BL Lac Objects in the Synchrotron Proton Blazar Model

We calculate the spectral energy distribution (SED) of electromagnetic radiation and the spectrum of high energy neutrinos from BL Lac objects in the context of the Synchrotron Proton Blazar Model. In this model, the high energy hump of the SED is due to accelerated protons, while most of the low energy hump is due to synchrotron radiation by co-accelerated electrons. To accelerate protons to sufficiently high energies to produce the high energy hump, rather high magnetic fields are required. Assuming reasonable emission region volumes and Doppler factors, we then find that in low-frequency peaked BL Lacs (LBLs), which have higher luminosities than high-frequency peaked BL Lacs (HBLs), there is a significant contribution to the high frequency hump of the SED from pion photoproduction and subsequent cascading, including synchrotron radiation by muons. In contrast, in HBLs we find that the high frequency hump of the SED is dominated by proton synchrotron radiation. We are able to model the SED of typical LBLs and HBLs, and to model the famous 1997 flare of Markarian 501. We also calculate the expected neutrino output of typical BL Lac objects, and estimate the diffuse neutrino intensity due to all BL Lacs. Because pion photoproduction is inefficient in HBLs, as protons lose energy predominantly by synchrotron radiation, the contribution of LBLs dominates the diffuse neutrino intensity. We suggest that nearby LBLs may well be observable with future high-sensitivity TeV gamma-ray telescopes.Comment: 33 pages, 20 Figures. Astropart. Phys., accepte

Advanced process design for re-contouring using a time-domain dynamic material removal simulation

The repair of components often requires the removal of excess weld material. This removal is considered as re-contouring. Re-contouring processes have to be designed individually for each case of damage to fulfil the high quality requirements. Therefore, a prognosis of the machined surface topography is crucial. The material removal simulation introduced in this paper allows the prediction of process stability and surface topography for 5-axis ball end milling including dynamic effects. Different process strategies for re-contouring of Ti-6Al-4V welds are examined. It is shown, that selecting suitable process parameters can lead to high surface quality while maintaining productivity. © 2019 The Author(s)

Neutrino Background Flux from Sources of Ultrahigh-Energy Cosmic-Ray Nuclei

Motivated by Pierre Auger Observatory results favoring a heavy nuclear composition for ultrahigh-energy (UHE) cosmic rays, we investigate implications for the cumulative neutrino background. The requirement that nuclei not be photodisintegrated constrains their interactions in sources, therefore limiting neutrino production via photomeson interactions. Assuming a $dN_{\rm CR}/dE_{\rm CR} \propto E_{\rm CR}^{-2}$ injection spectrum and photodisintegration via the giant dipole resonance, the background flux of neutrinos is lower than $E_\nu^2 \Phi_\nu \sim {10}^{-9} {\rm GeV} {\rm cm}^{-2} {\rm s}^{-1} {\rm sr}^{-1}$ if UHE nuclei ubiquitously survive in their sources. This is smaller than the analogous Waxman-Bahcall flux for UHE protons by about one order of magnitude, and is below the projected IceCube sensitivity. If IceCube detects a neutrino background, it could be due to other sources, e.g., hadronuclear interactions of lower-energy cosmic rays; if it does not, this supports our strong restrictions on the properties of sources of UHE nuclei.Comment: 7 pages, 3 figure

Do CBCT scans alter surgical treatment plans? Comparison of preoperative surgical diagnosis using panoramic versus cone-beam CT images

Cone beam CT and/or panoramic images are often required for a successful diagnosis in oral and maxillofacial surgery. The aim of this study was to evaluate if 3D diagnostic imaging information had a significant impact on the decision process in six different classes of surgical indications. Material and methods: Records of all patients who had undergone both panoramic X-ray and CBCT imaging due to surgical indications between January 2008 and December 2012 were examined retrospectively. In February 2013, all surgically relevant diagnoses of both conventional panoramic radiographs and CBCT scans were retrieved from the patient's charts. It was recorded whether (1) 3D imaging presented additional surgically relevant information and (2) if the final decision of surgical therapy had been based on 2D or 3D imaging. Results: A total of 253 consecutive patients with both panoramic radiographs and CBCT analysis were eligible for the study. 3D imaging provided significantly more surgically relevant information in cases of implant dentistry, maxillary sinus diagnosis and in oral and maxillofacial traumatology. However, surgical strategies had not been influenced to any significant extent by 3D imaging. Conclusion: Within the limitations of this study it may be concluded that CBCT imaging results in significantly more surgically relevant information in implant dentistry, maxillary sinus diagnosis and in cases of oral and maxillofacial trauma. However, 3D imaging information did not alter significantly the surgical plan that was based on 2D panoramic radiography. Further studies are necessary to define indications for CBCT in detail

Current thinking about the management of recurrent pleomorphic adenoma of the parotid: a structured review

Pleomorphic adenoma is the most common tumour of the parotid gland, and can recur after excision. Recurrent pleomorphic adenoma can be a challenge to treat, and has variable outcomes. The aim of this review was to summarise current thinking in its management, which may be helpful to clinical teams and could improve patients’ health-related quality of life. We searched several online databases using the key terms pleomorphic adenoma, recurrent pleomorphic adenoma, parotid gland tumours, parotid surgery, radiotherapy and parotid pleomorphic adenoma, and parotid surgery outcomes. Information collected included sample size, recurrence rate, condition of the facial nerve, type of operation, adjuvant treatments associated with recurrence, and clinical outcome. We screened 2301 papers, of which 49 were eligible. There was no consensus among authors about management. There are few if any randomised studies, and so conclusions in most papers were based on coherent arguments. Pleomorphic adenomas of the parotid tend to recur after long intervals, with a propensity towards multifocal disease, and the risk of recurrence (which depends on the initial surgical technique) is higher when the initial operation was done at a young age, after enucleation, and if the initial margins were invaded. Published conclusions suggest that the accepted management varies from observation in selected cases to total parotidectomy with or without postoperative radiotherapy

A comparative analysis using flowmeter, laser-Doppler spectrophotometry, and indocyanine green-videoangiography for detection of vascular tenosis in free flaps

The effects of gradual vascular occlusion on the blood supply of perfused areas are poorly described. Information relating to the comparison of flap monitoring techniques is lacking. Varying stenotic conditions (0%, 25%, 50%, 75% and 100%) were generated on purpose at the A. and V. femoralis in the rat model. Analyses included flowmeter, simultaneous laser-Doppler flowmetry and tissue spectrophotometry (O2C) and indocyanine green- (ICG-) videoangiography with integrated FLOW 800 tool. A Random Forests prediction model was used to analyse the importance of each method to diagnose the stenotic conditions. The ability to discriminate and to accurately estimate the probability of stenosis was assessed by Receiver Operating Characteristic (ROC) curves and calibration plots. Blood flow changes for all modalities were described in detail. Flowmeter displayed earliest a linear decrease as a result of increasing stenosis. A stenosis of 50% degrees was most difficult to detect correctly. The combination of flowmeter and ICG-videoangiography showed high diagnostic power for each stenotic situation (area under the ROC > 0.79). Flowmeter and ICG-videoangiography showed to be most relevant in detection of varying stenotic conditions and may change the clinical outcome. The O2C showed less effect on varying stenotic situations as the only surface monitoring device

Propagation of ultra-high energy protons in the nearby universe

We present a new calculation of the propagation of protons with energies above $10^{19}$ eV over distances of up to several hundred Mpc. The calculation is based on a Monte Carlo approach using the event generator SOPHIA for the simulation of hadronic nucleon-photon interactions and a realistic integration of the particle trajectories in a random extragalactic magnetic field. Accounting for the proton scattering in the magnetic field affects noticeably the nucleon energy as a function of the distance to their source and allows us to give realistic predictions on arrival energy, time delay, and arrival angle distributions and correlations as well as secondary particle production spectra.Comment: 12 pages, 9 figures, ReVTeX. Physical Review D, accepte

High-Energy Neutrinos from Photomeson Processes in Blazars

An important radiation field for photomeson neutrino production in blazars is shown to be the radiation field external to the jet. Assuming that protons are accelerated with the same power as electrons and injected with a -2 number spectrum, we predict that km^2 neutrino telescopes will detect about 1-to-several neutrinos per year from flat spectrum radio quasars (FSRQs) such as 3C 279. The escaping high-energy neutron and photon beams transport inner jet energy far from the black-hole engine, and could power synchrotron X-ray jets and FR II hot spots and lobes.Comment: revised paper (minor revisions), accepted for publication in PR

Unidentified EGRET Sources and the Extragalactic Gamma-Ray Background

The large majority of EGRET point sources remain to this day without an identified low-energy counterpart. Whatever the nature of the EGRET unidentified sources, faint unresolved objects of the same class must have a contribution to the diffuse gamma-ray background: if most unidentified objects are extragalactic, faint unresolved sources of the same class contribute to the background, as a distinct extragalactic population; on the other hand, if most unidentified sources are Galactic, their counterparts in external galaxies will contribute to the unresolved emission from these systems. Understanding this component of the gamma-ray background, along with other guaranteed contributions from known sources, is essential in any attempt to use gamma-ray observations to constrain exotic high-energy physics. Here, we follow an empirical approach to estimate whether a potential contribution of unidentified sources to the extragalactic gamma-ray background is likely to be important, and we find that it is. Additionally, we comment on how the anticipated GLAST measurement of the diffuse gamma-ray background will change, depending on the nature of the majority of these sources.Comment: 6 pages, 3 figures, to appear in proceedings of "The Multi-Messenger Approach to High Energy Gamma-Ray Sources", Barcelona, 4-7 July 2006; comments welcom

Spatial Light Modulators for the Manipulation of Individual Atoms

We propose a novel dipole trapping scheme using spatial light modulators (SLM) for the manipulation of individual atoms. The scheme uses a high numerical aperture microscope to map the intensity distribution of a SLM onto a cloud of cold atoms. The regions of high intensity act as optical dipole force traps. With a SLM fast enough to modify the trapping potential in real time, this technique is well suited for the controlled addressing and manipulation of arbitrarily selected atoms.Comment: 9 pages, 5 figure