Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718

The hot deformation behavior of an IN718 superalloy was studied by isothermal compression tests under the deformation temperature range of 950–1100 °C and strain rate range of 0.001–1 s-1 up to true strains of 0.05, 0.2, 0.4 and 0.7. Electron backscattered diffraction (EBSD) technique was employed to investigate systematically the effects of strain, strain rate and deformation temperature on the subgrain structures, local and cumulative misorientations and twinning phenomena. The results showed that the occurrence of dynamic recrystallization (DRX) is promoted by increasing strain and deformation temperature and decreasing strain rate. The microstructural changes showed that discontinuous dynamic recrystallization (DDRX), characterized by grain boundary bulging, is the dominant nucleation mechanism in the early stages of deformation in which DRX nucleation occurs by twining behind the bulged areas. Twin boundaries of nuclei lost their ¿3 character with further deformation. However, many simple and multiple twins can be also regenerated during the growth of grains. The results showed that continuous dynamic recrystallization (CDRX) is promoted at higher strains and large strain rates, and lower temperatures, indicating that under certain conditions both DDRX and CDRX can occur simultaneously during the hot deformation of IN718.Peer ReviewedPostprint (author's final draft

Hygrothermomagnetoelectroelastic analysis of a functionally graded magnetoelectroelastic hollow sphere resting on an elastic foundation

Static behavior of a functionally graded magnetoelectroelastic hollow sphere subjected to hygrothermal loading in the spherically symmetric state is studied. The sphere could be rested on a Winkler elastic foundation on the inner and/or outer surfaces. It is assumed that the material properties obey a power law in the radial direction. Considering the axisymmetric heat conduction and moisture diffusion equations, temperature and moisture concentration distributions within the radius of the sphere are achieved. The governing coupled differential equations are exactly solved. Numerical examples are discussed in detail to show the significant influences of inhomogeneity index, hygrothermal loading, elastic foundation and electromagnetic boundary conditions on the static behavior of a functionally graded magnetoelectroelastic hollow sphere

Influence of heat treatment on properties of hot isostatically pressed turbine blade superalloy IN738

Impact of heat treatment on hot isostatically pressed (HIP) Ni-base superalloy has been investigated before and after conducting HIP process. HIP was performed by applying a stress of 120 MPa at a temperature of 1200 °C for 2 hours under argon atmosphere followed by furnace cooling to room temperature. Heat treatment cycle was conducted on the samples according to GEB50A563. Microstructural observation demonstrated the deleterious change of ?' morphology after HIP process which causes to decrease of hardness and creep strength. However, pre heat treatment in compared with cast specimen show slight changes in microstructure but, post heat treatment can revert this change of ?' morphology completely and also increase the mechanical properties

Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 718

The hot deformation behavior of an IN718 superalloy was studied by isothermal compression tests under the deformation temperature range of 950–1100 °C and strain rate range of 0.001–1 s-1 up to true strains of 0.05, 0.2, 0.4 and 0.7. Electron backscattered diffraction (EBSD) technique was employed to investigate systematically the effects of strain, strain rate and deformation temperature on the subgrain structures, local and cumulative misorientations and twinning phenomena. The results showed that the occurrence of dynamic recrystallization (DRX) is promoted by increasing strain and deformation temperature and decreasing strain rate. The microstructural changes showed that discontinuous dynamic recrystallization (DDRX), characterized by grain boundary bulging, is the dominant nucleation mechanism in the early stages of deformation in which DRX nucleation occurs by twining behind the bulged areas. Twin boundaries of nuclei lost their ¿3 character with further deformation. However, many simple and multiple twins can be also regenerated during the growth of grains. The results showed that continuous dynamic recrystallization (CDRX) is promoted at higher strains and large strain rates, and lower temperatures, indicating that under certain conditions both DDRX and CDRX can occur simultaneously during the hot deformation of IN718.Peer Reviewe