Nanometer-Resolved Collective Micromeniscus Oscillations through Optical Diffraction

We study the dynamics of periodic arrays of micrometer-sized liquid-gas menisci formed at superhydrophobic surfaces immersed into water. By measuring the intensity of optical diffraction peaks in real time we are able to resolve nanometer scale oscillations of the menisci with sub-microsecond time resolution. Upon driving the system with an ultrasound field at variable frequency we observe a pronounced resonance at a few hundred kHz, depending on the exact geometry. Modeling the system using the unsteady Stokes equation, we find that this low resonance frequency is caused by a collective mode of the acoustically coupled oscillating menisci.Comment: 4 pages, 5 figure

Recombination Ghosts in Littrow Configuration: Implications for Spectrographs Using Volume Phase Holographic Gratings

We report the discovery of optical ghosts generated when using Volume Phase Holographic (VPH) gratings in spectrographs employing the Littrow configuration. The ghost is caused by light reflected off the detector surface, recollimated by the camera, recombined by, and reflected from, the grating and reimaged by the camera onto the detector. This recombination can occur in two different ways. We observe this ghost in two spectrographs being developed by the University of Wisconsin - Madison: the Robert Stobie Spectrograph for the Southern African Large Telescope and the Bench Spectrograph for the WIYN 3.5m telescope. The typical ratio of the brightness of the ghost relative to the integrated flux of the spectrum is of order 10^-4, implying a recombination efficiency of the VPH gratings of order 10^-3 or higher, consistent with the output of rigorous coupled wave analysis. Any spectrograph employing VPH gratings, including grisms, in Littrow configuration will suffer from this ghost, though the general effect is not intrinsic to VPH gratings themselves and has been observed in systems with conventional gratings in non-Littrow configurations. We explain the geometric configurations that can result in the ghost as well as a more general prescription for predicting its position and brightness on the detector. We make recommendations for mitigating the ghost effects for spectrographs and gratings currently built. We further suggest design modifications for future VPH gratings to eliminate the problem entirely, including tilted fringes and/or prismatic substrates. We discuss the resultant implications on the spectrograph performance metrics.Comment: 13 pages, 8 figures, emulateapj style, accepted for publication in PAS

Scalar limitations of diffractive optical elements

In this paper, scalar limitations of diffractive optic components are investigated using coupled wave analyses. Results are presented for linear phase gratings and fanout devices. In addition, a parametric curve is given which correlates feature size with scalar performance

High reflectivity grating waveguide coatings for 1064nm

We propose thin single-layer grating waveguide structures to be used as high-reflectivity, but low thermal noise, alternative to conventional coatings for gravitational wave detector test mass mirrors. Grating waveguide (GWG) coatings can show a reflectivity of up to 100% with an overall thickness of less than a wavelength. We theoretically investigate GWG coatings for 1064nm based on tantala (Ta2O5) on a Silica substrate focussing on broad spectral response and low thickness

Broadband optical limiter based on nonlinear photoinduced anisotropy in bacteriorhodopsin film

Nonlinear photoinduced anisotropy in a bacteriorhodopsin film was theoretically and experimentally investigated and a broadband active optical limiter was demonstrated in the visible spectral range. A diode-pumped second harmonic yttrium aluminum garnet laser was used as a pumping beam and three different wavelengths at lambda=442, 532, and 655 nm from different lasers were used as probing beams. The pump and probe beams overlap at the sample. When the pumping beam is absent, the probing beam cannot transmit the crossed polarizers. With the presence of the pumping beam, a portion of the probing light is detected owing to the photoinduced anisotropy. Due to the optical nonlinearity, the transmitted probing beam intensity is clamped at a certain value, which depends on the wavelength, when the pumping beam intensity exceeds 5 mW/mm(2). Good agreement between theory and experiment is found

Charge oscillation-induced light transmission through subwavelength slits and holes

We present a concrete picture of spoof surface plasmons (SSPs) combined with cavity resonance to clarify the basic mechanism underlying extraordinary light transmission through metal films with subwavelength slits or holes. This picture may indicate a general mechanism of metallic nanostructure optics: When light is incident on a non-planar conducting surface, the free electrons cannot move homogeneously in response to the incident electric field, i.e., their movement can be impeded at the rough parts, forming inhomogeneous charge distributions. The oscillating charges/dipoles then emit photons (similar to Thomson scattering of x rays by oscillating electrons), and the interference between the photons may give rise to anomalous transmission, reflection or scattering.Comment: 4 pages, 4 figures, are "surface plasmons" true for conducting structures? Answere is here. Also see the new arXiv:0903.3565v1, the expansion of this pape

Extraordinary magnetooptical effects and transmission through the metal-dielectric plasmonic systems

We report on significant enhancement of the magnetooptical effects in gyrotropic systems of a metallic film perforated by subwavelength hole arrays and a uniform dielectric film magnetized perpendicular to its plane. Calculations, based on a rigorous coupled-wave analysis, demonstrate the Faraday and Kerr effect spectra having several resonance peaks in the near infrared range, some of them coinciding with transmittance peaks. Qualitative analysis revealed that magnetic polaritons being coupled magnetic-film waveguiding modes with surface plasmons play a crucial role in the observed effect.Comment: 10 pages, 3 figure

An experimental study to discriminate between the validity of diffraction theories for off-Bragg replay

We show that experiments clearly verify the assumptions made by the first-order two-wave coupling theory for one dimensional lossless unslanted planar volume holographic gratings using the beta-value method rather than Kogelnik's K-vector closure method. Apart from the fact that the diffraction process is elastic, a much more striking difference between the theories becomes apparent particularly in the direction of the diffracted beam in off-Bragg replay. We therefore monitored the direction of the diffracted beam as a function of the off-Bragg replay angle in two distinct cases: [a] the diffracted beam lies in the plane of incidence and [b] the sample surface normal, the grating vector and the incoming beam do not form a plane which calls for the vectorial theory and results in conical scattering.Comment: Corrected Eqs. (3) & (6); 14 pages, 8 figure

Subwavelength Structured Narrow-Band Integrated Optical Grating Filters

A unique type of narrow band integrated optical filter is investigated based on embedding a subwavelength resonant grating structure within a planar waveguide. Current integrated narrow-band optical filters are limited by their size, density of devices that can be produced, overall performance, and ability to be actively altered for tuning and modulation purposes. In contrast, the integrated optical filters described in this work can have extremely narrow bandwidths--on the order of a few angstroms. Also, their compact size enables multiple filters to be integrated in a single high density device for signal routing or wavelength discrimination. Manipulating any of the resonant structure`s parameters will tune the output response of the filter, which can be used for modulation or switching applications

Ultra-broadband Light Absorption by a Sawtooth Anisotropic Metamaterial Slab

We present an ultra broadband thin-film infrared absorber made of saw-toothed anisotropic metamaterial. Absorbtivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half maximum is about 86%. Such property is retained well at a very wide range of incident angles too. Light of shorter wavelengths are harvested at upper parts of the sawteeth of smaller widths, while light of longer wavelengths are trapped at lower parts of larger tooth widths. This phenomenon is explained by the slowlight modes in anisotropic metamaterial waveguide. Our study can be applied in the field of designing photovoltaic devices and thermal emitters.Comment: 12 pages, 4 picture