Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651

A low-friction and wear resistant TiAlN/VN multilayer coating with TiAlN/VN bilayer thickness 3 nm has been grown by using the combined cathodic arc etching and unbalanced magnetron sputtering deposition on high speed steel tools for dry cutting of aluminium alloys. In this paper, in-lab and industrial high speed milling tests have been performed on an aerospace aluminium alloy 7010-T7651. The results show that the TiAlN/VN coated tools achieved lower cutting forces, lower metal surface roughness, and significantly longer tool lifetime by three times over the uncoated tools as a result of the low friction and eliminated tool-metal adhesion. Under the same conditions, a TiAlN based multicomponent coating TiAlCrYN also increased the tool lifetime by up to 100% despite the high cutting forces measured

Numerical Analysis of 3-Dimensional Scaling Rules on a 1.2-kV Trench Clustered IGBT

3-dimensional scaling rules for the cathode cells and threshold voltages of a 1.2-kV Trench Clustered IGBT (TCIGBT) are investigated using calibrated models in Synopsys Sentaurus TCAD tools. Scaling down results in an enhancement of current gain of the inherent thyristor action which reduces the forward voltage drop even more than that of a scaled Trench IGBT (TIGBT). For identical switching losses, at a scaling factor k=3, the forward voltage drop is reduced by 20% at 300K and 30% at 400K when compared to the conventional TCIGBT (k=1). Most importantly, despite its lower conduction losses than an equivalent TIGBT, a scaled TCIGBT structure can maintain its short circuit capability, due to the additional scaling principle applied to the n-well and p-well regions, maintaining the self-clamping feature. Thus, TCIGBT is a more efficient chip-for-chip, reliable replacement of a TIGBT for energy savings in applications

A GIS-based assessment of spatial accessibility to County hospitals: A case study of dancheng County, China

National Science Foundation of China; Shanghai Jiao Tong University; Nanyang Technological University<span class="MedBlackText">The aim of this study was to investigate Chinese rural people's accessibility to healthcare. GIS techniques and the gravity-based model were combined to calculate the measure of accessibility to county hospitals in Dancheng County. The result demonstrates that when travel friction coefficient is 1.0, the highest accessibility is found in the county seat and declines outward to other settlements. The residents in the east and southeast part of the county have worse accessibility to county hospitals. To improve rural people's accessibility to health services, the paper suggests that the local government should build a county-level hospital in the east part of the county and increase road class to reduce travel time. The suggestions can be applied to other counties in rural China. Finally, bus routes and timetables should be considered in a future study of measuring rural people's access to services in the county seat. </span

Bergman Kernel from Path Integral

We rederive the expansion of the Bergman kernel on Kahler manifolds developed by Tian, Yau, Zelditch, Lu and Catlin, using path integral and perturbation theory, and generalize it to supersymmetric quantum mechanics. One physics interpretation of this result is as an expansion of the projector of wave functions on the lowest Landau level, in the special case that the magnetic field is proportional to the Kahler form. This is relevant for the quantum Hall effect in curved space, and for its higher dimensional generalizations. Other applications include the theory of coherent states, the study of balanced metrics, noncommutative field theory, and a conjecture on metrics in black hole backgrounds. We give a short overview of these various topics. From a conceptual point of view, this expansion is noteworthy as it is a geometric expansion, somewhat similar to the DeWitt-Seeley-Gilkey et al short time expansion for the heat kernel, but in this case describing the long time limit, without depending on supersymmetry.Comment: 27 page

Three-dimensional lattice-Boltzmann simulations of critical spinodal decomposition in binary immiscible fluids

We use a modified Shan-Chen, noiseless lattice-BGK model for binary immiscible, incompressible, athermal fluids in three dimensions to simulate the coarsening of domains following a deep quench below the spinodal point from a symmetric and homogeneous mixture into a two-phase configuration. We find the average domain size growing with time as $t^\gamma$, where $\gamma$ increases in the range $0.545 < \gamma < 0.717$, consistent with a crossover between diffusive $t^{1/3}$ and hydrodynamic viscous, $t^{1.0}$, behaviour. We find good collapse onto a single scaling function, yet the domain growth exponents differ from others' works' for similar values of the unique characteristic length and time that can be constructed out of the fluid's parameters. This rebuts claims of universality for the dynamical scaling hypothesis. At early times, we also find a crossover from $q^2$ to $q^4$ in the scaled structure function, which disappears when the dynamical scaling reasonably improves at later times. This excludes noise as the cause for a $q^2$ behaviour, as proposed by others. We also observe exponential temporal growth of the structure function during the initial stages of the dynamics and for wavenumbers less than a threshold value.Comment: 45 pages, 18 figures. Accepted for publication in Physical Review

On the independence of hydrogen production from methanogenic suppressor in olive mill wastewater

Anaerobic degradation of olive mill wastewater (OMW) at concentrations ranging from 2 to 100 g/L of chemical oxygen demand (COD) was assessed in batch assays. Methane was the main final product obtained for the lower concentrations tested. For 25 g COD/L, H2 was temporarily produced, albeit H2 depletion occurred, likely due to homoacetogenesis, since acetate was formed concomitantly. Hydrogen was produced and accumulated permanently in the assays containing 50 g COD/L of OMW. Methanogenesis and homoacetogenesis were naturally inhibited, suggesting that hydrogen recovery from OMW can be performed without the addition of methanogenic suppressors such as 2-bromoethanosulfonate. This fact opens new perspectives for the utilization of high OMW concentrations in a two-stage valorisation process combining biohydrogen and biomethane production.The authors thank the FCT Strategic Project PEst-OE/EQB/LA0023/2013, the FCT Project RECI/BBB-EBI/0179/2012, the Project "BioEnv - Biotechnology and Bioengineering for a sustainable world", REF. NORTE-07-0124-FEDER-000048, co-funded by the Programa Operacional Regional do Norte (ON.2 - O Novo Norte), QREN, FEDER. Also through the project PTDC/ENR/69755/2006 and grants given to Marta Goncalves SFRH/BD/40746/2007, Jose Carlos Costa SFRH/BDP/48962/2008 and Angela A Abreu SFRH/BPD/82000/2011

Quasi-spin Model for Macroscopic Quantum Tunnelling between Two Coupled Bose-Einstein Condensates

The macroscopic quantum tunneling between two coupled Bose-Einstein condensates (BEC) (radio-frequency coupled two-component BECs or two BECs confined in a double-well potential) is mapped onto the tunneling of an uniaxial spin with an applied magnetic field. The tunneling exponent is calculated with an imaginary-time path-integral method. In the limit of low barrier, the dependence of tunneling exponent on the system parameters is obtained, and the crossover temperature from thermal regime to quantum regime is estimated. The detailed information about the tunnelling will give help to control population conversion between coupled BECs and realize quantum computation with coupled BECs.Comment: 20 pages, 4 figures, accepted by Phys.Rev.

Scaling Behavior of Anomalous Hall Effect and Longitudinal Nonlinear Response in High-Tc Superconductors

Based on existing theoretical model and by considering our longitudinal nonlinear response function, we derive a nonliear equation in which the mixed state Hall resistivity can be expressed as an analytical function of magnetic field, temperature and applied current. This equation enables one to compare quantitatively the experimental data with theoretical model. We also find some new scaling relations of the temperature and field dependency of Hall resistivity. The comparison between our theoretical curves and experimental data shows a fair agreement.Comment: 4 pages, 3 figure

Phylogeny and climate explain contrasting hydraulic traits in different life forms of 150 woody Fabaceae species

The contrasting hydraulic traits observed among different plant life forms are shaped by entangled environmental and evolutionary processes. However, we lack understanding of the relative importance of life form, climate and phylogeny in explaining the variance of hydraulic traits. We analysed seven hydraulic traits and eleven climatic variables of 150 Fabaceae species representing three life forms from 62 sites worldwide, using phylogenetic comparative analyses and variance partitioning. The phylogenetic signal found in most traits disappeared after considering life form, indicating that phylogenetic conservatism in traits originated from the divergence among life forms. The trait‐climate relationships were also phylogenetically dependent, implying that trait responses are driven by climate and phylogeny together. Variance partitioning showed that phylogeny and climate explained greater trait variation than life form did. Synthesis. The climate‐driven hydraulic trait responses in Fabaceae still existed with phylogeny being considered, suggesting that this large family may be particularly sensitive to climate change. Our results emphasise the need to include phylogeny in plant hydraulic adaptation studies under future climate change

The sintering, sintered microstructure and mechanical properties of Ti-Fe-Si Alloys

A systematic study has been conducted of the sintering, sintered microstructure and tensile properties of a range of lower cost Ti-Fe-Si alloys, including Ti-3Fe-(0-4)Si, Ti-(3-6)Fe-0.5Si, and Ti-(3-6)Fe-1Si (in wt pct throughout). Small additions of Si (≤1 pct) noticeably improve the as-sintered tensile properties of Ti-3Fe alloy, including the ductility, with fine titanium silicides (TiSi) being dispersed in both the α and β phases. Conversely, additions of >1 pct Si produce coarse and/or networked TiSi silicides along the grain boundaries leading to predominantly intergranular fracture and, hence, poor ductility, although the tensile strength continues to increase because of the reinforcement by TiSi. Increasing the Fe content in the Ti-xFe-0.5/ 1.0Si alloys above 3 pct markedly increases the average grain size and changes the morphology of the α-phase phase to much thinner and more acicular laths. Consequently, the ductility drops t