25 research outputs found
Tectonic evolution of the Karakoram metamorphic complex (NW Himalayas) reflected in the 3D structures of spiral garnets: Insights from X-ray computed micro-tomography
We thank Pentti Hölttä and Syed Zahid Shah for many useful discussions.
We thank the referees, F. George and an anonymous reviewer, for
their constructive comments.Spiral garnet porphyroblasts are known to record lengthy periods of deformation and metamorphism by preserving single or multiple FIAs (Foliation Intersection Axis) formed normal to tectonic shortening directions. Thanks to technological advances in X-ray computed micro-tomography (XCMT), FIAs can now be readily determined in relatively large samples in contrast to previous methods that require the preparation of a set of radial vertical and horizontal thin sections of samples. XCMT scanning not only alleviates tedious thin section based procedures but also illuminates the complete internal architecture of a rock sample allowing three-dimensional (3D) quantitative shape analysis of an individual porphyroblast as well as precise measurement of FIAs. We applied the technique to a sample from the Hunza Valley in the Karakoram metamorphic complex (KMC), NW Himalayas, containing numerous garnet porphyroblasts with spiral-shaped inclusion trails. The XCMT imaging reveals an E-Wtrending FIA within the sample, which is consistent with orthogonal N-S collision of the India-Kohistan Island Arc with Asia. Garnet long axes (X-GT) have variable plunges that define a broad sub-vertical maximumand a small sub-horizontalmaximum. The X-GT principle maxima lie at N-090 and N-120. Smaller maxima lie at N-020 and N- 340. Geometric relationships between X-GT axes and FIA orientation in the sample suggest that porphyroblast shapes are controlled by the geometry of the lens-shaped microlithons in which they tend to nucleate and grow. The orientation of inclusion trails and matrix foliations in the sample are correlated with three discrete tectono-metamorphic events that respectively produced andalusite, sillimanite and kyanite in the KMC. Late staurolite growth in the sample reveals howthe rocks extruded to the surface via a significant role of roll-on tectonics, which can be correlated with the Central Himalayas
Integrating X-ray computed tomography with chemical imaging to quantify mineral re-crystallization from granulite to eclogite metamorphism in the Western Italian Alps (Sesia-Lanzo Zone)
Metamorphic transformations and fabric evolution are the consequence of thermo-dynamic processes, lasting from thousands to millions of years. Relative mineral percentages, their grain size distribution, grain orientation, and grain boundary geometries are first-order parameters for dynamic modeling of metamorphic processes. To quantify these parameters, we propose a multidisciplinary approach integrating X-ray computed microtomography (\u3bc-CT) with X-ray chemical mapping obtained from an Electron MicroProbe Analyzer (EMPA). We used a metapelitic granulite sample collected from the Alpine HP-LT metamorphic rocks of the Mt. Mucrone (Eclogitic Micaschists Complex, Sesia-Lanzo Zone, Western Alps, Italy). The heterogeneous Alpine deformation and metamorphism allowed the preservation of pre-alpine structural and mineralogical features developed under granulite-facies conditions. The inferred granulitic mineral association is Grt + Bt + Sil + Pl + Qtz \ub1 Ilm \ub1 Kfs \ub1 Wm. The subsequent pervasive static eclogite-facies re-equilibration occurred during the alpine evolution. The inferred alpine mineral association is Wm + Omp \ub1 Ky + Qtz + Grt though local differences may occur, strongly controlled by chemistry of microdomains. X-ray \u3bc-CT data extracted from centimeter-sized samples have been analyzed to quantify the volumetric percentage and shape preferred orientation (SPO) for each mineral phase. By combining tomographic phase separation with chemical variation and microstructures (i.e., different grain-size classes for the same phase and morphology of different pre-alpine microdomains) the pre-alpine mineralogical phases from the alpine overprint have been distinguished and quantified. Moreover, the sample preserves 100% of the pre-alpine granulite fabric, which surprisingly corresponds to less than 22% of the corresponding pre-alpine metamorphic assemblages, while the alpine eclogitic static assemblage corresponds to 78% though no new fabric is developed. This contribution demonstrates that the combined use of EMPA X-ray chemical mapping with the X-ray \u3bc-CT shape analysis permits a dynamic approach to constrain the chemistry of the mineral phases linked to the development of metamorphic-related static and dynamic fabrics
The interrelationship between deformation and metamorphism
The interrelationship between deformation and metamorphism is a topic of active research connecting such disciplines as structural geology, metamorphic petrology, geochronology, material science and economic geology. This special issue is dedicated to a notable scientist who is also our friend, mentor and colleague Prof. Tim H. Bell (James Cook University of North Queensland, Australia). The eight papers in this issue were presented at a conference last year in Granada (Spain) at the occasion of Tim's retirement. An additional set of ~15 papers will appear in Tectonophysics as fruit of the same conference
Tectonic evolution of the Karakoram metamorphic complex (NW Himalayas) reflected in the 3D structures of spiral garnets: Insights from X-ray computed micro-tomography
Spiral garnet porphyroblasts are known to record lengthy periods of deformation and metamorphism by preserving single or multiple FIAs (Foliation Intersection Axis) formed normal to tectonic shortening directions. Thanks to technological advances in X-ray computed micro-tomography (XCMT), FIAs can now be readily determined in relatively large samples in contrast to previous methods that require the preparation of a set of radial vertical and horizontal thin sections of samples. XCMT scanning not only alleviates tedious thin section based procedures but also illuminates the complete internal architecture of a rock sample allowing three-dimensional (3D) quantitative shape analysis of an individual porphyroblast as well as precise measurement of FIAs. We applied the technique to a sample from the Hunza Valley in the Karakoram metamorphic complex (KMC), NW Himalayas, containing numerous garnet porphyroblasts with spiral-shaped inclusion trails. The XCMT imaging reveals an E–W trending FIA within the sample, which is consistent with orthogonal N–S collision of the India-Kohistan Island Arc with Asia. Garnet long axes (X) have variable plunges that define a broad sub-vertical maximum and a small sub-horizontal maximum. The X principle maxima lie at N-090 and N-120. Smaller maxima lie at N-020 and N-340. Geometric relationships between X axes and FIA orientation in the sample suggest that porphyroblast shapes are controlled by the geometry of the lens-shaped microlithons in which they tend to nucleate and grow. The orientation of inclusion trails and matrix foliations in the sample are correlated with three discrete tectono-metamorphic events that respectively produced andalusite, sillimanite and kyanite in the KMC. Late staurolite growth in the sample reveals how the rocks extruded to the surface via a significant role of roll-on tectonics, which can be correlated with the Central Himalayas
Kinematics of subduction in the ibero-armorican arc constrained by 3D microstructural analysis of garnet and pseudomorphed lawsonite porphyroblasts from ĂŽle de Groix (Variscan belt)
The small island of Groix in southern Brittany, France, is well known for exceptionally well-preserved outcrops of Variscan blueschists, eclogites, and garnetiferous mica schists that mark a Late Devonian suture between Gondwana and Armorica. The kinematics of polyphase deformation in these rocks is reconstructed based on 3D microstructural analysis of inclusion trails within garnet and pseudomorphed lawsonite porphyroblasts using differently oriented thin sections and X-ray tomography. Three sets of inclusion trails striking NE-SW, NNW-SSE, and WNW-ESE are recognized and interpreted to witness a succession of different crustal shortening directions orthogonal to these strikes. The curvature sense of sigmoidal and spiral-shaped inclusion trails of the youngest set is shown to be consistent with northwest and northward subduction of Gondwana under Armorica, provided that these microstructures developed by overgrowth of actively forming crenulations without much porphyroblast rotation. Strongly non-cylindrical folds locally found on the island are reinterpreted as fold-interference structures instead of having formed by progressive shearing and fold-axis reorientation. Six samples of a lower-grade footwall unit of the Groix ophiolitic nappe (Pouldu schists) were also studied. Inclusion trails in these rocks strike E-W, similar to the youngest set recognized on Groix island. They record Carboniferous N-S shortening during continental collision. These new microstructural data from southern Brittany bear a strong resemblance to earlier measured in inclusion-trail orientations in the northwestern Iberia Massif. A best fit between both regions suggests not more than about 15° anticlockwise rotation of Iberia during the Cretaceous opening of the Gulf of Biscay.The research was supported by Spanish government project CGL2016-80687-R AEI/FEDER and projects RNM148, P18-RT-3275 and B-RNM-301-UGR18 of the Andalusia Autonomous Governmen
A succession of near-orthogonal horizontal tectonic shortenings in the Paleoproterozoic Central Lapland Greenstone Belt of Fennoscandia: constraints from the world-class Suurikuusikko gold deposit
The relative and absolute timing of orogenic gold deposits in complex structural settings are active and challenging topics of research, especially in Precambrian greenstone belts. The Suurikuusikko gold deposit in Central Lapland Greenstone Belt is currently the largest primary gold producing deposit in Europe, located on a slight bend of the strike-slip Kiistala shear zone (KiSZ). Gold is refractory and locked inside arsenopyrite and pyrite. In this study, different structural features were investigated along the KiSZ from the recently stripped Etelä pit, which is the southern extension of the Suurikuusikko ore body. Our data source ranges from aeromagnetic to high-resolution aerial images, X-ray computed tomography scans of selected rock samples and regional geological and geophysical datasets. The KiSZ has recorded five discrete deformation phases, spanning between ca. 1.92 and 1.76 Ga. The refractory gold at the Suurikuusikko deposit formed during E-W contraction related to the D1 thrusting phase. This was followed by a N-S shortening event (D2), where most of the strain was taken up by the northern and southern thrusts. Tectonic vectors then switched from N-S to NE-SW and, as a result, dextral strike-slip regime (D3) commenced along the KiSZ. This event exsolved invisible gold from the sulfides and remobilized it along with fractures. A near-orthogonal switch of the regional stress regime from NE-SW to NW-SE flipped the kinematics of the KiSZ from dextral to sinistral (D4). The last deformation phase (D5) produced widespread veining under E-W contraction and secured gold mineralization at the Iso-Kuotko gold deposit within the KiSZ.Open access funding provided by the Geological Survey of Finland (GTK). This work was supported by the Academy of Finland via RAMI infrastructure project (#293109). The Academy of Finland supported “MinSysPro” (Mineral Systems and Mineral Prospectivity in Finnish Lapland) project #281670. DAwas supported by Spanish project CGL2016-80687-R and Junta de Andalucia project RNM-148
Multi-stage mountain building vs. relative plate motions in the Betic Cordillera deduced from integrated microstructural and petrological analysis of porphyroblast inclusion trails
The tectonic evolution of the Betic Cordillera has been investigated through integrated microstructural and petrological analysis of 93 samples of garnetiferous Grt±Cld±Plg±Ky±St phengite schists from its lowermost allochthon, the Nevado-Filabride Domain. Porphyroblast inclusion trails in these samples exhibit well-developed preferred vertical and horizontal orientations and truncational relationships. These features indicate a complex history of multiple crenulation cleavage development during alternating contractional and gravity-induced deformations. Associated Foliation-Intersection Axes preserved in porphyroblasts (FIA) were determined separately for 2 groups of samples using the "asymmetry technique" (Bell et al., 1995) and the "FitPitch" method (Aerden, 2003), respectively. Broadly consistent results establish a succession of 4 FIA sets with specific trends, which from the oldest to the youngest FIA set are: NE–SW (FIA set 1), NW–SE (FIA set 2), W–E (FIA set 3) and NNW–SSE (FIA set 4). This trend sequence is also reflected in the orientations of successive fold generations and associated lineations. More remarkably, the FIA-trend sequence mimics known changes in the plate motions of Africa and Adria relative to Iberia in the 50– 10 Ma interval. This is also the time span indicated by published radiometric ages. Garnet-isopleth thermobarometry applied to selected samples and compositional zoning of garnets indicate that the earliest 3 FIA sets formed along a prograde metamorphic path from ca. 5 kb/500 °C to 10 kb/550 °C, whereas the latest stages of FIA set 3 and FIA set 4 developed during exhumation. Exhumation involved a period of heterogeneous reheating that was spatially and temporally linked to emplacement of the overlying Alpujarride Complex
Macrostructures vs microstructures in evaporite detachments: an example from the Salt Range, Pakistan
Abstract not availableL. Richards, R.C. King, A.S. Collins, M. Sayab, M.A. Khan, M. Haneef, C.K. Morley, J. Warre