New Russulaceae species in south-east Queensland

Russula species are ectomycorrhizal basidiomycetes common throughout Australian woodlands. Molecular and morphological examination of Russula specimens from various sites in South-east Queensland has uncovered a number of phylogenetically diverse and potentially undescribed specimens. At this stage, most of these remain as individual specimens. However, several specimens have been grouped into project species. In this presentation, two potentially new species of Russula will be described. Both species are widespread on red to black clay soils in the Toowoomba region and appear to be phylogenetically related to each other. Project species 1 has a white stipe which developed a pink flush after collection and red to pink centrally depressed cap with white gills. The spores of this species were subglobose, white and ornamented with amyloid warts connected in short chains. The second species, project species 3, is macroscopically similar, differing with its larger size, purple-pink cap colour, and rougher cap texture. Its spores are globose to subglobose, white and ornamented with small amyloid warts connected in short chains. Continued molecular and morphological studies of the Russula species of South-east Queensland may uncover more novel Australian species

Physical fitness components associated with performance in a multiple-sprint test.

PURPOSE: The 5-m repeat-sprint test (5-m RST) measures resistance to fatigue after repeated bouts of short-duration, high-intensity activity. This study determined the components of fitness associated with performance in 5-m RSTs. METHODS: Speed (10-m and 40-m sprints), strength (bench press), agility, strength endurance (pull-ups and push-ups), and aerobic power (20-m shuttle-run test) were measured in male provincial- or national-level rugby (n = 110), hockey (n = 59), and soccer (n = 55) players. RESULTS: Subjects with either high (HI) or low (LO) resistance to fatigue in the 5-m RST differed in body mass (76.9 +/- 11.6 kg vs 102.1 +/- 18.9 kg, HI vs LO, respectively, P < .001), agility (14.55 +/- 0.41 seconds vs 15.56 +/- 0.30 seconds, P < .001), bench press (86 +/- 20 kg vs 114 +/- 33 kg, P = .03), pull-ups (13 +/- 4 vs 8 +/- 5, P = .02), push-ups (56 +/- 12 vs 39 +/- 13, P = .002), and 20-m shuttle-run test (20-m SRT; 133 +/- 11 vs 87 +/- 12 shuttles, P < .001). Body mass, strength, and aerobic power were the best predictors of 5-m RST performance: 5-m RST = -1.274(mass) + 0.756(1RM bench press) + 2.053(number of 20-m SRT shuttles) + 549.409 (R2 = .66). CONCLUSIONS: Performance in the 5-m RST is predicted best by a combination of factors including body mass, strength, and aerobic ability, rather than by any single component of fitness

Exploiting routinely collected severe case data to monitor and predict influenza outbreaks

Abstract Background Influenza remains a significant burden on health systems. Effective responses rely on the timely understanding of the magnitude and the evolution of an outbreak. For monitoring purposes, data on severe cases of influenza in England are reported weekly to Public Health England. These data are both readily available and have the potential to provide valuable information to estimate and predict the key transmission features of seasonal and pandemic influenza. Methods We propose an epidemic model that links the underlying unobserved influenza transmission process to data on severe influenza cases. Within a Bayesian framework, we infer retrospectively the parameters of the epidemic model for each seasonal outbreak from 2012 to 2015, including: the effective reproduction number; the initial susceptibility; the probability of admission to intensive care given infection; and the effect of school closure on transmission. The model is also implemented in real time to assess whether early forecasting of the number of admissions to intensive care is possible. Results Our model of admissions data allows reconstruction of the underlying transmission dynamics revealing: increased transmission during the season 2013/14 and a noticeable effect of the Christmas school holiday on disease spread during seasons 2012/13 and 2014/15. When information on the initial immunity of the population is available, forecasts of the number of admissions to intensive care can be substantially improved. Conclusion Readily available severe case data can be effectively used to estimate epidemiological characteristics and to predict the evolution of an epidemic, crucially allowing real-time monitoring of the transmission and severity of the outbreak

Molecular identification of fungal endophytes in Dipodium roseum roots

Dipodium or hyacinth orchids are large, fleshy, terrestrial orchids commonly seen in summer in Australian woodlands. Most species have limited chlorophyll, appear to be non-photosynthetic and rely on mycorrhizal fungi for their nutrition. Previous molecular investigations of the endophytic fungi of roots of Dipodium variegatum and Dipodium hamiltonianum have shown that the orchids are largely colonised by members of the ectomycorrhizal basidiomycete family, the Russulaceae. The fact that these plants consistently grew close to the base of Eucalyptus and Callitris trees suggested that the orchids acquire carbon and minerals from the tree host via an ectomycorrhizal connection. In the current project the fungal endophytes of Dipodium roseum were investigated for the first time. Orchid roots were sampled from multiple sites over two seasons in southern Queensland, Australia. DNA was extracted from colonised roots and isolated pelotons of the orchid. PCR amplification was conducted using ITS1F and ITS4 primers and following DNA purification, sent for Sanger sequencing at the Australian Genome Research Facility. BLAST searches of returned sequences against the GenBank database revealed a variety of fungi colonising the roots of D. roseum. This included a number of fungi not previously found as root endophytes of Orchidaceae species

Agronomic Management of Indigenous Mycorrhizas

Many of the advantages conferred to plants by arbuscular mycorrhiza (AM) are associated to the ability of AM plants to explore a greater volume of soil through the extraradical mycelium. Sieverding (1991) estimates that for each centimetre of colonized root there is an increase of 15 cm3 on the volume of soil explored, this value can increase to 200 cm3 depending on the circumstances. Due to the enhancement of the volume of soil explored and the ability of the extraradical mycelium to absorb and translocate nutrients to the plant, one of the most obvious and important advantages resulting from mycorrhization is the uptake of nutrients. Among of which the ones that have immobilized forms in soil, such as P, assume particular significance. Besides this, many other benefits are recognized for AM plants (Gupta et al, 2000): water stress alleviation (Augé, 2004; Cho et al, 2006), protection from root pathogens (Graham, 2001), tolerance to toxic heavy metals and phytoremediation (Audet and Charest, 2006; Göhre and Paszkowski, 2006), tolerance to adverse conditions such as very high or low temperature, high salinity (Sannazzaro et al, 2006), high or low pH (Yano and Takaki, 2005) or better performance during transplantation shock (Subhan et al, 1998). The extraradical hyphae also stabilize soil aggregates by both enmeshing soil particles (Miller e Jastrow, 1992) and producing a glycoprotein, golmalin, which may act as a glue-like substance to adhere soil particles together (Wright and Upadhyaya, 1998). Despite the ubiquous distribution of mycorrhizal fungi (Smith and Read, 2000) and only a relative specificity between host plants and fungal isolates (McGonigle and Fitter, 1990), the obligate nature of the symbiosis implies the establishment of a plant propagation system, either under greenhouse conditions or in vitro laboratory propagation. These techniques result in high inoculum production costs, which still remains a serious problem since they are not competitive with production costs of phosphorus fertilizer. Even if farmers understand the significance of sustainable agricultural systems, the reduction of phosphorus inputs by using AM fungal inocula alone cannot be justified except, perhaps, in the case of high value crops (Saioto and Marumoto, 2002). Nurseries, high income horticulture farmers and no-agricultural application such as rehabilitation of degraded or devegetated landscapes are examples of areas where the use of commercial inoculum is current. Another serious problem is quality of commercial available products concerning guarantee of phatogene free content, storage conditions, most effective application methods and what types to use. Besides the information provided by suppliers about its inoculum can be deceiving, as from the usually referred total counts, only a fraction may be effective for a particular plant or in specific soil conditions. Gianinazzi and Vosátka (2004) assume that progress should be made towards registration procedures that stimulate the development of the mycorrhizal industry. Some on-farm inoculum production and application methods have been studied, allowing farmers to produce locally adapted isolates and generate a taxonomically diverse inoculum (Mohandas et al, 2004; Douds et al, 2005). However the inocula produced this way are not readily processed for mechanical application to the fields, being an obstacle to the utilization in large scale agriculture, especially row crops, moreover it would represent an additional mechanical operation with the corresponding economic and soil compaction costs. It is well recognized that inoculation of AM fungi has a potential significance in not only sustainable crop production, but also environmental conservation. However, the status quo of inoculation is far from practical technology that can be widely used in the field. Together a further basic understanding of the biology and diversity of AM fungi is needed (Abbott at al, 1995; Saito and Marumoto, 2002). Advances in ecology during the past decade have led to a much more detailed understanding of the potential negative consequences of species introductions and the potential for negative ecological consequences of invasions by mycorrhizal fungi is poorly understood. Schwartz et al, (2006) recommend that a careful assessment documenting the need for inoculation, and the likelihood of success, should be conducted prior to inoculation because inoculations are not universally beneficial. Agricultural practices such as crop rotation, tillage, weed control and fertilizer apllication all produce changes in the chemical, physical and biological soil variables and affect the ecological niches available for occupancy by the soil biota, influencing in different ways the symbiosis performance and consequently the inoculum development, shaping changes and upset balance of native populations. The molecular biology tools developed in the latest years have been very important for our perception of these changes, ensuing awareness of management choice implications in AM development. In this context, for extensive farming systems and regarding environmental and economic costs, the identification of agronomic management practices that allow controlled manipulation of the fungal community and capitalization of AM mutualistic effect making use of local inoculum, seem to be a wise option for mycorrhiza promotion and development of sustainable crop production

Severe respiratory illness caused by a novel coronavirus, in a patient transferred to the United Kingdom from the Middle East, September 2012

Coronaviruses have the potential to cause severe transmissible human disease, as demonstrated by the severe acute respiratory syndrome (SARS) outbreak of 2003. We describe here the clinical and virological features of a novel coronavirus infection causing severe respiratory illness in a patient transferred to London, United Kingdom, from the Gulf region of the Middle East

Attentional and visual demands for sprint performance in non-fatigued and fatigued conditions: reliability of a repeated sprint test

Background: Physical performance measures are widely used to assess physical function, providing information about physiological and biomechanical aspects of motor performance. However they do not provide insight into the attentional and visual demands for motor performance. A figure-of-eight sprint test was therefore developed to measure the attentional and visual demands for repeated-sprint performance. The aims of the study were: 1) to assess test-retest reliability of the figure-of-eight sprint test, and 2) to study the attentional and visual demands for sprint performance in a non-fatigued and fatigued condition. Methods: Twenty-seven healthy athletes were included in the study. To determine test-retest reliability, a subgroup of 19 athletes performed the figure-of-eight sprint test twice. The figure-of-eight sprint test consisted of nine 30-second sprints. The sprint test consisted of three test parts: sprinting without any restriction, with an attention-demanding task, and with restricted vision. Increases in sprint times with the attention-demanding task or restricted vision are reflective of the attentional and visual demands for sprinting. Intraclass correlation coefficients (ICCs) and mean difference between test and retest with 95% confidence limits (CL) were used to assess test-retest reliability. Repeated-measures ANOVA were used for comparisons between the sprint times and fatigue measurements of the test parts in both a non-fatigued and fatigued condition. Results: The figure-of-eight sprint test showed good test-retest reliability, with ICCs ranging from 0.75 to 0.94 (95% CL: 0.40-0.98). Zero lay within the 95% CL of the mean differences, indicating that no bias existed between sprint performance at test and retest. Sprint times during the test parts with attention-demanding task (P = 0.01) and restricted vision (P < 0.001) increased significantly compared to the base measurement. Furthermore the sprint times and fatigue measurements increased significantly in fatigued condition. There was a significant interaction effect between test part and level of fatigue (P = 0.03). Conclusions: High ICCs and the absence of systematic variation indicate good test-retest reliability of the figure-of-eight sprint test. The attentional and visual demands for sprint performance, in both a non-fatigued and fatigued condition, can be measured in healthy team-sport athletes with the figure-of-eight sprint test

Optical imaging of the peri-tumoral inflammatory response in breast cancer

<p>Abstract</p> <p>Purpose</p> <p>Peri-tumoral inflammation is a common tumor response that plays a central role in tumor invasion and metastasis, and inflammatory cell recruitment is essential to this process. The purpose of this study was to determine whether injected fluorescently-labeled monocytes accumulate within murine breast tumors and are visible with optical imaging.</p> <p>Materials and methods</p> <p>Murine monocytes were labeled with the fluorescent dye DiD and subsequently injected intravenously into 6 transgenic MMTV-PymT tumor-bearing mice and 6 FVB/n control mice without tumors. Optical imaging (OI) was performed before and after cell injection. Ratios of post-injection to pre-injection fluorescent signal intensity of the tumors (MMTV-PymT mice) and mammary tissue (FVB/n controls) were calculated and statistically compared.</p> <p>Results</p> <p>MMTV-PymT breast tumors had an average post/pre signal intensity ratio of 1.8+/- 0.2 (range 1.1-2.7). Control mammary tissue had an average post/pre signal intensity ratio of 1.1 +/- 0.1 (range, 0.4 to 1.4). The p-value for the difference between the ratios was less than 0.05. Confocal fluorescence microscopy confirmed the presence of DiD-labeled cells within the breast tumors.</p> <p>Conclusion</p> <p>Murine monocytes accumulate at the site of breast cancer development in this transgenic model, providing evidence that peri-tumoral inflammatory cell recruitment can be evaluated non-invasively using optical imaging.</p