1,283 research outputs found
Phonetic Similarity in Brand Name Innovation
When developing a new brand name, similarity of the new brand name to an existing brand name may affect perceptions of the new brand name. However, marketers typically have little guidance on the optimal level of similarity versus originality. Based on linguistic theory, we develop a method to determine this optimal level. In four experiments, we examine the phonetic similarity of a company’s new brand names to the company’s original brand name, implementing a highly controlled methodology based on linguistic rules. When pre-existing attitudes towards a company are positive, an inverted U-shaped pattern is observed in brand name attitudes, such that moderate levels of phonetic similarity are preferred over closer or more distant levels of phonetic similarity. When pre-existing attitudes towards a company are negative, an opposite, U-shaped pattern is observed, such that moderate levels of phonetic similarity are less preferred over closer or more distant levels of phonetic similarity. However, when there are no pre-existing attitudes towards the company, a direct, linear relation between phonetic similarity and attitudes is observed, such that close levels are preferred over moderate levels which, in turn, are preferred over distant levels, consistent with a simple familiarity effect on brand name attitudes.Brand Names, Linguistics, Attitudes
Writing Through It
This memoir spans several years of the author\u27s life. It begins with the early years of high school, and the beautiful mess that comes with them, and ends in the rebuilding of a life following complete devastation. This manuscript incorporates poetry in order to emulate the raw vulnerability and emotion that could not fit in a prose piece. The intermingling of the two form a poetry and memoir fusion that refuses to be contained within any number of formats
Analysis of Risks to Oxygen Systems from Particulate and Fiber Contaminants and Derivation of Cleanliness Requirements
It has been well documented in the literature that contamination within oxygen systems can create significant fire hazards. Cleanliness limits for nonvolatile residues, ranging from 10 to 500 mg/sq m, have been established for various industries and types of oxygen systems to reduce the risk of ignition of flammable organic films. Particulate cleanliness limits used for oxygen systems vary considerably. Maximum allowed particle size, quantity limits, and allocations for fibers or metallic particles are all variables seen in aerospace cleanliness limits. Particles are known to have the potential to ignite within oxygen systems and must be limited to prevent fires. Particulate contamination may also pose risks to the performance of oxygen systems that are unrelated to ignition hazards. An extensive literature search was performed to better understand the relative importance of particle ignition mechanisms versus other deleterious effects of particles on oxygen systems and to identify rationale for derivation of particulate cleanliness limits for specific systems. The identified risks of different types and sizes of particles and fibers were analyzed. This paper summarizes the risks identified and rationale that may be used to derive particulate cleanliness limits for specific oxygen systems
The Case for a Complexity Continuum
The case for a Complexity Continuum (CC) is presented. Past research on the effects of syntactic complexity (and other contributors to complexity, such as difficult words) in an advertising context has yielded seemingly contradictory findings. Rather than being problematic, however, it is argued in this conceptual paper that the various results from past research are complementary. By placing each study along the CC (based on medium, textual factors, and participant characteristics) one can see how results to date combined provide a clearer understanding of how complexity operates. Two experiments provide additional evidence of the validity of the CC proposed herein.textual factors, complexity, continuum
Solvent Replacement for Hydrochlorofluorocarbon-225 for Cleaning Oxygen System Components
This Technical Memorandum is the result of a 2-year project funded by the Defense Logistics Agency-Aviation, Hazardous Minimization and Green Products Branch, to identify and test two candidate solvents to replace hydrochlorofluorocarbon-225 (HCFC-225) for cleaning oxygen systems. The solvents were also compared to a second solvent composed predominantly of perfluorobutyl iodide (PFBI), which had received limited approval by the United States Air Force (USAF) for hand wipe cleaning of components for aviators breathing oxygen systems. The tests performed for this study were based on those reported in AFRL-ML-WP-TR-2003-4040, The Wipe Solvent Program, the test program used to qualify Ikon Solvent P for USAF applications.The study was completed in August 2014, prior to the completion of a more extensive study funded by the NASA Rocket Propulsion Test (RPT) program. The results of the RPT project are reported in NASA/TP-2015-18207, Replacement of Hydrochlorofluorocarbon225 Solvent for Cleaning and Verification Sampling of NASA Propulsion Oxygen Systems Hardware, Ground Support Equipment, and Associated Test Systems. The test methods used in this study for nonvolatile residue (NVR) background, materials compatibility, and cleaning effectiveness were different than those used for the RPT project; a smaller set of materials and contaminants were tested. The tests for this study were complementary to and provided supplementary information for the down-selection process during the course of the test program reported in NASA/TP-2015-218207
Analysis and Derivation of Allocations for Fiber Contaminants in Liquid Bipropellant Systems
An analysis was performed to identify the engineering rationale for the existing particulate limits in MSFC-SPEC-164, Cleanliness of Components for Use in Oxygen, Fuel, and Pneumatic Systems, determine the applicability of this rationale to fibers, identify potential risks that may result from fiber contamination in liquid oxygen/fuel bipropellant systems, and bound each of these risks. The objective of this analysis was to determine whether fiber contamination exceeding the established quantitative limits for particulate can be tolerated in these systems and, if so, to derive and recommend quantitative allocations for fibers beyond the limits established for other particulate. Knowledge gaps were identified that limit a complete understanding of the risk of promoted ignition from an accumulation of fibers in a gaseous oxygen system
Replacement of Hydrochlorofluorocarbon (HCFC) -225 Solvent for Cleaning and Verification Sampling of NASA Propulsion Oxygen Systems Hardware, Ground Support Equipment, and Associated Test Systems
Since the 1990's, when the Class I Ozone Depleting Substance (ODS) chlorofluorocarbon-113 (CFC-113) was banned, NASA's rocket propulsion test facilities at Marshall Space Flight Center (MSFC) and Stennis Space Center (SSC) have relied upon hydrochlorofluorocarbon-225 (HCFC-225) to safely clean and verify the cleanliness of large scale propulsion oxygen systems. Effective January 1, 2015, the production, import, export, and new use of HCFC-225, a Class II ODS, was prohibited by the Clean Air Act. In 2012 through 2014, leveraging resources from both the NASA Rocket Propulsion Test Program and the Defense Logistics Agency - Aviation Hazardous Minimization and Green Products Branch, test labs at MSFC, SSC, and Johnson Space Center's White Sands Test Facility (WSTF) collaborated to seek out, test, and qualify a replacement for HCFC-225 that is both an effective cleaner and safe for use with oxygen systems. Candidate solvents were selected and a test plan was developed following the guidelines of ASTM G127, Standard Guide for the Selection of Cleaning Agents for Oxygen Systems. Solvents were evaluated for materials compatibility, oxygen compatibility, cleaning effectiveness, and suitability for use in cleanliness verification and field cleaning operations. Two solvents were determined to be acceptable for cleaning oxygen systems and one was chosen for implementation at NASA's rocket propulsion test facilities. The test program and results are summarized. This project also demonstrated the benefits of cross-agency collaboration in a time of limited resources
Results of the Test Program for Replacement of AK-225G Solvent for Cleaning NASA Propulsion Oxygen Systems
Since the 1990's, when the Class I Ozone Depleting Substance chlorofluorocarbon-113 was banned, NASA's propulsion test facilities at Marshall Space Flight Center and Stennis Space Center have relied upon the solvent Asahiklin AK-225 (hydrochlorofluorocarbon-225ca/cb or HCFC-225ca/cb) and, more recently AK-225G (the single isomer form, HCFC-225cb) to safely clean and verify the cleanliness of large scale propulsion oxygen systems. Effective January 1, 2015, the production, import, export, and new use of Class II Ozone Depleting Substances, including AK-225G, was prohibited in the United States by the Clean Air Act. In 2012 through 2014, NASA test labs at MSFC, SSC, and Johnson Space Center's White Sands Test Facility collaborated to seek out, test, and qualify a solvent replacement for AK-225G that is both an effective cleaner and safe for use with oxygen systems. This paper summarizes the tests performed, results, and lessons learned
Racial Differences in Conceptualizing Legitimacy and Trust in Police
Scholarly debate on how best to conceptualize legitimacy and trust in police has generally assumed these conceptualizations are stable across demographics. Recent evidence, however, suggests that this may not be the case. We examine how the public conceptualizes legitimacy and trust in police, how public conceptualizations relate to academic debate on these terms, and how public views differ between and within racial groups. This work is exploratory, though it is rooted in differences found in theoretically driven empirical work on the subject. Data are from online, national samples of White (N = 650), Black (N = 624), and Hispanic (N = 626) adults in the United States that are approximately representative of each racial group on key demographics. We asked participants to define legitimacy and trust and to indicate whether or not they view the terms as synonymous. We found numerous between-race and within-race differences in citizen-driven conceptualizations of legitimacy and trust. Results suggest that legitimacy and trust mean different things to different groups of people. Additionally, results show that public definitions of legitimacy and trust align with some academic conceptualizations but not others. We expect this research to inform the academic literature on defining legitimacy and trust
- …