Nuclear power systems for lunar and Mars exploration

Initial studies of a variety of mission scenarios for the new Space Exploration Initiative, and the technologies necessary to enable or significantly enhance them, have identified the development of advanced space power systems whether solar, chemical or nuclear to be of prime importance. Lightweight, compact, reliable power systems for planetary rovers and a variety of surface vehicles, utility surface power, and power for advanced propulsion systems have been identified as critical needs for these missions. These mission scenarios, the concomitant power system requirements, and power system options considered are discussed. The significant potential benefits of nuclear power are identified for meeting the power needs of the above applications

Arcjet nozzle design impacts

The effect of nozzle configuration on the operating characteristics of a low power dc arcjet thruster was determined. A conical nozzle with a 30 deg converging angle, a 20 deg diverging angle, and an area ratio of 225 served as the baseline case. Variations on the geometry included bell-shaped contours both up and downstream, and a downstream trumpet-shaped contour. The nozzles were operated over a range of specific power near that anticipated for on-orbit operation. Mass flow rate, thrust, current, and voltage were monitored to provide accurate comparisons between nozzles. The upstream contour was found to have minimal effect on arcjet operation. It was determined that the contour of the divergent section of the nozzle, that serves as the anode, was very important in determining the location of arc attachment, and thus had a significant impact on arcjet performance. The conical nozzle was judged to have the optimal current/voltage characteristics and produced the best performance of the nozzles tested

A summary of the ECAS performance and cost results for MHD systems

The potential is examined of various advanced power plant concepts using coal and coal-derived fuel. The results indicate that open cycle coal fired direct preheat MHD systems have potentially one of the highest coal-pile-to-bus-bar efficiencies and also one of the lowest costs of electricity (COE) of the systems studied. Closed cycle MHD systems may have the potential to approach the efficiency and COE of open cycle MHD. The 1200-1500 F liquid metal MHD systems studied do not appear to have the potential of exceeding the efficiency or competing with the COE of advanced steam plants

Analysis of the variability of nursing care by pathology in a sample of nine Belgian hospitals

info:eu-repo/semantics/published27th Patient Classification Systems International (PCSI) Working Conference, Montreal, Canada, October 201

What difference does ("good") HRM make?

The importance of human resources management (HRM) to the success or failure of health system performance has, until recently, been generally overlooked. In recent years it has been increasingly recognised that getting HR policy and management "right" has to be at the core of any sustainable solution to health system performance. In comparison to the evidence base on health care reform-related issues of health system finance and appropriate purchaser/provider incentive structures, there is very limited information on the HRM dimension or its impact. Despite the limited, but growing, evidence base on the impact of HRM on organisational performance in other sectors, there have been relatively few attempts to assess the implications of this evidence for the health sector. This paper examines this broader evidence base on HRM in other sectors and examines some of the underlying issues related to "good" HRM in the health sector. The paper considers how human resource management (HRM) has been defined and evaluated in other sectors. Essentially there are two sub-themes: how have HRM interventions been defined? and how have the effects of these interventions been measured in order to identify which interventions are most effective? In other words, what is "good" HRM? The paper argues that it is not only the organisational context that differentiates the health sector from many other sectors, in terms of HRM. Many of the measures of organisational performance are also unique. "Performance" in the health sector can be fully assessed only by means of indicators that are sector-specific. These can focus on measures of clinical activity or workload (e.g. staff per occupied bed, or patient acuity measures), on measures of output (e.g. number of patients treated) or, less frequently, on measures of outcome (e.g. mortality rates or rate of post-surgery complications). The paper also stresses the need for a "fit" between the HRM approach and the organisational characteristics, context and priorities, and for recognition that so-called "bundles" of linked and coordinated HRM interventions will be more likely to achieve sustained improvements in organisational performance than single or uncoordinated interventions

Optical emission spectroscopy of electron-cyclotron-resonance-heated helium mirror plasmas

In this experiment emission spectroscopy in the 3000–5000 Å range has been utilized to determine the electron temperature (15–60 eV) and ion density (2–5 x 10 11 cm −3 ) of helium plasmas produced by the Michigan mirror machine (1) (MIMI). The plasma is generated and heated by whistler-mode electron-cyclotron resonance (ECR) waves at 7.43 GHz with 400–900 W power in 80-ms-long pulses. Gas fueling is provided at the midplane region by a leak valve with a range in pressure of 3 x 10 to 2 x 10 4 Torr. Emission line intensities are interpreted using a model of the important collisional and radiative processes occurring in the plasma. The model examines secondary processes such as radiation trapping, excitation transfer between levels of the carne principle quantum number, and excitation front metastable states for plasmas in the parameter range of MIMI ( n c = 1−6 x 10 11 cm −3 ). Front the analysis of line intensity ratios for neutral helium, the electron temperature is measured and its dependence upon the gas pressure and microwave power is determined. These temperatures agree with those obtained by Langmuir probe measurements. Art analysis of the line intensity ratio between singly ionized helium and neutral helium yields a measurement of the ion density which is in good agreement with electron density measurements made by a microwave interferometer.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/45473/1/11090_2005_Article_BF01447032.pd

Urbanization may limit impacts of an invasive predator on native mammal diversity

Our understanding of the effects of invasive species on faunal diversity is limited in part because invasions often occur in modified landscapes where other drivers of community diversity can exacerbate or reduce the net impacts of an invader. Furthermore, rigorous assessments of the effects of invasive species on native communities that account for variation in sampling, species-specific detection and occurrence of rare species are lacking. Invasive Burmese pythons (Python molurus bivittatus) may be causing declines in medium- to large-sized mammals throughout the Greater Everglades Ecosystem (GEE); however, other factors such as urbanization, habitat changes and drastic alteration in water flow may also be influential in structuring mammal communities. The aim of this study was to gain an understanding of how mammal communities simultaneously facing invasive predators and intensively human-altered landscapes are influenced by these drivers and their interactions