Three dimensional corrugated organic photovoltaics for building integration; improving the efficiency, oblique angle and diffuse performance of solar cells

The lamination of OPV modules to corrugated roof cladding has been undertaken. The 3-dimensional form of the cladding provides three advantages for outdoor OPV deployment; firstly the ‘footprint’ of the solar cell is reduced, which leads to ∼10% improved power conversion (PCE) efficiency per unit area. Secondly, the oblique angle performance is enhanced, leading to increased output in the early morning and evening. Indoor characterisation showed a 9-fold enhancement in efficiency was obtainable, when compared to a flat module. Thirdly, an improvement in performance under diffuse lighting conditions was measured, when compared to a flat module. The average daily yield of the 3D module was 17–29% higher than a flat module, with higher relative enhancements observed on cloudier days. Geographically, the 3D module appears to be well-suited to countries with a high latitude, due to the enhanced diffuse light levels and the fact that tilting the module in both ‘latitude’ and ‘longitude’ directions away from normal, leads to the best achievable enhancement in solar cell performance. The approach set out in this paper could yield a product that has profound advantages over existing BIPV products and is potentially applicable to other flexible inorganic solar cell technologies

Assessment of Phosphorus Input from Urban Areas in the Passaúna River and Reservoir

Elevated phosphorus loads play an important role in the deterioration of water quality and can subsequently pose a threat to the aquatic organisms in a river or a standing water body. The accurate assessment of total phosphorus (TP) fluxes from a catchment is of high importance to the well-being of the entire river ecosystem. In this study, we assessed the yearly input of TP from the urban areas of the Passaúna catchment in southern Brazil. The catchment drains into the eponymous reservoir, which provides drinking water for more than 800,000 inhabitants of the Curitiba Metropolitan region. The protection of the water quality in the river as well as in the reservoir is of paramount importance, yet high phosphorous inputs have been detected. For adequate protection, the catchment emissions need to be accurately assessed. Initially, the TP concentration in the river sediment was determined in order to assess the relationship between the TP export of the urban areas and the TP stock of the river. It was found that in areas with a higher share of urban land cover and especially in areas with a lack of sewage treatment, the TP concentration in the sediment reached up to 6700 mg/kg. The assessment of the overall TP input from urban areas was based on a regionalized emission-modeling approach, combined with data from long-term water quality monitoring of the river. The monitoring station established upstream of the Passaúna Reservoir inflow provided an initial assessment and the necessary output for the validation and calibration of the model. From the drainage basin of the monitoring station, an overall TP input of 2501 kg/a (0.31 kg/(ha a)) was measured between 1 May 2018 and 1 May 2019 (3508 kg TP/a or 0.23 kg/(ha a) when extrapolating the overall catchment of the Passaúna Reservoir). The monitoring data indicated that the TP input increases during the wet months of the year. The sediment stock of the river also plays an important role in the interannual budget of TP. During the timespan of one year, many deposition–resuspension events happen. The resuspended material is included in the baseflow and hinders the differentiation between urban and nonurban input. After calibration, the model was able to predict the yearly input of TP from the urban areas of the Passaúna catchment. In addition, the share of inhabitants who are not connected to the sewer system was assessed. Overall, the combination of monitoring and modeling in this study offers a valuable overview of the TP dynamics of the system, while the model ensures reproducibility with high accuracy at the same time

Conditions for efficient charge generation preceded by energy transfer process in non-fullerene organic solar cells

The minimum driving force strategy is applied to promote the exciton dissociation in organic solar cells (OSCs) without significant loss of open-circuit voltage. However, this strategy tends to promote F\"orster resonance energy transfer (FRET) from the donor to the acceptor (D-A), a consequence generally ignored until recently. In spite of the advances reported on this topic, the correlation between charge-transfer (CT) state binding energy and driving force remains unclear, especially in the presence of D-A FRET. To address this question, we employ a kinetic approach to model the charge separation in ten different D/A blends using non-fullerene acceptors. The model considers the influence of FRET on photoluminescence (PL) quenching efficiency. It successfully predicts the measured PL quenching efficiency for D or A photoexcitation in those blends, including the ones for which the D-A FRET process is relevant. Furthermore, the application of the model allows to quantifying the fractions of quenching loss associated with charge transfer and energy transfer. Fundamental relationships that controls the exciton dissociation was derived evidencing the key roles played by the Marcus inverted regime, exciton lifetime and mainly by the correlation between the driving force and binding energy of CT state. Based on those findings, we propose some strategies to maximize the quenching efficiency and minimize energy loss of OSCs in the presence of D-A FRET.Comment: 44 pages, 10 figures, 3 table

Comparing C-60 and C-70 as acceptor in organic solar cells : Influence of the electronic structure and aggregation size on the photovoltaic characteristics

The difference in aggregation size of the C-60 and C-70 fullerenes affect the photovoltaic performance of devices assembled in the so-called bilayer architecture with poly [2,7-(9,9- dioctyl- dibenzosilole)- alt-4,7- bis(thiophen-2-yl)benzo- 2,1,3- thiadiazole] (PSiF-DBT) as the electron donor material. Despite the better performance of the C-70 devices, which is related to the high absorption coefficient in the visible range and the superior charge transport properties, the short-circuit current variation upon annealing treatment at 100 degrees C is approximately twice bigger when the C-60 is the acceptor. We attribute this effect to the tendency of C-60 in form smaller aggregate domains relatively to the C-70. The increased roughness on the polymeric surface after annealing results in an enhanced donor/acceptor contact area and assists the fullerene diffusion deeper inside the polymeric layer. This effect leads to a better mixing between donor and acceptor species and create a interpenetrating layer close to the so-called bulk heterojunction. Since C-60 forms smaller aggregates, this mechanism is more pronounced for this molecule. Therefore, a significant variation in the performance of the C-60 devices is observed after this kind of treatment. Density Functional Theory calculations of the potential energy of interaction between two fullerene molecules and X-Ray measurements gives evidences to support this idea. In addition, combining spectrally resolved external quantum efficiency measurements with optical modeling our results also indicate the occurrence of the bilayer interfacial mixing for PSiF-DBT/C-60.Peer reviewe

Estudo do comportamento alimentar do pulgão-verde-do morangueiro pela técnica de Electrical Penetretion Graph (EPG).

Resumo

Manual therapy for chronic migraine: a pragmatic randomised controlled trial study protocol

Introduction Chronic migraine is a largely refractory condition affecting between 1 and 2.2% of the overall population worldwide, with females more affected than males. There are also high health and socioeconomic costs associated both for the individual and society. The mainstay of chronic migraine management is pharmacological, but the options available have limited efficacy and there are often unwanted side effects. There is some evidence for manual therapy as a treatment option for migraine, but its effectiveness for chronic migraine is unknown. Therefore, we have designed a pragmatic randomised control trial to investigate whether adding manual therapy to the tertiary specialist treatment of chronic migraine improves patient-reported outcomes. Methods A pragmatic, randomised controlled trial in a hospital tertiary headache clinic. Participants will be randomised into one of two groups: treatment as usual or treatment as usual plus manual therapy. The primary outcome measure will be a change in the Headache Impact Test score. Secondary outcomes will also be measured over the 12-week study period including changes in headache frequency, migraine specific quality of life and reductions in relevant medicine consumption. The manual therapy group will have five treatment sessions each lasting 30 min. The recruitment target of 64 participants will allow power at 80% with p = 0.05 using minimal clinical difference for Headache Impact Test of 3.7 and includes provision for a 10% dropout rate. Recruitment will take place between August 2018 and February 2019. The results will form part of a doctoral study and be published in peer-reviewed journals and presented at national/international conferences. Discussion Current pharmacological approaches have limited effects in the management of chronic migraine and there is a requirement to improve treatment options and reduce the health and economic burden of the condition. Manual therapy has been shown to be effective in other chronic pain conditions as well as other primary headaches. This study will explore the effectiveness of manual therapy as an adjunctive approach to the management of chronic migraine. Trial registration The trial has received a favourable opinion from the UK Health Research Authority (IRAS 228901) and is registered at ClinicalTrials.gov.number NCT03395457. Registered 1st March 2018