478 research outputs found
Microstructure research - Material engineering - New surfaces: a short overview of our research topics at the Institute for Functional Materials and the Material Engineering Center Saarland
Development and Validation of a Calculation Routine for the Precise Determination of Pulse Overlap and Accumulated Fluence in Pulsed Laser Surface Treatment
In laser material processing, a variety of parameters like pulse fluence, total dose,
step size, and pulse-to-pulse overlap are used to define and compare laser
processes. Of these parameters, the pulse-to-pulse overlap can be the hardest to
access as it is not implemented directly but instead depends on the spot
diameter, its shape, and the respective scanning path that is used to cover the
surface. This article shows that existing calculation routes overestimate the
actual overlap by up to 21%. A novel calculation route is developed that greatly
facilitates the determination of the pulse overlap and thereby the average number
of laser pulses that interact with a given point on the surface. This approach
makes it possible to achieve more reliable and comparable laser processes, which
in return leads to better control of the procedure as the effect of individual
parameters on a given output can be determined with greater precision
Shape analysis and classification of irregular graphite morphology in cast iron
Die Unterscheidung der verschiedenen Graphitmorphologien in Gusseisen erfolgte bisher im Wesentlichen qualitativ durch subjektiven Vergleich mit Richtreihenbildern. In Hochleistungsanwendungen im Motorenbau werden nunmehr objektive quantitative Messungen der jeweiligen Graphitanteile benötigt, damit die mechanischen Eigenschaften reproduzierbar erreicht werden können.
Vorgestellt werden bildanalytische Untersuchungen zur automatischen Klassifizierung von Lamellen-, Vermikular- und Kugelgraphitformen, sowie Graphitformen in Temperguss. Dabei wurden insbesondere teilchenbasierte Meßmethoden angewendet. Unterschiedliche Formparameter wurden in dieser Arbeit zusammengefasst, und ihre Relevanz für die Charakterisierung und Klassifizierung irregulärer, komplexer Graphitteilchen in Gusseisen wurde bestimmt. Es zeigte sich, dass die Kombination der Formparameter Rundheit und Kompaktheit die präziseste Klassifizierung liefert. Ein Klassifizierungsalgorithmus wurde mit Berücksichtigung der Abhängigkeit der Formparameter von der Teilchengröße entwickelt. Die traditionelle subjektive Analyse der Gusseisengefüge anhand EN ISO 945 kann durch die Anwendung der neu vorgeschlagenen Methode mit einer automatischen reproduzierbaren Graphitformcharakterisierung und Klassifizierung deutlich verbessert werden
Neue Möglichkeiten der objektiven Graphitklassifizierung in Gusseisen durch Nano-Tomographie und internetbasierte Online-Verfahren
Gusseisen spielt eine wichtige Rolle als Konstruktionswerkstoff auch bei Hochleistungsanwendungen,wenn man in der Lage ist, die Ausbildung der Graphitmorphologie zu beherrschen. Dabei unterscheidet man nach DIN EN ISO 945 sechs Typen von Graphitausbildungen die in Gusseisen vorkommen. Diese unterscheiden sich nicht nur in der Form und Anordnung der jeweiligen Graphiteinlagerungen voneinander, sie differieren auch grundlegend bezüglich ihrer mechanischen und physikalischen Eigenschaften. Da die traditionelle Begutachtung der Graphitmorphologie nach Richtreihenbildern nur qualitativ ist und einen breiten subjektiven Interpretationsspielraum zulässt, erfordern Entwicklung und Einsatz von "maßgeschneiderten" Gefügen im Gusseisen auch objektive und quantifizierbare automatische Klassifikationsverfahren.
Eine 2D-Formanalyse der Graphiteinschlüsse über die konventionellen Verfahren der quantitativen Gefügeanalyse ermöglicht die Auswahl der gefügecharakteristischen Parameter für die reproduzierbare Graphitklassifizierung. Mit Hilfe von 3D-Untersuchungen der realen Graphitmorphologie mittels FIB-Nanotomographie und der Simulation möglicher 2D-Schnitte konnten erstmals die objektiven Grenzen der bildanalytischen 2D-Klassifizierung beurteilt werden. Auf dieser Basis konnten auch diejenigen bildanalytischen Messgrößen ermittelt werden, die eine Klassifizierung der Graphitmorphologie optimieren können.
Auf dieser Basis wurde ein internetbasiertes Klassifizierungsverfahren entwickelt (www.materialography.net), das mit Hilfe des Stützvektorverfahrens diese Vielzahl bildanalytischer Messgrößen gleichzeitig in die Klassifizierung einbezieht und eine nachprüfbar hohe Klassifikationsgüte der komplexen Graphitteilchen in Gusseisen durch Angabe der Wahrscheinlichkeiten für die jeweilige Zuordnung gewährleistet
Carbon Nanotube (CNT)-Reinforced Metal Matrix Bulk Composites: Manufacturing and Evaluation
This chapter deals with the blending and processing methods of CNT-reinforced metal matrix bulk composites (Al/CNT, Cu/CNT and Ni/CNT) in terms of solid-state processing, referring mainly to the research works of the last ten years in this research field. The main methods are depicted in a brief way, and the pros and cons of each method are discussed. Furthermore, a tabular summary of the research work of the mentioned three systems is given, including the blending methods, sintering methods, the used amount of CNTs and the finally achieved relative density of the composite. Finally, a brief discussion of each system is attached, which deals with the distribution and interaction of the CNTs with the matrix material
Objective homogeneity quantification of a periodic surface using the Gini coefficient
The significance of periodic surface structuring methods, such as direct laser interference patterning, is growing steadily. Thus, the ability to objectively and consistently evaluate these surfaces is increasingly important. Standard parameters such as surface roughness or the arithmetic average height are meant to quantify the deviation of a real surface from an ideally flat one. Periodically patterned surfaces, however, are an intentional deviation from that ideal. Therefore, their surface profile has to be separated into a periodic and a non-periodic part. The latter can then be analyzed using the established surface parameters and the periodic nature allows a quantification of structure homogeneity, e.g. based on Gini coefficient. This work presents a new combination of established methods to reliably and objectively evaluate periodic surface quality. For this purpose, the periodicity of a given surface is extracted by Fourier analysis, and its homogeneity with respect to a particular property is determined for the repeating element via a Gini analysis. The proposed method provides an objective and reliable instrument for evaluating the surface quality for the selected attribute regardless of the user. Additionally, this technique can potentially be used to both identify a suitable surface structuring technique and determine the optimal process parameters
Electrical Characterization of Carbon Nanotube Reinforced Silver and Copper Composites for Switching Contacts
Carbon nanotube (CNT)-reinforced silver and copper metal matrix composites—at three
different reinforcement phase concentrations (0.5 wt.%, 0.75 wt.%, and 1 wt.%)—were produced via
powder metallurgy and sintered via hot uniaxial pressing. Optical and electron microscopy techniques
were used to characterize the powder mixtures and sintered composites. The latter were also
electrically characterized via load-dependent electrical contact resistance (ECR) and surface fatigue
tests. Particle size and morphology play a crucial role in CNT deposition onto the metallic powder.
CNT were deposited exceptionally well onto the dendritic copper powder regardless of its larger size
(compared with the silver flakes) due to the higher surface area caused by the grooves and edges
of the dendritic structures. The addition of CNT to the metallic matrices improved their electrical
performance, in general outperforming the reference material. Higher CNT concentrations produced
consistently low ECR values. In addition, high CNT concentrations (i.e., 1 wt.%) show exceptional
contact repeatability due to the elastic restitutive properties of the CNT. The reproducibility of
the contact surface was further evaluated by the fatigue tests, where the composites also showed
lower ECR than the reference material, rapidly reaching steady-state ECR within the 20 fatigue
cycles analyzed
Wear Reduction via CNT Coatings in Electrical Contacts Subjected to Fretting
Carbon nanotubes (CNT) are of great interest to the research community due to their outstanding mechanical, transport,
and optical properties. These nanoparticles have also shown exceptional lubricating capabilities, which coupled with their
electrical conductivity show promising results as solid lubricants in electrical contacts. In this study, three diferent CNT
coatings were deposited over copper platelets via electrophoretic deposition and subsequently tribo-electrically characterized
including electrical contact resistance evolution during fretting wear, wear protection, chemical analysis of fretting marks,
as well as infuence of CNT coating thickness, duration and normal load applied during fretting, and atmospheric humidity.
Thicker CNT coatings show improved wear protection while retaining similar electrical behavior as uncoated copper, or
even improving its electrical contact resistance. Moreover, the compaction of the porous CNT coating is crucial for optimal
electrical performance at low humidity. For longer fretting tests (150,000 and 500,000 cycles), the coatings are displaced
thus afecting the wear protection ofered. However, the coatings stabilize and reduce ECR compared to uncoated samples.
Furthermore, thicker CNT coatings can bear higher loads during fretting due to the increased lubricant reservoir, with carbonaceous triboflm remaining at the contacting interface after 5,000 fretting cycles regardless of normal load
Direct laser interference patterning for photocatalytically active self-cleaning surfaces
Laser surface structuring has long proven to be a suitable tool to produce surfaces that repel both water and bacteria on actively antibacterial and inert surfaces. As a mostly undesired side effect, the laser induced surface oxidation, that occurs when producing the pattern can also have a significant effect on the behavior of the surface. For this reason, the focus of this work is to employ direct laser interference patterning to not only affect the surface topography of titanium but to simultaneously produce a precisely tailored oxide layer. Using this approach, photocatalytically active surfaces were produced. Those surfaces can produce a variety of radicals when illuminated with UV-A light which are then used to degrade organic compounds like bacteria or organic waste. With this in mind, this work aims to develop a one-step production method for self-cleaning surfaces that uses not only the lasers topographical but also its chemical surface modifications to produce photocatalytically active surfaces with high surface area
Deterministic coupling of a single silicon-vacancy color center to a photonic crystal cavity in diamond
Deterministic coupling of single solid-state emitters to nanocavities is the
key for integrated quantum information devices. We here fabricate a photonic
crystal cavity around a preselected single silicon-vacancy color center in
diamond and demonstrate modification of the emitters internal population
dynamics and radiative quantum efficiency. The controlled, room-temperature
cavity coupling gives rise to a resonant Purcell enhancement of the zero-phonon
transition by a factor of 19, coming along with a 2.5-fold reduction of the
emitter's lifetime
- …