Precipitated iron: a limit on gettering efficacy in multicrystalline silicon

A phosphorus diffusion gettering model is used to examine the efficacy of a standard gettering process on interstitial and precipitated iron in multicrystalline silicon. The model predicts a large concentration of precipitated iron remaining after standard gettering for most as-grown iron distributions. Although changes in the precipitated iron distribution are predicted to be small, the simulated post-processing interstitial iron concentration is predicted to depend strongly on the as-grown distribution of precipitates, indicating that precipitates must be considered as internal sources of contamination during processing. To inform and validate the model, the iron distributions before and after a standard phosphorus diffusion step are studied in samples from the bottom, middle, and top of an intentionally Fe-contaminated laboratory ingot. A census of iron-silicide precipitates taken by synchrotron-based X-ray fluorescence microscopy confirms the presence of a high density of iron-silicide precipitates both before and after phosphorus diffusion. A comparable precipitated iron distribution was measured in a sister wafer after hydrogenation during a firing step. The similar distributions of precipitated iron seen after each step in the solar cell process confirm that the effect of standard gettering on precipitated iron is strongly limited as predicted by simulation. Good agreement between the experimental and simulated data supports the hypothesis that gettering kinetics is governed by not only the total iron concentration but also by the distribution of precipitated iron. Finally, future directions based on the modeling are suggested for the improvement of effective minority carrier lifetime in multicrystalline silicon solar cells

Comparison of ex vivo expansion culture conditions of mesenchymal stem cells for human cell therapy

Mesenchymal stem cells (MSCs) are multipotent stem cells. Based on their properties, several clinical trials have been designed to explore their potential therapeutic effect. Fetal calf serum (FCS, commonly used for in vitro expansion) is an undesirable source of xenogeneic antigens and bears the risk of transmitting contaminations. As an alternative for FCS, platelet lysate (PL) and both autologous and allogeneic human serum have been proposed. The aim of this study is to compare the culture of bone marrow (BM)- derived MSCs in the presence of different serum supplements to determine the effect on cell growth, differentiation potential, and immunologic function

Implementation of a Monte Carlo method to model photon conversion for solar cells.

A physical model describing different photon conversion mechanisms is presented in the context of photovoltaic applications. To solve the resulting system of equations, a Monte Carlo ray-tracing model is implemented, which takes into account the coupling of the photon transport phenomena to the non-linear rate equations describing luminescence. It also separates the generation of rays from the two very different sources of photons involved (the sun and the luminescence centers). The Monte Carlo simulator presented in this paper is proposed as a tool to help in the evaluation of candidate materials for up- and downconversion. Some application examples are presented, exploring the range of values that the most relevant parameters describing the converter should have in order to give significant gain in photocurrent

Mesenchymal stem cells expanded in vitro with human serum for the treatment of acute and chronic graft-versus-host disease: results of a phase I/II clinical trial

This trial evaluated the feasibility and efficacy of the infusion of mesenchymal stem cells expanded using human serum for the treatment of refractory acute or chronic graft-versus-host disease. Twenty-eight expansions were started. In 22, a minimum of more than 1 x 10⁶ mesenchymal stem cells/kg were obtained after a median of 26 days; this threshold was not obtained in the remaining cases. Ten patients received cells for the treatment of refractory or relapsed acute graft-versus-host disease and 8 for chronic disease. One patient treated for acute graft-versus-host disease obtained a complete response, 6 had a partial response and 3 did not respond. One of the chronic patients achieved complete remision, 3 a partial response, and 4 did not respond. The current study supports the use of this approach in less heavily treated patients for both acute and chronic graft-versus-host disease. The trial has been registered at ClinicalTrials.gov: identifier NCT00447460

Intra-articular injection of two different doses of autologous bone marrow mesenchymal stem cells versus hyaluronic acid in the treatment of knee osteoarthritis: long-term follow up of a multicenter randomized controlled clinical trial (phase I/II)

Background: Mesenchymal stromal cells (MSCs) are a promising option to treat knee osteoarthritis (OA). Their safety and usefulness have been reported in several short-term clinical trials but less information is available on the longterm efects of MSC in patients with osteoarthritis. We have evaluated patients included in our previous randomized clinical trial (CMM-ART, NCT02123368) to determine their long-term clinical efect. Materials: A phase I/II multicenter randomized clinical trial with active control was conducted between 2012 and 2014. Thirty patients diagnosed with knee OA were randomly assigned to Control group, intraarticularly administered hyaluronic acid alone, or to two treatment groups, hyaluronic acid together with 10×106 or 100×106 cultured autol‑ ogous bone marrow-derived MSCs (BM-MSCs), and followed up for 12 months. After a follow up of 4 years adverse efects and clinical evolution, assessed using VAS and WOMAC scorings are reported. Results: No adverse efects were reported after BM-MSCs administration or during the follow-up. BM-MSCs-adminis‑ tered patients improved according to VAS, median value (IQR) for Control, Low-dose and High-dose groups changed from 5 (3, 7), 7 (5, 8) and 6 (4, 8) to 7 (6, 7), 2 (2, 5) and 3 (3, 4), respectively at the end of follow up (Low-dose vs Control group, p=0.01; High-dose vs Control group, p=0.004). Patients receiving BM-MSCs also improved clinically accord‑ ing to WOMAC. Control group showed an increase median value of 4 points (−11;10) while Low-dose and Highdose groups exhibited values of −18 (−28;−9) and −10 (−21;−3) points, respectively (Low-dose vs Control group p=0.043). No clinical diferences between the BM-MSCs receiving groups were found. Conclusions: Single intraarticular injection of in vitro expanded autologous BM-MSCs is a safe and feasible proce‑ dure that results in long-term clinical and functional improvement of knee OA

Autologous intramyocardial injection of cultured skeletal muscle-derived stem cells in patients with non-acute myocardial infarction

AIM: Experimental animal studies suggest that the use of skeletal myoblast in patients with myocardial infarction may result in improved cardiac function. The aim of the study was to assess the feasibility and safety of this therapy in patients with myocardial infarction. METHODS AND RESULTS: Twelve patients with old myocardial infarction and ischaemic coronary artery disease underwent treatment with coronary artery bypass surgery and intramyocardial injection of autologous skeletal myoblasts obtained from a muscle biopsy of vastus lateralis and cultured with autologous serum for 3 weeks. Global and regional cardiac function was assessed by 2D and ABD echocardiogram. 18F-FDG and 13N-ammonia PET studies were used to determine perfusion and viability. Left ventricular ejection fraction (LVEF) improved from 35.5+/-2.3% before surgery to 53.5+/-4.98% at 3 months (P=0.002). Echocardiography revealed a marked improvement in regional contractility in those cardiac segments treated with skeletal myoblast (wall motion score index 2.64+/-0.13 at baseline vs 1.64+/-0.16 at 3 months P=0.0001). Quantitative 18F-FDG PET studies showed a significant (P=0.012) increased in cardiac viability in the infarct zone 3 months after surgery. No statistically significant differences were found in 13N-ammonia PET studies. Skeletal myoblast implant was not associated with an increase in adverse events. No cardiac arrhythmias were detected during early follow-up. CONCLUSIONS: In patients with old myocardial infarction, treatment with skeletal myoblast in conjunction with coronary artery bypass is safe and feasible and is associated with an increased global and regional left ventricular function,improvement in the viability of cardiac tissue in the infarct area and no induction of arrhythmias

Ex vivo identification and characterization of a population of CD13high CD105+ CD45- mesenchymal stem cells in human bone marrow

Introduction: Mesenchymal stem cells (MSCs) are multipotent cells capable of self-renewal and multilineage differentiation. Their multipotential capacity and immunomodulatory properties have led to an increasing interest in their biological properties and therapeutic applications. Currently, the definition of MSCs relies on a combination of phenotypic, morphological and functional characteristics which are typically evaluated upon in vitro expansion, a process that may ultimately lead to modulation of the immunophenotypic, functional and/or genetic features of these cells. Therefore, at present there is great interest in providing markers and phenotypes for direct in vivo and ex vivo identification and isolation of MSCs. Methods: Multiparameter flow cytometry immunophenotypic studies were performed on 65 bone marrow (BM) samples for characterization of CD13high CD105+ CD45- cells. Isolation and expansion of these cells was performed in a subset of samples in parallel to the expansion of MSCs from mononuclear cells following currently established procedures. The protein expre

Solar cell process development in the european integrated project crystalclear

CrystalClear is a large integrated project funded by the European Commission that aims to drastically reduce the cost of crystalline Si PV modules, down to 1 Euro/Wp. Among the different subprojects, the one dealing with the development of advanced solar cells is relatively large (with 11 partners out of the 15 Crystal Clear partners taking part) and has a crucial role. The goal of the subproject is to develop cell design concepts and manufacturing processes that would enable a reduction in the order of 40% of the cell processing costs per Wp. In this paper, we give an overview of all the development work that has taken place in the CrystalClear solar cells subproject so far. World class results have been achieved, particularly on high efficiency cells on Si ribbons, and on industrial-type solar cells on very thin (120 (j.m thick) substrates