The behavior of nanothermite reaction based on Bi2O3/Al

We studied the impact of aluminum particle size and the thickness of surrounding alumina layer on the dynamic pressure discharge of nanothermite reactions in the Bi2O3/Al system. A pressure discharge from 9 to 13 MPa was generated using as-synthesized Bi2O3 nano-particles produced by combustion synthesis and Al nanoparticles with size from 3 μm to 100 nm. The maximum reaction temperature was measured to be ∼2700 °C. The estimated activation energy of the reaction was 45 kJ/mol. A very large (several orders of magnitude) difference existed between the rate of the pressure pulse release by nanothermite reactions and by thermite reactions with large aluminum particles. The maximum observed pressurization rate was 3200 GPa/s. The time needed to reach the peak pressure was 0.01 ms and 100 ms for aluminum particles with diameter of 100 nm and 70 microns, respectively. The discharge pressure was a monotonic decreasing function of the thickness of the surrounding alumina layer

Generation of the Transient Electrical and Spontaneous Magnetic Fields by Solid State Combustion

Experiments revealed that transient electric field intensities up to 2.5 V/cm were generated during the initial period of combustion synthesis of the ferromagnetic products before the maximum temperature was reached. This occurred when the iron particles were partially oxidized and the reaction product was mainly magnetite sFe3O4d. The electromagnetic field caused spontaneous magnetization of the product in the postcombustion zone. Magnetic field values up to 4 µT formed after the sample temperature fell below the Curie temperature and the initial reactants were completely converted to the ferromagnetic phase PbFe12O19. Increasing the volume of the samples increases the absolute residual magnetic field magnitude after cooling. We present possible mechanisms of the electromagnetic field generation during the combustion

Spontaneous magnetization generated by spin, pulsating, and planar combustion synthesis

The motion of the high temperature front during combustion synthesis of ferrite materials generates residual magnetization in cylindrical product samples. The combustion wave created a current density of up to 10 A/cm2, which influenced the magnetization distribution. The measured peak magnetic field intensity was up to 8 mT. Qualitatively different magnetic field maps were generated in ferrite samples synthesized by different combustion modes. The average magnetization vector generated by either planar or pulsating combustion was oriented at a smaller angle with respect to the pellet axis ~f\u3c45°! than those generated by spin combustion ~60

Branch-and-lift algorithm for deterministic global optimization in nonlinear optimal control

This paper presents a branch-and-lift algorithm for solving optimal control problems with smooth nonlinear dynamics and potentially nonconvex objective and constraint functionals to guaranteed global optimality. This algorithm features a direct sequential method and builds upon a generic, spatial branch-and-bound algorithm. A new operation, called lifting, is introduced, which refines the control parameterization via a Gram-Schmidt orthogonalization process, while simultaneously eliminating control subregions that are either infeasible or that provably cannot contain any global optima. Conditions are given under which the image of the control parameterization error in the state space contracts exponentially as the parameterization order is increased, thereby making the lifting operation efficient. A computational technique based on ellipsoidal calculus is also developed that satisfies these conditions. The practical applicability of branch-and-lift is illustrated in a numerical example. © 2013 Springer Science+Business Media New York

Prenatal hypoxia induces increased cardiac contractility on a background of decreased capillary density.

Background: Chronic hypoxia in utero (CHU) is one of the most common insults to fetal development and may be associated with poor cardiac recovery from ischaemia-reperfusion injury,yet the effects on normal cardiac mechanical performance are poorly understood. Methods: Pregnant female wistar rats were exposed to hypoxia (12% oxygen, balance nitrogen)for days 10–20 of pregnancy. Pups were born into normal room air and weaned normally. At 10 weeks of age, hearts were excised under anaesthesia and underwent retrograde 'Langendorff' perfusion. Mechanical performance was measured at constant filling pressure (100 cm H2O) with intraventricular balloon. Left ventricular free wall was dissected away and capillary density estimated following alkaline phosphatase staining. Expression of SERCA2a and Nitric Oxide Synthases (NOS) proteins were estimated by immunoblotting. Results: CHU significantly increased body mass (P < 0.001) compared with age-matched control rats but was without effect on relative cardiac mass. For incremental increases in left ventricular balloon volume, diastolic pressure was preserved. However, systolic pressure was significantly greater following CHU for balloon volume = 50 μl (P < 0.01) and up to 200 μl (P < 0.05). For higher balloon volumes systolic pressure was not significantly different from control. Developed pressures were correspondingly increased relative to controls for balloon volumes up to 250 μl (P < 0.05).Left ventricular free wall capillary density was significantly decreased in both epicardium (18%; P <0.05) and endocardium (11%; P < 0.05) despite preserved coronary flow. Western blot analysis revealed no change to the expression of SERCA2a or nNOS but immuno-detectable eNOS protein was significantly decreased (P < 0.001) in cardiac tissue following chronic hypoxia in utero. Conclusion: These data offer potential mechanisms for poor recovery following ischaemia, including decreased coronary flow reserve and impaired angiogenesis with subsequent detrimental effects of post-natal cardiac performance

Selective Decrease of Components of the Creatine Kinase System and ATP Synthase Complex in Chronic Chagas Disease Cardiomyopathy

Chronic Chagas disease cardiomyopathy (CCC) affects millions in endemic areas and is presenting in growing numbers in the USA and European countries due to migration currents. Clinical progression, length of survival and overall prognosis are significantly worse in CCC patients when compared to patients with dilated cardiomyopathy of non-inflammatory etiology. Impairment of energy metabolism seems to play a role in heart failure due to cardiomyopathies. Herein, we have analyzed energy metabolism enzymes in myocardium samples of CCC patients comparing to other non-inflammatory cardiomyopathies. We found that myocardial tissue from CCC patients displays a significant reduction of both myocardial protein levels of ATP synthase alpha and creatine kinase enzyme activity, in comparison to control heart samples, as well as idiopathic dilated cardiomyopathy and ischemic cardiomyopathy. Our results suggest that CCC myocardium displays a selective energetic deficit, which may play a role in the reduced heart function observed in such patients

Transversal hot zones formation in catalytic packed-bed reactors

Spatiotemporal patterns reported to form in the cross sections of packed-bed reactors (PBRs) may pose severe safety hazard when present next to the reactor wall. Understanding what causes their formation and dynamic features is essential for the rational development of design and control strategies that circumvent their generation. We review the current knowledge and understanding about the formation of these transversal temperature patterns. Simulations and model analysis revealed that the formation of the hot spots and their dynamics are sensitive to the assumed kinetic and reactor models. Under practical conditions, stable symmetry-breaking bifurcation to nonuniform states, from stable, stationary, transversally Uniform states cannot be predicted by common PBR models with a rate expression that depends only on the surface temperature and concentration of the limiting reactant. However, analysis and simulations reveal that transient nonuniform transversal temperatures may emerge in an upstream moving traveling front under practical conditions. Microkinetic oscillatory reactions predict the formation of a plethora of intricate spatiotemporal temperature patterns and temperature front motions that are sensitive to the reactor operating conditions and properties such as diameter and initial conditions. The predicted temperature patterns may be rather intricate as a result of conjugation of several modes. The nonlinear coupling between the states at different axial positions, that is, the interaction among the local temperature and concentrations at different cross-sections of the bed, may explain the intricate conjugation of several modes and modulation of the observed spatiotemporal patterns. While some simulations predicted spatiotemporal pattern evolution in PBRs, there is a need to understand which reaction mechanisms may lead to their formation. Most previous simulations and analysis utilized two-dimensional reactor models. However, hot zones are three-dimensional structures, often very small, and difficult to detect in large reactors. A 3-D simulation, although tedious, is necessary to provide full information about the size, shape and dynamic features of small hot zones. Moreover, common PBR models may have to be modified to account for the impact of local states such as flow distribution and nonuniform packing. Verification of the various model predictions requires in situ measurements of 3-D hot zones

Efficient computation of periodic state of cyclic fixed-bed processes

A novel methodology is presented that combines short-cut methods and efficient numerical algorithms to enhance the efficiency of numerical simulation of forced cyclic fixed-bed processes and to improve the insight about their advantages. It is shown that the model of a forced cyclic process can be approximated by a continuous process model featuring qualitatively equivalent behavior. This model reduction is exact for infinitesimally small cycle periods. Using this limiting case as a generic pattern, we derive two algorithms for computing the periodic state. The first algorithm is based on a linear expansion around the zero-order solution. A considerable advantage of the method is its compatibility with adaptive solvers for the underlying PDAE-systems. The second exploits the dominant role of dispersive effects on the zero-order solution. The resulting low-dimensional spectrum of significant eigenvalues is mapped to a coarse-grid representation of the periodic solution, reducing the computational effort by one order of magnitude compared to standard methods. This low-dimensional representation of the system is most advantageous in the computation of bifurcation diagrams. The advantages of the proposed methods are illustrated by simulations of the cyclic operation of two systems, a regenerative heat exchanger and a reverse-flow reactor. (C) 2013 Elsevier Ltd. All rights reserved