histological sections. It achieved a kappa score of 0,525 and an agreement of 66,6% with three histologists for classifying the predominant plant component, slightly higher than the inter-histologists kappa score of 0,485

Methods for nonparametric statistics in scientific research. Overview. Part 2

The use of nonparametric methods in scientific research provides a number of advantages. The most important of these advantages are versatility and a wide range of such methods. There are no strong assumptions associated with nonparametric tests, which means that there is little chance of assumptions being violated, i. e. the result is reliable and valid. Nonparametric tests are widely used because they may be applied to experiments for which it is not possible to obtain quantitative indicators (descriptive studies) and to small samples. The second part of the article describes nonparametric goodness-of-fit tests, i. e. Pearson’s test, Kolmogorov test, as well as tests for homogeneity, i. e. chi-squared test and Kolmogorov-Smirnov test. Chi-squared test is based on a comparison between the empirical (experimental) frequencies of the indicator under study and the theoretical frequencies of the normal distribution. Kolmogorov-Smirnov test is based on the same principle as Pearson’s chi-squared test, but involves comparing the accumulated frequencies of the experimental and theoretical distributions. Pearson’s chi-squared test and Kolmogorov test may also be used to compare two empirical distributions for the significance of differences between them. Kolmogorov test based on the accumulation of empirical frequencies is more sensitive to differences and captures those subtle nuances that are not available in Pearson’s chi-squared test. Typical errors in the application of these tests are analyzed. Examples are given, and step-by-step application of each test is described. With nonparametric methods, researcher receives a working tool for statistical analysis of the results.The use of nonparametric methods in scientific research provides a number of advantages. The most important of these advantages are versatility and a wide range of such methods. There are no strong assumptions associated with nonparametric tests, which means that there is little chance of assumptions being violated, i. e. the result is reliable and valid. Nonparametric tests are widely used because they may be applied to experiments for which it is not possible to obtain quantitative indicators (descriptive studies) and to small samples. The second part of the article describes nonparametric goodness-of-fit tests, i. e. Pearson’s test, Kolmogorov test, as well as tests for homogeneity, i. e. chi-squared test and Kolmogorov-Smirnov test. Chi-squared test is based on a comparison between the empirical (experimental) frequencies of the indicator under study and the theoretical frequencies of the normal distribution. Kolmogorov-Smirnov test is based on the same principle as Pearson’s chi-squared test, but involves comparing the accumulated frequencies of the experimental and theoretical distributions. Pearson’s chi-squared test and Kolmogorov test may also be used to compare two empirical distributions for the significance of differences between them. Kolmogorov test based on the accumulation of empirical frequencies is more sensitive to differences and captures those subtle nuances that are not available in Pearson’s chi-squared test. Typical errors in the application of these tests are analyzed. Examples are given, and step-by-step application of each test is described. With nonparametric methods, researcher receives a working tool for statistical analysis of the results

Balance of protein supplements according to the criterion of convertible protein

The main sources of vegetable protein are seeds of legumes and oilseeds, which differ as by total content as by the quality. One of the least expensive and most rapid method of assessing the quality of protein is a chemical method, based on a comparative analysis of its amino acid composition, in particular, essential amino acids (EAA), and "ideal" protein. A widespread indicator of the proximity of the protein to the ideal is the minimum period, which shows how much of it can be used by the body for plastic needs (the main exchange and ensuring of body weight gain). Obviously, the more of this (convertible) protein in the product, the better (but not more than the daily value). One of the methods of obtaining a grain product with an increased convertible protein is blending, i.e. mixing in a certain proportion of different types of protein raw materials. In this case, the content of the converted mixture may be greater than in the components, and the excess less. The article presents a methodology for calculating the proportion of convertible protein in the product, as well as a new approach to the formation of effective mixtures. On the basis of this method, the results of the calculation of such mixtures on the example of a grain product with the use of collapsed white lupine, linseed cake and ginger seeds as components are shown. In all cases, there are rational proportions of the mixture, in which its convertible protein exceeds this figure in the component. The accuracy of the calculations largely depends on the accuracy of the total protein content and EAA.The main sources of vegetable protein are seeds of legumes and oilseeds, which differ as by total content as by the quality. One of the least expensive and most rapid method of assessing the quality of protein is a chemical method, based on a comparative analysis of its amino acid composition, in particular, essential amino acids (EAA), and "ideal" protein. A widespread indicator of the proximity of the protein to the ideal is the minimum period, which shows how much of it can be used by the body for plastic needs (the main exchange and ensuring of body weight gain). Obviously, the more of this (convertible) protein in the product, the better (but not more than the daily value). One of the methods of obtaining a grain product with an increased convertible protein is blending, i.e. mixing in a certain proportion of different types of protein raw materials. In this case, the content of the converted mixture may be greater than in the components, and the excess less. The article presents a methodology for calculating the proportion of convertible protein in the product, as well as a new approach to the formation of effective mixtures. On the basis of this method, the results of the calculation of such mixtures on the example of a grain product with the use of collapsed white lupine, linseed cake and ginger seeds as components are shown. In all cases, there are rational proportions of the mixture, in which its convertible protein exceeds this figure in the component. The accuracy of the calculations largely depends on the accuracy of the total protein content and EAA

Methods for nonparametric statistics in scientific research. Overview. Part 1.

Daily, researcher faces the need to compare two or more observation groups obtained under different conditions in order to confirm or argue against a scientific hypothesis. At this stage, it is necessary to choose the right method for statistical analysis. If the statistical prerequisites are not met, it is advisable to choose nonparametric analysis. Statistical analysis consists of two stages: estimating model parameters and testing statistical hypotheses. After that, the interpretation of the mathematical processing results in the context of the research object is mandatory. The article provides an overview of two groups of nonparametric tests: 1) to identify differences in indicator distribution; 2) to assess shift reliability in the values of the studied indicator. The first group includes: 1) Rosenbaum Q-test, which is used to assess the differences by the level of any quantified indicator between two unrelated samplings; 2) Mann-Whitney U-test, which is required to test the statistical homogeneity hypothesis of two unrelated samplings, i. e. to assess the differences by the level of any quantified indicator between two samplings. The second group includes sign G-test and Wilcoxon T-test intended to determine the shift reliability of the related samplings, for example, when measuring the indicator in the same group of subjects before and after some exposure. Examples are given; step-by-step application of each test is described. The first part of the article describes simple nonparametric methods. The second part describes nonparametric tests for testing hypotheses of distribution type (Pearson’s chi-squared test, Kolmogorov test) and nonparametric tests for testing hypotheses of sampling homogeneity (Pearson’s chi-squared test for testing sampling homogeneity, Kolmogorov-Smirnov test)

Wireless pressure sensor system for fish quality monitoring

Food quality monitoring is increasingly important. This paper aims to propose the developed wireless pressure sensor system (WPSS) for fish quality monitoring. WPSS consists of a sensor acquisition module, power supply module, and Bluetooth module. The sensor acquisition module includes a temperature sensor, pressure sensor, and microcontroller unit (MCU). When Bluetooth receives the data collection command from the smartphone, the data of storage temperature and pressure in the food package can be collected by the sensor and transmitted wirelessly to the smartphone through Bluetooth. All data obtained by the system is monitored, stored, processed, and eventually displayed in a smartphone app in real-time to improve temperature, air pressure, and freshness transparency within the food package, ultimately ensuring food quality and safety. The proposed WPSS has potential application in many kinds of food monitoring. It can realize simple and intuitive food quality indications

Nonparametric statistics. Part 3. Correlation coefficients

A measure of correlation or strength of association between random variables is the correlation coefficient. In scientific research, correlation analysis is most often carried out using various correlation coefficients without explaining why this particular coefficient was chosen and what the resulting value of this coefficient means. The article discusses Spearman correlation coefficient, Kendall correlation coefficient, phi (Yule) correlation coefficient, Cramér’s correlation coefficient, Matthews correlation coefficient, Fechner correlation coefficient, Tschuprow correlation coefficient, rank-biserial correlation coefficient, point-biserial correlation coefficient, as well as association coefficient and contingency coefficient. The criteria for applying each of the coefficients are given. It is shown how to establish the significance (insignificance) of the resulting correlation coefficient. The scales in which the correlated variables should be located for the coefficients under consideration are presented. Spearman rank correlation coefficient and other nonparametric indicators are independent of the distribution law, and that is why they are very useful. They make it possible to measure the contingency between such attributes that cannot be directly measured, but can be expressed by points or other conventional units that allow ranking the sample. The benefit of rank correlation coefficient also lies in the fact that it allows to quickly assess the relationship between attributes regardless of the distribution law. Examples are given and step-by-step application of each coefficient is described. When analyzing scientific research and evaluating the results obtained, the strength of association is most commonly assessed by the correlation coefficient. In this regard, a number of scales are given (Chaddock scale, Cohen scale, Rosenthal scale, Hinkle scale, Evans scale) grading the strength of association for correlation coefficient, both widely recognized and not so well known

About the distributed model of composite conveyor

The problem of energy consumption of composite conveyors is considered. A distributed model of control of production lines is proposed for use. The model of control of composite conveyors in partial derivatives is described. The problem of optimal control of conveyors with leading and driven lines is formulated