Demonstration of synchronised scanning Lidar measurements of 2D velocity fields in a boundary-layer wind tunnel

This paper combines the currently relevant research methodologies of scaled wind turbine model experiments in wind tunnels with remote-sensing short-range WindScanner Lidar measurement technology. The wind tunnel of the Politecnico di Milano was equipped with three wind turbine models and two short-range WindScanner Lidars to demonstrate the benefits of synchronised scanning Lidars in such experimental surroundings for the first time. The dual- Lidar system can provide fully synchronised trajectory scans with sampling time scales ranging from seconds to minutes. First, staring mode measurements were compared to hot wire probe measurements commonly used in wind tunnels. This yielded goodness of fit coefficients of 0.969 and 0.902 for the 1 Hz averaged u- and v-components of the wind speed, respectively, validating the 2D measurement capability of the Lidar scanners. Subsequently, the measurement of wake profiles on a line as well as wake area scans were executed to illustrate the applicability of Lidar scanning to measuring small scale wind flow effects. The downsides of Lidar with respect to the hot wire probes are the larger measurement probe volume and the loss of some measurements due to moving blades. In contrast, the benefits are the high flexibility in conducting both point measurements and area scanning, and the fact that remote sensing techniques do not disturb the flow while measuring. The research campaign revealed a high potential for using short-range WindScanner Lidar for accurately measuring small scale flow structures in a wind tunnel

Utilization of photon orbital angular momentum in the low-frequency radio domain

We show numerically that vector antenna arrays can generate radio beams which exhibit spin and orbital angular momentum characteristics similar to those of helical Laguerre-Gauss laser beams in paraxial optics. For low frequencies (< 1 GHz), digital techniques can be used to coherently measure the instantaneous, local field vectors and to manipulate them in software. This opens up for new types of experiments that go beyond those currently possible to perform in optics, for information-rich radio physics applications such as radio astronomy, and for novel wireless communication concepts.Comment: 4 pages, 5 figures. Changed title, identical to the paper published in PR

Solar assisted pervaporation (SAP) for preserving and utilizing fruits in developing countries

Paper presented to the 3rd Southern African Solar Energy Conference, South Africa, 11-13 May, 2015.The purpose of this work is to develop and implement a simple and robust preservation technology that can enhance food and economic security and thereby improve the lives of people in developing countries. The technique under development is termed “solar assisted pervaporation (SAP)”. It is a sustainable technology whereby fruit juices or purées are concentrated using reusable pouches made of “breathable textiles”. The active layer of the textile is permeable to water vapour but not liquid water, and the process is related to the techniques pervaporation and membrane distillation. The pouches are filled with the juice/purée, hung from a tree or placed on a roof or in a solar dryer, and then exposed to sun and air for a specified period of time. A storage stable concentrate can be produced within 10 to 45 hours (depending on the conditions) and the entire concentration process is done using only solar energy. The fruit juice concentrate can be stored in the household or sold, thereby increasing both food and economic security in local communities. To demonstrate the feasibility of this technique, three different fruits/juices were concentrated by placing prototype pouches in a convective dryer to simulate a ventilated solar collector, or by exposing the pouches to a solar lamp equipped with convective air circulation to simulate ambient drying with direct sunlight exposure. Drying curves were obtained experimentally and the concentrates were analysed in terms of moisture content, water activity and degrees Brix. Depending on the drying time and type of fruit, the resulting product can be syrup-like, pasty, or have the texture of fruit leather. Under certain drying conditions, the water removal rate is actually higher for the pouch versus an open dish of the same dimensions because the pouch has two sides for mass transfer. Horizontal drying was found to be more effective than vertical drying and dissolved solids content was found to affect drying rate. Initial tests with a solar lamp have shown that drying rate increases with increasing radiant energy flux. It was also found that composition (fiber vs. sugar content) and form (purée vs. juice) of the fruit determines its compatibility with the pouch and drying technique. The results indicate that the technique is feasible and have given insight into how the bag should be designed.dc201

The Australian Aboriginal Birth Cohort study: socio-economic status at birth and cardiovascular risk factors to 25 years of age

Objectives: To determine whether socio‐economic status at birth is associated with differences in risk factors for cardiovascular disease — body mass index (BMI), blood pressure, blood lipid levels — during the first 25 years of life.Design: Analysis of prospectively collected data.Setting, participants: 570 of 686 children born to Aboriginal mothers at the Royal Darwin Hospital during 1987–1990 and recruited for the Aboriginal Birth Cohort Study in the Northern Territory. Participants resided in 46 urban and remote communities across the NT. The analysed data were collected at three follow‐ups: Wave 2 in 1998–2001 (570 participants; mean age, 11 years), Wave 3 in 2006–2008 (442 participants; mean age, 18 years), and Wave 4 in 2014–2016 (423 participants; mean age, 25 years).Main outcome measures: Cardiovascular disease risk factors by study wave and three socio‐economic measures at the time of birth: area‐level Indigenous Relative Socioeconomic Outcomes (IRSEO) index score and location (urban, remote) of residence, and parity of mother.Results: Area‐level IRSEO of residence at birth influenced BMI (P Conclusions: Our longitudinal life course analyses indicate that area‐level socio‐economic factors at birth influence the prevalence of major cardiovascular disease risk factors among Indigenous Australians during childhood and early adulthood.</p