18,922 research outputs found
Recommended from our members
Further Developments in Process Mapping and Modelling in Direct Metal Selective Laser Melting
This paper advances previous reported work on the mapping and modelling of single
tracks and layers produced in powder beds of tool steel and stainless steel powders by a CO2
laser. For single tracks it reports on predicted and simulated track masses. It validates the
simulations, including the use of absorption close to 1.0 when cylindrical tracks are formed. It
also reports on melt pool temperature calculations and estimated melt pool dimensions which are
used, in conjunction with bed physical properties, to explain why the single tracks form as either
continuous with a crescent shape cross-section, continuous with an elliptical section,
discontinuously irregularly broken, discontinuously balled or only partially melted as scan
speeds and laser powers change. It then extends its scope, experimentally, to consider effects of
scan spacing on single layer formation.Mechanical Engineerin
In situ synthesis of size-controlled, stable silver nanoparticles within ultrashort peptide hydrogels and their anti-bacterial properties
We have developed a silver-releasing biomaterial with promising potential for wound healing applications. The material is made of ultrashort peptides which can self-assemble in water to form hydrogels. Silver nanoparticles (Ag NPs) were synthesized in situ within the biomaterial, using only UV irradiation and no additional chemical reducing agents. The synthetic strategy allows precise control of the nanoparticle size, with the network of peptide fibers preventing aggregation of Ag NPs. The biomaterial shows increased mechanical strength compared to the hydrogel control. We observed a sustained release of Ag NPs over a period of 14 days. This is a crucial prerequisite for effective anti-bacterial therapy. The ability to inhibit bacterial growth was tested using different bacterial strains, namely gram-negative Escherichia coli and Pseudomonas aeruginosa and gram-positive Staphylococcus aureus. Inhibition of bacterial growth was observed for all strains. The best results were obtained for Pseudomonas aeruginosa which is known for exhibiting multidrug resistance. Biocompatibility studies on HDFa cells, using Ag NP-containing hydrogels, did not show any significant influence on cell viability. We propose this silver-releasing hydrogel as an excellent biomaterial with great potential for applications in wound healing due to its low silver content, sustained silver nanoparticle release and biocompatibility
Charge storage effects in Mylar resulting from electron irradiation, June 1965 - June 1966
Charge storage effects in Mylar from electron irradiatio
Rasch-progrediente Glomerulonephritis: Bewährte und neuere Therapieansätze
Zusammenfassung: Die rapid progrediente Glomerulonephritis (RPGN) ist als klinisches Syndrom durch die zeitliche Veränderung der Nierenfunktion definiert. Frühes Erkennen und sofortige immunsuppressive Behandlung verbessern die Prognose. Die Nierenbiopsie und die Autoantikörperserologie ermöglichen die genaue diagnostische Zuordnung der RPGN. Es werden ihre Einteilung aufgrund der Immunhistologie, der antineutrophil zytoplasmatische Antikörper (ANCA) und der antiglomerulären Basalmembran-Antikörper (anti-GBM) diskutiert. Anhand von Ergebnissen randomisiert kontrollierter Studien werden die Möglichkeiten der differenzierten Behandlung erläuter
Maximal multihomogeneity of algebraic hypersurface singularities
From the degree zero part of logarithmic vector fields along an algebraic
hypersurface singularity we indentify the maximal multihomogeneity of a
defining equation in form of a maximal algebraic torus in the embedded
automorphism group. We show that all such maximal tori are conjugate and in
one-to-one correspondence to maxmimal tori in the degree zero jet of the
embedded automorphism group.
The result is motivated by Kyoji Saito's characterization of quasihomogeneity
for isolated hypersurface singularities and extends its formal version and a
result of Hauser and Mueller.Comment: 5 page
The large scale gas and dust distribution in the galaxy: Implications for star formation
Infrared Astronomy Observations are presented for the diffuse infrared (IR) emissions from the galactic plane at wavelengths of 60 and 100 microns and the total far infrared intensity and its longitudinal variations in the disk were derived. Using available CO, 5 GHz radio-continuum, and HI data, the IR luminosity per hydrogen mass and the ingrared excess (IRE) ratio in the Galaxy were derived. The longitudinal profiles of the 60 and 100 micron emission were linearly decomposed into three components that are associated with molecular (H2), neutral (HI), and ionized (HII) phases in the interstellar medium (ISM), and the relevant dust properties were derived in each phase. Implications of the findings for various models of the diffuse IR emisison and for star formation in the galactic disk are discussed
Growth control of GaAs nanowires using pulsed laser deposition with arsenic over pressure
Using pulsed laser ablation with arsenic over pressure, the growth conditions
for GaAs nanowires have been systematically investigated and optimized. Arsenic
over pressure with As molecules was introduced to the system by thermal
decomposition of polycrystalline GaAs to control the stoichiometry and shape of
the nanowires during growth. GaAs nanowires exhibit a variety of geometries
under varying arsenic over pressure, which can be understood by different
growth processes via vapor-liquid-solid mechanism. Single-crystal GaAs
nanowires with uniform diameter, lengths over 20 m, and thin surface oxide
layer were obtained and can potentially be used for further electronic
characterization
Recommended from our members
Rotational 3D Printing of Sensor Devices using Reactive Ink Chemistries
This paper charts progress in three key areas of a project supported by both UK
government and UK industry to manufacture novel sensor devices using rotary 3D printing
technology and innovative ink chemistries; (1) the development of an STL file slicing algorithm
that returns constant Z height 2D contour data at a resolution that matches the given print head
setup, allowing digital images to be generated of the correct size without the need for scaling;
(2) the development of image transformation algorithms which allow images to be printed at
higher resolutions using tilted print heads and; (3) the formulation of multi part reaction inks
which combine and react on the substrate to form solid material layers with a finite thickness. A
Direct Light Projection (DLP) technique demonstrated the robustness of the slice data by
constructing fine detailed three dimensional test pieces which were comparable to identical parts
built in an identical way from slice data obtained using commercial software. Material systems
currently under investigation include plaster, stiff polyamides and epoxy polymers and
conductive metallic’s. Early experimental results show conductivities of silver approaching
1.42x105 Siemens/m.Mechanical Engineerin
Submillimeter wavelength survey of the galactic plane from l = -5 deg to l = +62 deg: Structure and energetics of the inner disk
Results from a large scale survey of the first quadrant of the Milky Way galactic plane at wavelengths of 150, 250, and 300 microns with a 10x10 arcmin beam are presented. The emission detected in the survey arises from compact sources, most of which are identified with known peaks of 5 GHz and/or CO emission, and from an underlying diffuse background with a typical angular width of approximately 0.9 deg (FWHM) which accounts for most of the emission. A total of 80 prominent discrete sources were identified and characterized, of which about half were not previously reported at far infrared wavelengths. The total infrared luminosity within the solar circle is approximately 1 to 2x10 to the 10th power L sub 0, and is probably emitted by dust that resides in molecular clouds
- …