1,333 research outputs found

    Significant variability exists in preoperative planning software measures of glenoid morphology for shoulder arthroplasty

    Get PDF
    Background & Hypothesis: We sought to assess the reliability of 4 different shoulder arthroplasty 3-dimensional preoperative planning programs. Comparison was also made to manual measurements conducted by 2 fellowship-trained musculoskeletal radiologists. We hypothesized that there would be significant variation in measurements of glenoid anatomy affected by glenoid deformity. Methods: A retrospective review of computed tomography (CT) scans of patients undergoing shoulder arthroplasty was undertaken. A total of 76 computed tomographies were analyzed for glenoid version and inclination by 4 templating software systems (VIP, Blueprint, TrueSight, ExactechGPS). Inter-rater reliability was assessed via intra-class correlation coefficient (ICC). For those shoulders with glenohumeral arthritis (58/76), ICC was also calculated when sub-grouping by modified Walch classification. Lin\u27s concordance correlation coefficient was calculated for each system with 2 musculoskeletal-trained radiologists’ measurements. Results: Measurements of glenoid version and inclination differed between at least 2 programs by 5Âș-10Âș in 75% and 92% of glenoids respectively, and by \u3e10Âș in 18% and 45% respectively. ICC was excellent for version but only moderate for inclination. ICC was highest among Walch A glenoids for both version (near excellent) and inclination (good), and lowest among Walch D for version (near poor) and Walch B for inclination (moderate). When measuring version, VIP had the highest concordance with manual measurement; Blueprint had the lowest. For inclination Blueprint had the highest concordance; ExactechGPS had the lowest. Discussion & Conclusion: Despite overall high reliability for measures of glenoid version between 4 frequently utilized shoulder arthroplasty templating softwares, this reliability is significantly affected by glenoid deformity. The programs were overall less reliable when measuring inclination, and a similar trend of decreasing reliability with increasing glenoid deformity emerged that was not statistically significant. Concordance with manual measurement is also variable. Further research is needed to understand how this variability should be accounted for during shoulder arthroplasty preoperative planning. Level of Evidence: Level III; Retrospective Comparative Stud

    Search for a vector-like quark Tâ€Č → tH via the diphoton decay mode of the Higgs boson in proton-proton collisions at s \sqrt{s} = 13 TeV

    Get PDF
    A search for the electroweak production of a vector-like quark Tâ€Č, decaying to a top quark and a Higgs boson is presented. The search is based on a sample of proton-proton collision events recorded at the LHC at = 13 TeV, corresponding to an integrated luminosity of 138 fb−1. This is the first Tâ€Č search that exploits the Higgs boson decay to a pair of photons. For narrow isospin singlet Tâ€Č states with masses up to 1.1 TeV, the excellent diphoton invariant mass resolution of 1–2% results in an increased sensitivity compared to previous searches based on the same production mechanism. The electroweak production of a Tâ€Č quark with mass up to 960 GeV is excluded at 95% confidence level, assuming a coupling strength ÎșT = 0.25 and a relative decay width Γ/MTâ€Č < 5%

    Combined searches for the production of supersymmetric top quark partners in proton–proton collisions at √s=13Te

    Get PDF
    A combination of searches for top squark pair production using proton–proton collision data at a center-of-mass energy of 13TeV at the CERN LHC, corresponding to an integrated luminosity of 137fb−1^{-1} collected by the CMS experiment, is presented. Signatures with at least 2 jets and large missing transverse momentum are categorized into events with 0, 1, or 2 leptons. New results for regions of parameter space where the kinematical properties of top squark pair production and top quark pair production are very similar are presented. Depending on the model, the combined result excludes a top squark mass up to 1325GeV for a massless neutralino, and a neutralino mass up to 700GeV for a top squark mass of 1150GeV. Top squarks with masses from 145 to 295GeV, for neutralino masses from 0 to 100GeV, with a mass difference between the top squark and the neutralino in a window of 30GeV around the mass of the top quark, are excluded for the first time with CMS data. The results of theses searches are also interpreted in an alternative signal model of dark matter production via a spin-0 mediator in association with a top quark pair. Upper limits are set on the cross section for mediator particle masses of up to 420GeV

    Search for high-mass exclusive γγ → WW and γγ → ZZ production in proton-proton collisions at s \sqrt{s} = 13 TeV

    Get PDF

    Measurement of the Higgs boson inclusive and differential fiducial production cross sections in the diphoton decay channel with pp collisions at s \sqrt{s} = 13 TeV

    Get PDF
    The measurements of the inclusive and differential fiducial cross sections of the Higgs boson decaying to a pair of photons are presented. The analysis is performed using proton-proton collisions data recorded with the CMS detector at the LHC at a centre-of-mass energy of 13 TeV and corresponding to an integrated luminosity of 137 fb−1^{−1}. The inclusive fiducial cross section is measured to be σfidσ_{fid}=73.4−5.3+5.4^{+5.4}_{−5.3}(stat)−2.2+2.4^{+2.4}_{−2.2}(syst) fb, in agreement with the standard model expectation of 75.4 ± 4.1 fb. The measurements are also performed in fiducial regions targeting different production modes and as function of several observables describing the diphoton system, the number of additional jets present in the event, and other kinematic observables. Two double differential measurements are performed. No significant deviations from the standard model expectations are observed

    A search for new physics in central exclusive production using the missing mass technique with the CMS detector and the CMS-TOTEM precision proton spectrometer

    Get PDF
    A generic search is presented for the associated production of a Z boson or a photon with an additional unspecified massive particle X, pp → pp + Z/γ + X, in proton-tagged events from proton–proton collisions at √s = 13 TeV, recorded in 2017 with the CMS detector and the CMS-TOTEM precision proton spectrometer. The missing mass spectrum is analysed in the 600–1600 GeV range and a fit is performed to search for possible deviations from the background expectation. No significant excess in data with respect to the background predictions has been observed. odelindependent upper limits on the visible production cross section of pp → pp + Z/γ + X are set

    Search for heavy resonances decaying to Z(ΜΜˉ\bar{Îœ}) V(qqˉ\bar{q}â€Č) in proton-proton collisions at √s = 13 TeV

    Get PDF

    Measurement of the top quark mass using events with a single reconstructed top quark in pp collisions at s\sqrt{s} = 13 TeV

    Get PDF
    A measurement of the top quark mass is performed using a data sample enriched with single top quark events produced in the t channel. The study is based on proton- proton collision data, corresponding to an integrated luminosity of 35.9 fb−1^{-1}, recorded at s\sqrt{s} = 13 TeV by the CMS experiment at the LHC in 2016. Candidate events are selected by requiring an isolated high-momentum lepton (muon or electron) and exactly two jets, of which one is identified as originating from a bottom quark. Multivariate discriminants are designed to separate the signal from the background. Optimized thresholds are placed on the discriminant outputs to obtain an event sample with high signal purity. The top quark mass is found to be 172.13+0.76^{+0.76}−0.77_{-0.77} GeV, where the uncertainty includes both the statistical and systematic components, reaching sub-GeV precision for the first time in this event topology. The masses of the top quark and antiquark are also determined separately using the lepton charge in the final state, from which the mass ratio and difference are determined to be 0.9952+0.0079^{+0.0079}−0.0104_{-0.0104} and 0.83+1.79^{+1.79}−1.35_{-1.35} GeV, respectively. The results are consistent with CPT invariance

    Search for pair-produced vector-like leptons in final states with third-generation leptons and at least three b quark jets in proton-proton collisions at √s = 13 TeV

    Get PDF

    Measurement of the cross section of top quark-antiquark pair production in association with a W boson in proton-proton collisions at s \sqrt{s} = 13 TeV

    Get PDF
    The production of a top quark-antiquark pair in association with a W boson (ttˉW)(t\bar{t}W) is measured in proton-proton collisions at a center-of-mass energy of 13 TeV. The analyzed data was recorded by the CMS experiment at the CERN LHC and corresponds to an integrated luminosity of 138 fb−1^{−1}. Events with two or three leptons (electrons and muons) and additional jets are selected. In events with two leptons, a multiclass neural network is used to distinguish between the signal and background processes. Events with three leptons are categorized based on the number of jets and of jets originating from b quark hadronization, and the lepton charges. The inclusive (ttˉW)(t\bar{t}W) production cross section in the full phase space is measured to be 868 ± 40(stat) ± 51(syst) fb. The (ttˉW)+(t\bar{t}W)+ and (ttˉW)−(t\bar{t}W)− cross sections are also measured as 553 ± 30(stat) ± 30(syst) and 343 ± 26(stat) ± 25(syst) fb, respectively, and the corresponding ratio of the two cross sections is found to be 1.61±0.15(stat)−0.05+0.07^{+0.07}_{−0.05}(syst). The measured cross sections are larger than but consistent with the standard model predictions within two standard deviations, and represent the most precise measurement of these cross sections to date
    • 

    corecore