Influence of Socio-Economic Variables on Dry Season Fluted Pumpkin Production in Njikoka Local Government Area of Anambra State, Nigeria

The paper examined the influence of Socio economic variables on dry season fluted pumpkin production in Njikoka Local Government Area of Anambra State, Nigeria. A multi-stage sampling technique was used to select the respondents for the study. Primary data was collected by means of structured questionnaire and 3- point liket scale. Nonparametric and parametric statistical tools including frequency distribution, percentages, means, mean ranking and multiple regression analysis were deployed for the data analysis. Majority (45%) of the farmers were aged 51-60 years and 95% were females. The result revealed that 47.50% of the respondents earned N76, 000. and above, indicating poverty level slightly above the benchmark of one U.S dollar per day. The multiple regression analysis showed that income of the farmers was significantly influenced by educational level, fertilizer application and access to credit at 5% level of significance. The paper revealed the constraints of the farmers to include insufficient land, lack of credit, high cost of labour, high cost of farm inputs among others. The result also showed a dearth in extension delivery system, especially in the dissemination of useful and technical information and procurement of improved yield increasing agricultural technologies to farmers. This suggests the need for intensified efforts of extension in the areas of seminars, workshops, meetings, conferences etc for farmers. Finally, government should subsidize improved agricultural inputs to enable the farmers compete favourably with the recent challenges in agricultural production

Influence of Socio-Economic Variables on Dry Season Fluted Pumpkin Production in Njikoka Local Government Area of Anambra State, Nigeria

The paper examined the influence of Socio economic variables on dry season fluted pumpkin production in Njikoka Local Government Area of Anambra State, Nigeria. A multi-stage sampling technique was used to select the respondents for the study. Primary data was collected by means of structured questionnaire and 3- point liket scale. Nonparametric and parametric statistical tools including frequency distribution, percentages, means, mean ranking and multiple regression analysis were deployed for the data analysis. Majority (45%) of the farmers were aged 51-60 years and 95% were females. The result revealed that 47.50% of the respondents earned N76, 000. and above, indicating poverty level slightly above the benchmark of one U.S dollar per day. The multiple regression analysis showed that income of the farmers was significantly influenced by educational level, fertilizer application and access to credit at 5% level of significance. The paper revealed the constraints of the farmers to include insufficient land, lack of credit, high cost of labour, high cost of farm inputs among others. The result also showed a dearth in extension delivery system, especially in the dissemination of useful and technical information and procurement of improved yield increasing agricultural technologies to farmers. This suggests the need for intensified efforts of extension in the areas of seminars, workshops, meetings, conferences etc for farmers. Finally, government should subsidize improved agricultural inputs to enable the farmers compete favourably with the recent challenges in agricultural production

Functional polymeric coatings for csi(Tl) scintillators

The handling of inorganic scintillators (e.g., alkali metal halides) can benefit from the availability of polymeric materials able to adhere to their surface. Polymeric materials, such as epoxy resins, can act as protective coatings, as adhesives for photodiodes to be connected with the scintillator surface, and as a matrix for functional fillers to improve the optical properties of scintillators. Here, the optical properties of two epoxy resins (E-30 by Prochima, and Technovit Epox by Heraeus Kulzer) deposited on the surface of a scintillator crystal made of CsI(Tl) were investigated, in order to improve the detection of high-energy radiation. It is found that these resins are capable of adhering to the surface of alkali metal halides. Adhesion, active at the epoxy–CsI(Tl) interface, can be explained on the basis of Coulomb forces acting between the ionic solid surface and an ionic intermediate of synthesis generated during the epoxy setting reaction. Technovit Epox showed higher transparency, and it was also functionalized by embedding white powdered pigments (PTFE or BaSO4) to achieve an optically reflective coating on the scintillator surface

Antennas and photovoltaic panels: Toward a green Internet of Things

The perspective of a wide use of green power motivates the scientific community to study the possibility of fabricating integrated stand-alone devices. In particular, solar energy is one of the most promising renewable powers, and it is widely used in autonomous wireless communication systems. Specifically, integration of sensors and antennas in a solar panel represents a challenge for future technology. In this paper, the feasibility of a single integrated autonomous device equipped with WiFi capability is analyzed, discussing its potentiality in the framework of the Internet of Things

Covid-19 lockdown impacts among patients with cystic fibrosis. an italian regional reference centre experience

Background: Coronavirus pandemic has influenced our society with social distancing and management of chronic disease such as cystic fibrosis (CF). During the Italian lockdown from March to May 2020, CF patients reduced the number of outpatient visits, limited social interactions and spent more time at home. The aim of this study is to evaluate the impact of the lockdown on body mass index (BMI) and lung function tests on CF patients. Methods: We retrospectively reviewed clinical data about 111 CF patients followed in our Regional Cystic Fibrosis Reference Centre (Policlinico Umberto I, Rome) according to two periods: pre-lockdown (from October 2019-March 2020) and post-lockdown (from May 2020-October 2020). We collected data on nutritional (BMI and body weight) and lung function status; we chose the best values of the 'pre-lockdown' and 'post-lockdown' period for each patient. Patients were divided into 3 groups according to FEV1 value (Forced Expiratory Volume in the 1st second): group 1 (FEV1 <40%), group 2 (FEV1 40-70%), group 3 (FEV1 >70%). All patients received a telephone interview asking for the number of hours per week devoted to physical activity, number of pulmonary acute exacerbations and subjective evaluation of adherence to medical therapy, respiratory physiotherapy and diet, during the two periods. Results: Comparing weight, BMI and respiratory function between pre and post lockdown periods, we noticed an increase in weight during among overall patients. Male patients improved weight, BMI, FEF 25-75% (Forced Expiratory flow between 25% and 75% of vital capacity) and Tiffenau index more than female patients. The most severely compromised patients (group 1), showed a significant loss of both weight and BMI. Instead, patients with moderate respiratory function (group 2) showed a significant increase of both weight and BMI and a slightly reduced CVF (Forced Vital capacity). We found no differences among patients with good respiratory function (group 3). Comparing each clinical sub-groups, we noticed a significative improvement of weight (p = 0.018) and BMI (p = 0.030) among patients with moderate respiratory function compared to patients with compromised respiratory function. During lockdown, patients reported less physical activity, no variation in food amount and composition, more adherence to therapy (43%) and more consistent daily respiratory physiotherapy (47.6%). Conclusions: Lockdown period had benefit among CF patients in terms of weight in particular in male patient. The greatest benefit on nutritional state was observed in patients with moderate reduction of respiratory function. In addition, we noted a stabilization and sometimes a slight improvement of lung function, instead of a continuous and steady decline that is normally observed in CF patients. These beneficial effects are slight but significative, bearing in mind the general worsening that CF patients experience annually

Photonic crystal electrode to be used in organic LED structures

In this work we report the possibility to obtain a high refractive index grid anode directly on the substrate surface by fabricating a relatively large-area photonic crystal (PC) structure using the combinations of electron beam lithography (EBL) and focused ion beam (FIB) techniques. The performance of the realized photonic crystal (PC) structure were enhanced by milling the ITO layer until the glass substrate and by removing the further refractive index jump between the PC and the substrate. The good properties of highly conductive poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), ensured a continuous path for the current and a high refractive index jump for the PC structure by filling the holes in the PC structure

Genetic diversity and its impact on disease severity in respiratory syncytial virus subtype-A and -B bronchiolitis before and after pandemic restrictions in Rome

Objectives: To scrutinize whether the high circulation of respiratory syncytial virus (RSV) observed in 2021-2022 and 2022-2023 was due to viral diversity, we characterized RSV-A and -B strains causing bronchiolitis in Rome, before and after the COVID-19 pandemic. Methods: RSV-positive samples, prospectively collected from infants hospitalized for bronchiolitis from 2017-2018 to 2022-2023, were sequenced in the G gene; phylogenetic results and amino acid substitutions were analyzed. Subtype-specific data were compared among seasons. Results: Predominance of RSV-A and -B alternated in the pre-pandemic seasons; RSV-A dominated in 2021-2022 whereas RSV-B was predominant in 2022-2023. RSV-A sequences were ON1 genotype but quite distant from the ancestor; two divergent clades included sequences from pre- and post-pandemic seasons. Nearly all RSV-B were BA10 genotype; a divergent clade included only strains from 2021-2022 and 2022-2023. RSV-A cases had lower need of O2 therapy and of intensive care during 2021-2022 with respect to all other seasons. RSV-B infected infants were more frequently admitted to intensive care units and needed O2 in 2022-2023. Conclusions: The intense RSV peak in 2021-2022, driven by RSV-A phylogenetically related to pre-pandemic strains is attributable to the immune debt created by pandemic restrictions. The RSV-B genetic divergence observed in post-pandemic strains may have increased the RSV-B specific immune debt, being a possible contributor to bronchiolitis severity in 2022-2023

Effects of relaxed lockdown on pediatric er visits during sars-cov-2 pandemic in Italy

Previously, we demonstrated an 81% reduction in pediatric Emergency Room (ER) visits in Italy during the strict lockdown due to the SARS-CoV-2 pandemic. Since May 2020, lockdown measures were relaxed until 6 November 2020, when a strict lockdown was patchily reintroduced. Our aim was to evaluate the impact of the relaxed lockdown on pediatric ER visits in Italy. We performed a retrospective multicenter study involving 14 Italian pediatric ERs. We compared total ER visits from 24 September 2020 to 6 November 2020 with those during the corresponding timeframe in 2019. We evaluated 17 ER specific diagnoses grouped in air communicable and non-air communicable diseases. We recognized four different triage categories: white, green, yellow and red. In 2020 total ER visits were reduced by 51% compared to 2019 (16,088 vs. 32,568, respectively). The decrease in air communicable diseases was significantly higher if compared to non-air communicable diseases (−64% vs. −42%, respectively). ER visits in each triage category decreased in 2020 compared to 2019, but in percentage, white and red codes remained stable, while yellow codes slightly increased and green codes slightly decreased. Our results suggest that preventive measures drastically reduced the circulation of air communicable diseases even during the reopening of social activities but to a lesser extent with regard to the strict lockdown period (March–May 2020)

Micro Concentrator Concept for Cost Reduction and Efficiency Enhancement of Thin Film Chalcopyrite Photovoltaics Results from EU Joint Research Program CHEETAH

Results for research on chalcopyrite micro concentrator solar cells obtained within the framework of CHEETAH joint program are shown. A top down proof of concept study reveals close to 30 relative efficiency increase under light concentration using inkjet printed CIGSSe. A novel bottom up approach for local chalcopyrite absorbers grown from indium islands demonstrates working CISe micro cells. Millimeter sized lenses are fabricated from PMMA by a casting process to be applied as concentrator optics. For a combined exploitation of direct and diffuse light components an angular splitting concentrator based on chalcopyrite and kesterite absorber material is proposed. The scientific innovation brought will enrich further development of CIGSe solar cells and contribute to their relevance in photovoltaic energy productio

Photonic crystal electrode to be used in organic LED structures

In this work we report the possibility to obtain a high refractive index grid anode directly on the substrate surface by fabricating a relatively large-area photonic crystal (PC) structure using the combinations of electron beam lithography (EBL) and focused ion beam (FIB) techniques. The performance of the realized photonic crystal (PC) structure were enhanced by milling the ITO layer until the glass substrate and by removing the further refractive index jump between the PC and the substrate. The good properties of highly conductive poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), ensured a continuous path for the current and a high refractive index jump for the PC structure by filling the holes in the PC structure