177 research outputs found
How Business Values Determine Lack Of Innovation & Petty Entrepreneurship: The Case Of Turkey
The role of innovation in capitalist development has long been identified. For late industrializing countries, it is indispensable for achieving sustained economic growth. Turkey, as a late industrializer, has also faced serious difficulties in this regard. This paper demonstrates the significance of cultural values internalized by individuals for innovation and business attitudes. In a structure-agency setting, it argues that not only regulation through institutions and social norms but also the way economic agents comprehend modern values determine the scope of business attitude that permeates economy and society. In the Turkish context, the blend of modern (rationalistic) values with traditional ones creates a dilemma between social commitment and blatant opportunism, in time leading to the dominance of short-term profit making in the economy at the expense of societal rules and norms. By conducting linear regression analyses over a sample of 150 executive, middle and owner managers, the article demonstrates how cultural values affect innovativeness. In so doing, it unveils the relations between personality traits underlying the adoption of innovations and different cultural value characteristics
The effect of different packaging materials on proteolysis, sensory scores and gross composition of tulum cheese
In this study, tulum cheese was manufactured using raw ewe’s milk and was ripened in goat’s skin and plastic bags. The effect of ripening materials (skin bag or plastic) on proteolysis was investigated during 120 days of ripening. In addition, sensory scores of the cheeses were assessed at the 90th and 120th days. The gross composition was also determined at the initial stage of ripening. The results showed that, some significant differences were noted between cheeses ripened in goat’s skin and plastic bags in terms of gross composition due to the porous structure of skin bag, which causes moisture loses during ripening. Significant differences were observed in proteolysis indices including water, 12% tricholoroacetic acid and 5% phosphotungstic acid-soluble nitrogen fractions among the cheese samples during ripening. Proteolysis levels were higher in tulum cheeses ripened in goat’s skin.Key words: Tulum cheese, packaging material, sensory analysis, ripening, proteolysis
Growth and carcass quality of grazing Holstein bulls and Limousine x Holstein bulls and heifers slaughtered at 17 months of age
Across sexes, crossbreeding did not improve growth rate compared to HOL bulls
Crossbreeding markedly improved conformation
Heifers produced carcasses of acceptable fatness
Fatness and lean/fat colour of pasture-fed bulls were not acceptabl
Modeling and cross coupling controller development for a 6DOF laser micro-machining system
In recent years, studies on manufacturing systems have proved the importance of cooperation of positioning systems with laser cutting technology. The performance of the manufacturing system can be improved by utilizing both laser and positioning systems together. In this study, modeling and cross coupling controller development of a micromachining system which can perform on non-linear contoured surfaces is presented. Laser micromachining system is designed and assembled including a nanosecond Q-switched pulsed fiber laser, a 6-DOF hexapod manipulator, a granite table in order to absorb vibrations and an external cabin system to isolate the whole system for safety and health issues. The positioning system used here has fast response and precise positioning capabilities with a wide range of workspace. However, its performance of machining non-linear surfaces can be further improved by using a cross coupled control algorithm. On top of the loop based controllers an add-on controller is developed to improve the contouring performance by including the effects of the other feedback loops on the overall controller. Actual laser cutting results also show improvements due to the improvements in the positioning system performance. © 2017 American Automatic Control Council (AACC)
Mechanical design and position control of a modular mechatronic device (MechaCell)
Manufacturing techniques have advanced exponentially in recent years, providing means for production of smaller and more powerful electronics, which makes it compelling to design small and more powerful robots. Our work focuses on a mechanical design and position control of a modular mechatronic device called MechaCell. Mechacells are designed as modular semi-autonomous devices which can be used alone or part of a pack. In this paper our main focus is on the mechanical design of the Mechacell, especially the locomotion system which uses forces produced by a rotating unbalance that moves in a spherical domain for steering of the Mechacell. As part of the supervisory algorithm an overhead HD camera is used for position tracking of the Mechacell; the data is then sent to the Mechacells through a wireless connection. A proportional integral derivative controller is used as a base controller; then a friction compensation algorithm is added, based on the mathematical model of the Mechacell's locomotion system. Steering and locomotion controller of the Mechacell is validated using a complex motion profile in the developed testbed. © 2015 IEEE
Concurrent design of energy management and vehicle stability algorithms for a parallel hybrid vehicle using Dynamic Programming
In this paper, concurrent design of controllers for a vehicle equipped with a parallel hybrid powertrain is studied. Our work focuses on designing the two control algorithms, the energy management and the vehicle stability, concurrently which are traditionally considered separately. Dynamic Programming (DP) technique is used in order to obtain the optimal response trace for the controllers. In energy management strategy torque split ratio between engine and electric motor is used as a control signal. Additionally, in vehicle dynamics control strategy the torque split factor between front and rear axles is used as a control signal. Minimizing the fuel consumption and wheel slip is used as cost functions in energy management and vehicle dynamics control strategies respectively. Two dynamic problems are solved separately first and compared to the concurrent solution of the problems. Results show promising benefits can be obtained from the concurrent DP solution and rule extraction for designing better hybrid vehicle controllers. © 2012 AACC American Automatic Control Council)
Development of a supervisory controller for residential energy management problems
In recent years, the infrastructure that supplies energy to residential areas has started to evolve into a multi-source system, just like in automotive industry in which hybrid electric vehicles (HEVs) have been replacing conventional gasoline vehicles. Multi energy source systems considered as a potential solution for carbon emission problems despite their challenges in their operation due to increased complexity. In this paper, a control design approach successfully applied in the automotive industry is used to solve a residential energy management problem. First, a dynamic programming method is applied to obtain optimal control actions for the representative demand profiles and then by using these results, a causal supervisory controller is developed. It is found that the developed baseline controller performs 1-2% better daily in its initial form in terms of operational costs, compared to available heuristic strategies. © 2012 AACC American Automatic Control Council)
Concurrent design of energy management and vehicle traction supervisory control algorithms for parallel hybrid electric vehicles
In this paper, concurrent design of energy management (EM) and traction control algorithms for a vehicle equipped with a parallel hybrid powertrain is studied. This paper focuses on designing the two control algorithms together as one control design problem, which are traditionally considered separately. First, optimal control actions and operating points are obtained by applying dynamic programming (DP). Then, this information is used for developing a rule-based supervisory controller. Our objective is to minimize the fuel consumption and the wheel slip simultaneously. Two control problems are also solved separately and compared with the concurrent solution. Results show that promising benefits can be obtained by using the concurrent design approach rather than considering two control problems separately. Under the same conditions, the vehicle with the concurrent supervisory controller is 16% more efficient in fuel consumption and experiences 12% less wheel slip, assuming slippery road friction conditions. © 1967-2012 IEEE
Learning based cross-coupled control for multi-axis high precision positioning systems
In this paper, a controller featuring cross-coupled control and iterative learning control schemes is designed and implemented on a modular two-axis positioning system in order to improve both contour and tracking accuracy. Instead of using the standard contour estimation technique proposed with the variable gain cross-coupled control, a computationally efficient contour estimation technique is incorporated with the presented control design. Moreover, implemented contour estimation technique makes the presented control scheme more suitable for arbitrary nonlinear contours. Effectiveness of the control design is verified with simulations and experiments on a two-axis positioning system. Also, simulations demonstrating the performance of the control method on a three-axis positioning system are provided. The resulting controller is shown to achieve nanometer level contouring and tracking performance. Simulation results also show its applicability to three-axis nano-positioning systems. Copyright © 2012 by ASME
Design and analysis of a modular learning based cross-coupled control algorithm for multi-axis precision positioning systems
Increasing demand for micro/nano-technology related equipment resulted in growing interest for precision positioning systems. In this paper a modular controller combining cross-coupled control and iterative learning control approaches to improve contour and tracking accuracy at the same time is presented. Instead of using the standard error estimation technique, a computationally efficient and modular contour error estimation technique is used. The new controller is more suitable for tracking arbitrary nonlinear contours and easier to implement to multi-axis systems. Stability and convergence analysis for the proposed controller is presented with the necessary conditions. Effectiveness of the control design is verified with simulations and experiments on a two-axis positioning system. The resulting positioning system achieves nanometer level contouring and tracking performance. © 2016, Institute of Control, Robotics and Systems and The Korean Institute of Electrical Engineers and Springer-Verlag Berlin Heidelberg
- …