16 research outputs found
Record Endurance for Single-Walled Carbon Nanotube–Based Memory Cell
We study memory devices consisting of single-walled carbon nanotube transistors with charge storage at the SiO2/nanotube interface. We show that this type of memory device is robust, withstanding over 105 operating cycles, with a current drive capability up to 10−6 A at 20 mV drain bias, thus competing with state-of-the-art Si-devices. We find that the device performance depends on temperature and pressure, while both endurance and data retention are improved in vacuum
A fast and low-power microelectromechanical system-based non-volatile memory device
Several new generation memory devices have been developed to overcome the low performance of conventional silicon-based flash memory. In this study, we demonstrate a novel non-volatile memory design based on the electromechanical motion of a cantilever to provide fast charging and discharging of a floating-gate electrode. The operation is demonstrated by using an electromechanical metal cantilever to charge a floating gate that controls the charge transport through a carbon nanotube field-effect transistor. The set and reset currents are unchanged after more than 11 h constant operation. Over 500 repeated programming and erasing cycles were demonstrated under atmospheric conditions at room temperature without degradation. Multinary bit programming can be achieved by varying the voltage on the cantilever. The operation speed of the device is faster than a conventional flash memory and the power consumption is lower than other memory devices
Surface plasmon effects on carbon nanotube field effect transistors
Herein, we experimentally demonstrate surface plasmon polariton (SPP) induced changes in the conductivity of a carbon nanotubefield effect transistor(CNTFET). SPP excitation is done via Kretschmann configuration while the measured CNTFET is situated on the opposite side of the metal layer away from the laser, but within reach of the launched SPPs. We observe a shift of ∼0.4 V in effective gate voltage. SPP-intermediated desorption of physisorbed oxygen from the device is discussed as a likely explanation of the observed effect. This effect is visible even at low SPP intensities and within a near-infrared range.Peer reviewe
First Principles Study of the Binding of 4d and 5d Transition Metals to Graphene
We study the strength of the binding of 4d and 5d transition metals on a graphene sheet in the limit of high-coverage using first principles density functional theory. A database of the binding energies is presented. Our results show that the elements with low or near-half occupation of the d shell bind strongest to the graphene sheet. We find a transfer of electrons from the transition metal to the graphene sheet; the charge transfer decreases with increasing d shell occupation. Motivated by the strong binding to Hf we also study the binding of graphene to the Hf rich surface of HfO2. The predicted binding energy of −0.18 eV per C atom when coupled with the existing integration of HfO2 into Si-based CMOS devices suggests a new route to integrating graphene with silicon, allowing for an integration of graphene-based nanoelectronic components into existing silicon-based technology
Ferroelectric transistors with nanowire channel: Toward nonvolatile memory applications
10.1021/nn800808sACS Nano33700-70