6,579 research outputs found

    Black hole - D-brane correspondence: An example

    Get PDF
    We explore the connection between D-branes and black holes in one particular case: a D3D3-brane compactified to four dimensions on T6/Z3T^6/Z_3. Using the DD-brane boundary state description we show the equivalence with a double extremal N=2 black hole solution of four dimensional supergravity.Comment: 15 pages, LaTeX. Contribution by C. Nunez to the conference Quantum Gravity in the Southern Cone, Bariloche 7-10 January 1998; to appear in the proceeding

    A new eclipsing binary system with a pulsating component detected by CoRoT

    Full text link
    We report the discovery of CoRoT 102980178 (R.A.= 06:50:12.10, Dec.= -02:41:21.8, J2000) an Algol-type eclipsing binary system with a pulsating component (oEA). It was identified using a publicly available 55 day long monochromatic lightcurve from the CoRoT initial run dataset (exoplanet field). Eleven consecutive 1.26m deep total primary and the equal number of 0.25m deep secondary eclipses (at phase 0.50) were observed. The following light elements for the primary eclipse were derived: HJD_MinI= 2454139.0680 + 5.0548d x E. The lightcurve modeling leads to a semidetached configuration with the photometric mass ratio q=0.2 and orbital inclination i=85 deg. The out-of-eclipse lightcurve shows ellipsoidal variability and positive O'Connell effect as well as clear 0.01m pulsations with the dominating frequency of 2.75 c/d. The pulsations disappear during the primary eclipses, which indicates the primary (more massive) component to be the pulsating star. Careful frequency analysis reveals the second independent pulsation frequency of 0.21 c/d and numerous combinations of these frequencies with the binary orbital frequency and its harmonics. On the basis of the CoRoT lightcurve and ground based multicolor photometry, we favor classification of the pulsating component as a gamma Doradus type variable, however, classification as an SPB star cannot be excluded.Comment: 16 pages, 7 figures, 3 tables, accepted to Communications in Asteroseismolog

    Electrical resistivity of the Ti4O7 Magneli phase under high pressure

    Full text link
    We have measured resistivity as a function of temperature and pressure of Ti4O7 twinned crystals using different contact configurations. Pressures over 4kbar depress the localization of bipolarons and allow the study of the electrical conduction of the bipolaronic phase down to low temperatures. For pressures P > 40 kbar the bipolaron formation transition is suppressed and a nearly pressure independent behavior is obtained for the resistivity. We observed an anisotropic conduction. When current is injected parallel to the principal axis, a metallic conduction with interacting carrier effects is predominant. A superconducting state was not obtained down to 1.2 K, although evidences of the proximity of a quantum critical point were noticed. While when current is injected non-parallel to the crystal's principal axis, we obtained a logarithmic divergence of the resistivity at low temperatures. For this case, our results for the high pressure regime can be interpreted in the framework of interacting carriers (polarons or bipolarons) scattered by Two Level Systems.Comment: 9 Revtex pages, 12 EPS figures included, submitted to The European Physical Journal B. Contact author: C. Acha (e-mail address: [email protected]

    Meson mass and confinement force driven by dilaton

    Full text link
    Meson spectra given as fluctuations of a D7 brane are studied under the background driven by the dilaton. This leads to a dual gauge theory with quark confinement due to the gauge condensate. We find that the effect of the gauge condensate on the meson spectrum is essential in order to make a realistic hadron spectrum in the non-supersymmetric case. In the supersymmetric case, however, only the spectra of the scalars are affected, but they are changed in an opposite way compared to the non-supersymmetric case.Comment: 11 pages, 2 figure

    Fabrication and Characterization of Multiband Solar Cells Based on Highly Mismatched Alloys

    Get PDF
    Multiband solar cells are one type of third generation photovoltaic devices in which an increase of the power conversion efficiency is achieved through the absorption of low energy photons while preserving a large band gap that determines the open circuit voltage. The ability to absorb photons from different parts of the solar spectrum originates from the presence of an intermediate energy band located within the band gap of the material. This intermediate band, acting as a stepping stone allows the absorption of low energy photons to transfer electrons from the valence band to the conduction band by a sequential two photons absorption process. It has been demonstrated that highly mismatched alloys offer a potential to be used as a model material system for practical realization of multiband solar cells. Dilute nitride GaAs1-xNx highly mismatched alloy with low mole fraction of N is a prototypical multiband semiconductor with a well-defined intermediate band. Currently, we are using chemical beam epitaxy to synthesize dilute nitride highly mismatched alloys. The materials are characterized by a variety of structural and optical methods to optimize their properties for multiband photovoltaic devices

    Spherical harmonic decomposition applied to spatial-temporal analysis of human high-density EEG

    Full text link
    We demonstrate an application of spherical harmonic decomposition to analysis of the human electroencephalogram (EEG). We implement two methods and discuss issues specific to analysis of hemispherical, irregularly sampled data. Performance of the methods and spatial sampling requirements are quantified using simulated data. The analysis is applied to experimental EEG data, confirming earlier reports of an approximate frequency-wavenumber relationship in some bands.Comment: 12 pages, 8 figures, submitted to Phys. Rev. E, uses APS RevTeX style

    Genes de virulencia y bacteriocinas en cepas de Enterococcus faecalis aisladas desde diferentes muestras clĂ­nicas en la RegiĂłn del Maule, Chile

    Get PDF
    Padilla, C (reprint author), Univ Talca, Dept Microbiol, Talca, Chile.The presence of virulence genes (VG) and bacteriocins from different clinical samples was studied in Enterococcus faecalis isolated from urinary tract infections (UTI), bacteremia and endodontitis and was correlated with haemolysin and gelatinase activity. We evaluated the presence of VG by PCR in 150 strains of E. faecalis including cylA, aggA, efaA, eep, gelE, esp, as-48, bac31, entL50 A/B, entA, ent P, entB, enlA and ent1071. Haemolysin and gelatinase activity was studied. gelE and cylA genes expressed hemolysin and gelatinase, respectively. This activity was observed in some strains of bacteremia, UTI and endodontitis. The highest number of VG was detected in bacteremic strains, being aggA and entA genes the most frequent. efaA, esp, entA, entL50A/B were associated with their clinical origin (p <0.05). The most common genetic profile was aggA-eep-enlA-entL50A/B. E. faecalis from UTI, bacteremia and endodontitis presented different gene combinations. Some of the genes studied were related to their clinical origin. The results obtained in this study are similar to those reported in other countries

    Model of Low-pass Filtering of Local Field Potentials in Brain Tissue

    Full text link
    Local field potentials (LFPs) are routinely measured experimentally in brain tissue, and exhibit strong low-pass frequency filtering properties, with high frequencies (such as action potentials) being visible only at very short distances (≈\approx10~ÎŒm\mu m) from the recording electrode. Understanding this filtering is crucial to relate LFP signals with neuronal activity, but not much is known about the exact mechanisms underlying this low-pass filtering. In this paper, we investigate a possible biophysical mechanism for the low-pass filtering properties of LFPs. We investigate the propagation of electric fields and its frequency dependence close to the current source, i.e. at length scales in the order of average interneuronal distance. We take into account the presence of a high density of cellular membranes around current sources, such as glial cells. By considering them as passive cells, we show that under the influence of the electric source field, they respond by polarisation, i.e., creation of an induced field. Because of the finite velocity of ionic charge movement, this polarization will not be instantaneous. Consequently, the induced electric field will be frequency-dependent, and much reduced for high frequencies. Our model establishes that with respect to frequency attenuation properties, this situation is analogous to an equivalent RC-circuit, or better a system of coupled RC-circuits. We present a number of numerical simulations of induced electric field for biologically realistic values of parameters, and show this frequency filtering effect as well as the attenuation of extracellular potentials with distance. We suggest that induced electric fields in passive cells surrounding neurons is the physical origin of frequency filtering properties of LFPs.Comment: 10 figs, revised tex file and revised fig

    On the uniqueness of the surface sources of evoked potentials

    Full text link
    The uniqueness of a surface density of sources localized inside a spatial region RR and producing a given electric potential distribution in its boundary B0B_0 is revisited. The situation in which RR is filled with various metallic subregions, each one having a definite constant value for the electric conductivity is considered. It is argued that the knowledge of the potential in all B0B_0 fully determines the surface density of sources over a wide class of surfaces supporting them. The class can be defined as a union of an arbitrary but finite number of open or closed surfaces. The only restriction upon them is that no one of the closed surfaces contains inside it another (nesting) of the closed or open surfaces.Comment: 16 pages, 5 figure
    • 

    corecore