Assessment of drought impacts on vegetation health: a case study in Kedah

Prolonged drought in the early of 2014 has caused Malaysia to experience water supply shortage which directly affects both health and growth of vegetation. Thus this study aims to assess the risk vegetation areas that were impacted during 2014's drought by integrating the Standardized Precipitation Index (SPI) and Normalized Differentiation Vegetation Index (NDVI) methods. These two methods were able to assess the risk areas for the vegetation by measuring its health and classifying them according to its severity while considering the rainfall reduction at the specific time and location. The results obtained from this study shows that the central and north west of Kedah was vulnerable to the occurrence of drought. Kedah was more impacted by the dry event during the northeast monsoon. This study is significant as a fundamental input for further research and as an alternative approach by the application of space technology

Reduced graphene oxide-multiwalled carbon nanotubes hybrid film with low Pt loading as counter electrode for improved photovoltaic performance of dye-sensitised solar cells

In this work, the role of reduced graphene oxide (rGO) with hyperbranched surfactant and its hybridisation with multiwalled carbon nanotubes (MWCNTs) and platinum (Pt) nanoparticles (NPs) as counter electrode (CE) were investigated to determine the photovoltaic performance of dye-sensitised solar cells (DSSCs). Sodium 1,4-is(neopentyloxy)-3-(neopentyloxycarbonyl)- 1,4-dioxobutane-2-sulphonate (TC14) surfactant was utilised as dispersing and stabilising agent in electrochemical exfoliation to synthesise graphene oxide (GO) as initial solution for rGO production prior to its further hybridisation and fabrication as thin film. A chemical reduction process utilising hydrazine hydrate was conducted to produce rGO due to the low temperature process and water-based GO solution. Subsequently, hybrid solution was prepared by mixing 1 wt% MWCNTs into the produced rGO solution. TC14-rGO and TC14-rGO_MWCNTs hybrid solution were transferred into fluorine-doped tin oxide substrate to fabricate thin film by spraying deposition method. Finally, the CE films were prepared by coating with thin Pt NPs. Photoanode film was prepared by a two-step process: hydrothermal growth method to synthesise titanium dioxide nanowires (TiO2 NWs) and subsequent squeegee method to apply TiO2 NPs. According to solar simulator measurement, the highest energy conversion efficiency (η) was achieved by using CE-based TC14-rGO_MWCNTs/Pt (1.553%), with the highest short current density of 4.424 mA/cm2. The highest η was due to the high conductivity of CE hybrid film and the morphology of fabricated TiO2 NWs/TiO2 NPs. Consequently, the dye adsorption was high, and the photovoltaic performance of DSSCs was increased. This result also showed that rGO and rGO_MWCNTs hybrid can be used as considerable potential candidate materials to replace Pt gradually

Study on feed-in-tariff (FiT) for BIPV system, a Malaysia scenario

Feed-In Tariff (FiT) was introduced in Malaysia in 2004 and has been undergone many stages to make its implementation in Malaysia successful. The first Building Integrated Photovoltaic (BIPV) introduced in Malaysia is Suria 1000 under the supervision of Pusat Tenaga Malaysia (PTM). The aim of this paper was to study the FiT and BIPV implementation in Malaysia. It is observed that Malaysian did not invest in BIPV due to its expensive investment. The FiT Calculator was developed to prove the benefits of FiT in BIPV by practically calculating the investment and profit in the long run which was after 21 years of implementation. FiT Calculator was developed using Microsoft Visual Basic 2010 and variable parameter such as the solar irradiation, types of solar panel and inverter were studied to obtain the estimation of power output, the annual income, net income and the payback period of BIPV. Results of all case studies were verified with MBIPV mileage report and the built FiT Calculator has shown up to 96.89% accuracy against the case study done

Study on the performance of two topology multilevel inverter

It has been accepted that conventional inverters have limitation dealing with high voltage and high power applications. Lately, multilevel inverters are popular for high power applications due to its improved harmonic profile and increased power ratings. There are various literatures regarding topology and control techniques of multilevel inverters. This paper presents the performance of two Flying Capacitor Multilevel Inverter (FCMI) topologies particularly a 3-level and 5-level multilevel inverters. Besides that, concept of the topologies and its modulation techniques were described. Sinusoidal pulse width modulation (SPWM) techniques were utilized in this paper as the topologies control strategy. Two control parameters, namely the amplitude modulation index, ma and the frequency modulation index, mfwere varied in order to control the output voltage of the inverters. The model and simulation study were carried out using Matlab/Simulink software. Analyses on the performance of the two topologies were based on the fundamental voltage, output voltage waveform, output harmonic spectrum and total harmonic distortion (THD). It’s found that the five level FCMI have shown better performance in terms of THD compared to the three level FCMI in all conditions of varied ma and mf. Based on the study also, five level FCMI shows a better voltage output waveform; close to a sinusoidal waveform compared to the three level FCMI

Development of modified double-weight code and its implementation in multi-rate transmissions

This paper presents a new code structure and its ability in supporting multiple transmission rates in point to point Spectral Amplitude Coding- Optical Code Division Multiple Access (SAC-OCDMA) links. The Double-Weight (DW) code family that has a basic fixed weight of 2 was proposed. Modified Double Weight (MDW) Code is a DW code family variation that has variable weight of greater than two. The ability of MDW codes to support simultaneous transmissions at different bit rates is shown through simulated results of the bit error rate (BER) and the eye patterns. Four MDW encoded channels were used at the bit rates of 2.5Gbps and 10Gbps. MDW code shown here significantly performs better than Hadamard and Modified Frequency Hopping (MFH) codes

Circle grid fractal plate as a turbulent generator for premixed flame: an overview

This review paper focuses to ascertain a new approach in turbulence generation on the structure of premixed flames and external combustion using a fractal grid pattern. This review paper discusses the relationship between fractal pattern and turbulence flow. Many researchers have explored the fractal pattern as a new concept of turbulence generators, but researchers rarely study fractal turbulence generators on the structure premixed flame. The turbulent flow field characteristics have been studied tand investigated in a premixed combustion application. In terms of turbulence intensity, most researchers used fractal grid that can be tailored so that they can design the characteristic needed in premixed flame. This approach makes it extremely difficult to determine the exact turbulent burning velocity on the velocity fluctuation of the flow. The decision to carry out additional research on the effect circle grid fractal plate as a turbulent generator for premixed flame should depends on the blockage ratio and fractal pattern of the grid. 1

Plasma deoxysphingolipids: a novel class of biomarkers for the metabolic syndrome?

Aims/hypothesis: Sphingolipid synthesis is typically initiated by the conjugation of l-serine and palmitoyl-CoA, a reaction catalysed by serine palmitoyltransferase (SPT). SPT can also metabolise other acyl-CoAs (C12 to C18) and other amino acids such as l-alanine and glycine, giving rise to a spectrum of atypical sphingolipids. Here, we aimed to identify changes in plasma levels of these atypical sphingolipids to explore their potential as biomarkers in the metabolic syndrome and diabetes. Methods: We compared the plasma profiles of ten sphingoid bases in healthy individuals with those of patients with the metabolic syndrome but not diabetes, and diabetic patients (n = 25 per group). The results were verified in a streptozotocin (STZ) rat model. Univariate and multivariate statistical analyses were used. Results: Deoxysphingolipids (dSLs) were significantly elevated ( $$p = {5} \times {1}{0^{{ - {6}}}}$$ ) in patients with the metabolic syndrome (0.11 ± 0.04μmol/l) compared with controls (0.06 ± 0.02μmol/l) but did not differ between the metabolic syndrome and diabetes groups. Levels of C16-sphingosine-based sphingolipids were significantly lowered in diabetic patients but not in patients with the metabolic syndrome but without diabetes (p = 0.008). Significantly elevated dSL levels were also found in the plasma and liver of STZ rats. A principal component analysis revealed a similar or even closer association of dSLs with diabetes and the metabolic syndrome in comparison with the established biomarkers. Conclusions/interpretation: We showed that dSLs are significantly elevated in patients with type 2 diabetes mellitus and non-diabetic metabolic syndrome compared with healthy controls. They may, therefore, be useful novel biomarkers to improve risk prediction and therapy monitoring in these patient

Contamination Control and Assay Results for the Majorana Demonstrator Ultra Clean Components

The MAJORANA DEMONSTRATOR is a neutrinoless double beta decay experiment utilizing enriched Ge-76 detectors in 2 separate modules inside of a common solid shield at the Sanford Underground Research Facility. The DEMONSTRATOR has utilized world leading assay sensitivities to develop clean materials and processes for producing ultra-pure copper and plastic components. This experiment is now operating, and initial data provide new insights into the success of cleaning and processing. Post production copper assays after the completion of Module 1 showed an increase in U and Th contamination in finished parts compared to starting bulk material. A revised cleaning method and additional round of surface contamination studies prior to Module 2 construction have provided evidence that more rigorous process control can reduce surface contamination. This article describes the assay results and discuss further studies to take advantage of assay capabilities for the purpose of maintaining ultra clean fabrication and process design.Comment: Proceedings of Low Radioactivity Techniques (LRT May 2017, Seoul