Implementasi Kebijakan Pelayanan Kesehatan Bersubsidi di Puskesmas Salo Kecamatan Watang Sawitto Kabupaten Pinrang

: The aim of this research was to know and to analize how far public perceptions of subsidized health care policy implementation (Jamkesda) in Public Health Center (Puskesmas) Salo Watang Sawitto Distric Pinrang Regency and the factors that affect its. In terms of academic research is expected benefit to the development of the science of government. The results showed that the public perception of subsidized health care (Jamkesda) policy implementation has gone well, it's based on the average scores of each variable are: the rate of experience, of feelings, of needs. Subsidized health care policy implementation was supported by several factors: 1) resources, 2) Disposition, 3) Bureaucracy structure. Based on the results of linear regression showed that the public perception influence 76.8% against subsidized health care policy (Jamkesda) implementation

THERMAL EXPANSION BEHAVIOR OF THE Ba0.2Sr0.8Co0.8Fe0.2O3−δ (BSCF) WITH Sm0.2Ce0.8O1.9

Nanostructured perovskite oxides of Ba0.2Sr0.8Co0.8Fe0.2O3−δ (BSCF) were synthesized through the co-precipitation method. The thermal decomposition, phase formation and thermal expansion behavior of BSCF were characterized by thermogravimetric analysis, X-ray diffraction (XRD), and dilatometry, respectively. XRD peaks were indexed to a cubic perovskite structure with a Pm3m (221) space group. All the combined oxides produced the desired perovskite-phase BSCF. The microstructures were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The TEM analysis showed that BSCF powders had uniform nanoparticle sizes and high homogeneity. The cross-sectional SEM micrograph of BSCF exhibited a continuous and no delaminated layer from the electrolyte-supported cell. The thermal expansion coefficient (TEC) of BSCF was 16.2×10-6 K-1 at a temperature range of 600°C to 800°C. Additional experiments showed that the TEC of BSCF is comparable to that of Sm0.2Ce0.8O1.9 (SDC) within the same temperature range. The results demonstrate that BSFC is a promising cathode material for intermediate-temperature solid-oxide fuel cells

Pemanfaatan Lempung Desa Gema Teraktivasi H2so4 Untuk Peningkatan Mutu Minyak Goreng Curah

Clay from Gema Village, Kampar Regency, Riau Province has been applied as an adsorbent. The increase of clay\u27s adsortive capacity can be done by modification. This study was aimed to use the activated clay to improve the quality of bulk cooking oil. The adsorbent preparation was began with activation process by using 0,5 M H2SO4, for 3 hours, and stirring rate 500 rpm. Activated clay showed the increase the intensity of quartz and montmorillonit, and accompanied by the loss of muscovite and kaolinite. The parameters that were used in this study were peroxide value, acid value, water content, odor, and colour. Adsorption process was observed in 7 gram activated clay with various contact time (30, 60, 90, and 120 minutes), the results then compared with SNI 3741:2013. The obtained result showed that the activated clay 0,5 M H2SO4 was able to decrease the acid value, and water content, respectively 54,55%, 48,75% with 120 minute and 7 gram weight of activated clay, it was also able to decrease peroxide value 39,64% with 60 minute and 7 gram weight of activated clay, and the color of bulk cooking oil was more clear, but it\u27s smells like clay

Mobile ad hoc network testbed using mobile robot technology

MANET (Mobile Ad Hoc Network) researchers have shown increased interest in using mobile robot technology for their testbed platforms. Thus, the main motivation of this paper is to review various robot-based MANET testbeds that have been developed in previously reported research. Additionally, suggestions to heighten mobility mechanisms by using mobile robots to be more practical, easy and inexpensive are also included in this paper, as we unveils ToMRobot, a low-cost MANET robot created from an ordinary remote control car that is capable of performing a real system MANET testbed with the addition of only a few low-cost electronic components. Despite greatly reduced costs, the ToMRobot does not sacrifice any of the necessary MANET basic structures and will still be easily customizable and upgradeable through the use of open hardware technology like Cubieboard2 and Arduino, as its robot controller. This paper will also include guidelines to enable technically limited MANET researchers to design and develop the ToMRobot. It is hoped that this paper achieves its two pronged objectives namely (i) to facilitate other MANET researchers by providing them with a source of reference that eases their decision making for selecting the best and most suitable MANET mobile robots for real mobility in their MANET testbeds (ii) to provide MANET researchers with a prospect of building their own MANET robots that can be applied in their own MANET testbed in the future

Uji Toleransi Beberapa Varietas Padi ( Oryza Sativa L. ) Terhadap Naungan

Penelitian ini bertujuan untuk mengetahui uji toleransi beberapa varietas padi (Oriza sativa L) terhadap variasi intensitas penyinaran. Penelitian ini dilaksanakan bulan November 2014 sampai dengan bulan Februari 2015. diKebun Percobaan Pasar Miring, Balai Pengkajian Teknologi Pertanian (BPTP) Sumatera Utara. Jl. Raya-Galang Km 8,2 Lubuk Pakam, Kec. Pagar Merbau, Kab. Deli Serdang, Sumatera Utara. Rancangan yang digunakan dalam penelitian adalah Rancangan Petak Terbagi (RPT) dengan 2 faktor, yaitu: yang pertama faktor Naungan (N) sebagai petak utama dengan 3 taraf yaitu: N0 = tanpa naungan (100% intensitas penyinaran), N1= dinaungi 25% (75% intensitas penyinaran), N2 = dinaungi 50% (50% intensitas penyinaran). Yang kedua faktor varietas padi (V) sebagai anak petak dengan 5 taraf yaitu : V1= varietas Sidenuk, V2= varietas Ciherang, V3= varietas Inpari 10, V4= varietas Inpari 30 dan V5= varietas Mugibat. Jumlah kombinasi perlakuan 15 kombinasi yang diulang sebayak 3 kali menghasilkan 45 satuan percobaan, jumlah tanaman per plot 40 tanaman dengan 10 tanaman sampel, jumlah tanaman keseluruhan adalah 1800 tanaman dengan jumlah sampel seluruhnya 450 tanaman. Hasil penelitian menunjukkan bahwa perlakuan intensitas penyinaran (naungan) berpengaruh nyata terhadap parameter tinggi tanaman 14 MST, jumlah anakan, jumlah anakan produktif, jumlah gabah berisi per malai, berat gabah kering per plot dan berat gabah kering per Ha. Sedangkan parameter tinggi tanaman 2, 4 dan 6 MST, panjang malai, jumlah gabah per malai, jumlah gabah hampa per malai, berat gabah 1000 biji, kandungan klorofil A, kandungan klorofil B, kandungan klorofil Total tidak berpengaruh yang nyata. Pada perlakuan varietas berpengaruh nyata terhadap parameter tinggi tanaman, jumlah anakan, jumlah anakan produktif, jumlah gabah per malai, jumlah gabah berisi per malai, sedangkan terhadap panjang malai, jumlah gabah hampa per malai, berat gabah 1000 biji, kandungan klorofil A, kandungan klorofil B, kandungan klorofil Total, berat gabah kering per plot, berat gabah kering per Ha, penggunaan varietas tidak memberikan perbedaan yang nyata. Interaksi varietas dan intensitas penyinaran memberi pengaruh yang nyata terhadap jumlah anakan dan jumlah anakan produktif. Sedangkan parameter tinggi tanaman, jumlah gabah per malai, jumlah gabah berisi per malai, panjang malai, jumlah gabah hampa per malai, kandungan klorofil A, kandungan klorofil B, kandungan klorofil Total, berat gabah 1000 butir, berat gabah kering per plot dan berat gabah kering per Ha tidak memberikan perbedaan yang nyata

Similarity Based Entropy on Feature Selection for High Dimensional Data Classification

Curse of dimensionality is a major problem in most classification tasks. Feature transformation and feature selection as a feature reduction method can be applied to overcome this problem. Despite of its good performance, feature transformation is not easily interpretable because the physical meaning of the original features cannot be retrieved. On the other side, feature selection with its simple computational process is able to reduce unwanted features and visualize the data to facilitate data understanding. We propose a new feature selection method using similarity based entropy to overcome the high dimensional data problem. Using 6 datasets with high dimensional feature, we have computed the similarity between feature vector and class vector. Then we find the maximum similarity that can be used for calculating the entropy values of each feature. The selected features are features that having higher entropy than mean entropy of overall features. The fuzzy k-NN classifier was implemented to evaluate the selected features. The experiment result shows that proposed method is able to deal with high dimensional data problem with average accuracy of 80.5%

Studi Eksperimental Pengaruh Konfigurasi Sengkang Pada Daerah Tekan Balok Beton Serat Bertulang

Concrete has relatively high compressive strength, in other hand higher concrete compression give more brittle of failure. There are several methods for improvement such as addition steel-fiber in concrete mix and confinement in the compression zone. This study present a further study on the influence of addition 0.5% steel-fiber of concrete volume to concrete mix and three specimen fiber concrete beams ware evaluated with three stirrup configuration (BF1, BF4, BF5) that concentrated in the compression zone. The study's analyze using a pure beding test with 2 point load of a simply supported beam. The variation of stirrup configuration concentrated at pure beding moment zone of beam. The result of this study, the addition of steel-fibers to the concrete mix increased the cylinder compression strength by 11,96%, The moment capacity of BF4 increased by 0,96% compered to BF1 in other hand the specimen BF5 reduce by 4,1% compered to BF1 ,The Stiffnes of BF4 increased 132,64% and BF5 increased by 25,44% compared to BF1,The Ductility of specimen BF4 increased by 148,01% and BF5 increased by 3.97% compared to BF1

Ketahanan Genotipe Kedelai terhadap Kekeringan dan Kemasaman, Hasil Induksi Mutasi dengan Sinar Gamma

The study aimed to classify soybean genotypes that are tolerant, moderate and sensitive to drought and acidity. The results are expected to give a contribution in the development of Soyban on dry land and acid soil. Increasing of genetic diversity was carried out through mutation induction by gamma ray in soybean seeds. The experiment was conducted in green house by using the method in the form of a two-factor factorial design laid out in the draft group. The first factor was the variety (V) which consisted of three kinds, namely soybean Menyapa varieties (v1), Orba (v2), and Tanggamus (v3). The second factor was the dose of gamma-ray irradiation (D) consisted of 4 doses of 0 Gy (d0), 25 Gy (d1), 50 Gy (d2), and 75 Gy (d3) at concentrations of PEG and Al which showed that the level of diversity the biggest concentration of 30 previous trials of PEG+10 ppm Al. The volume of nutrient solution (Hoagland's) maintained in accordance with the initial volume by adding distilled water, and the solution was maintained at pH 4 using NaOH and HCl 1N. The results showed that the grouping was based on drought tolerant and acidity as follows: genotypes tolerant were varieties Menyapa 50 Gy gamma irradiation, variety of Orba 25 Gy of gamma irradiation, gamma irradiation variety Tanggamus 0 Gy, 25 Gy, 50 Gy of gamma iradiation. Moderate genotype were varieties Menyapa 75 Gy of gamma irradiation, variety Orba 50 Gy, 75 Gy of gamma irradiation, variety Tanggamus 75 Gy of gamma irradiation; genotype susceptible were variety Menyapa 0 Gy, 25 Gy of gamma irradiation; variety Orba without gamma irradiation of 0 Gy

Scattering from supramacromolecular structures

We study theoretically the scattering imprint of a number of branched supramacromolecular architectures, namely, polydisperse stars and dendrimeric, hyperbranched structures. We show that polydispersity and nature of branching highly influence the intermediate wavevector region of the scattering structure factor, thus providing insight into the morphology of different aggregates formed in polymer solutions.Comment: 20 pages, 8 figures To appear in PR

Catalytic Performance of Calcium-Lanthanum co-doped Ceria (Ce0.85-xLa0.15CaxO2-δ) in Partial Oxidation of Methane

In this study, Ce0.85-xLa0.15CaxO2-δ was synthesized using sol-gel combustion method and appliedfor partial oxidation of methane (POM). The physicochemical properties of catalyst were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and thermogravimetric analysis (TGA). Material shows a pure cubical structure and is highly stable up to 850 °C. The performance testing indicated the conversion of CH4 is 65% and selectivity of H2 and CO are 28% and 8%, respectively. The performance indicated the catalyst has a potential to be used for partial oxidation of methane on a larger scale. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).