Assessment of the postharvest handling system for broccoli grown in the Lockyer Valley, Queensland, Australia

In winter 1999, we assessed the handling system for broccoli grown on a farm in Gatton, Australia and marketed in the Brisbane wholesale market. The assessment covered the chain from harvesting, packing, storage, and transport, through to marketing. Process flow charts were developed, highlighting every step in the handling and marketing system. We gathered information at each process by questioning and observing, and also identified the loss points and hazards to quality. Where possible, we measured loss at each critical point and identified solutions or areas for further research. The main loss points identified were during harvesting, loading bins for the coolroom, cool storage, broccoli tipped onto carousel sorting tables, and sorting. Potential solutions and areas for further research are discussed

Eye movements may cause motor contagion effects

When a person executes a movement, the movement is more errorful while observing another person’s actions that are incongruent rather than congruent with the executed action. This effect is known as “motor contagion”. Accounts of this effect are often grounded in simulation mechanisms: increased movement error emerges because the motor codes associated with observed actions compete with motor codes of the goal action. It is also possible, however, that the increased movement error is linked to eye movements that are executed simultaneously with the hand movement because oculomotor and manual-motor systems are highly interconnected. In the present study, participants performed a motor contagion task in which they executed horizontal arm movements while observing a model making either vertical (incongruent) or horizontal (congruent) movements under three conditions: no instruction, maintain central fixation, or track the model’s hand with the eyes. A significant motor contagion-like effect was only found in the ‘track’ condition. Thus, ‘motor contagion’ in the present task may be an artifact of simultaneously executed incongruent eye movements. These data are discussed in the context of stimulation and associative learning theories, and raise eye movements as a critical methodological consideration for future work on motor contagion

A proposed approach to assess supply chain risks to meet the new challenges in the Defense industry

Thesis (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; and, (S.M.)--Massachusetts Institute of Technology, Engineering Systems Division; in conjunction with the Leaders for Global Operations Program at MIT, 2012.Cataloged from PDF version of thesis. Page 68 is blank.Includes bibliographical references (p. 65-66).Department of Defense (DoD) had doubled its planned investments in new weapon systems from about $700 billion in 2001 to nearly$1.4 trillion in 2006. Despite the technical superiority of its weapon systems, DoD's weapon systems acquisition process had been plagued with cost increases, schedule delays, and performance shortfalls'. To address the maturity gaps, DoD mandated in 2008 that all prime contractors (including Raytheon) for new US government funded defense programs to evaluate/document technology and manufacturing readiness levels (T/MRL) of their supply base. There are 10 manufacturing & 9 technology readiness levels and specific levels need to be met for certain program milestones. DoD has released a set of questionnaires (Deskbooks), designed to evaluate the maturity levels of a supplier in areas such as engineering design, operation, manufacturing, and facility etc. The goal of this thesis is to develop an assessment method, using the Deskbooks as a reference, to address the core issues in the defense acquisition process. The thesis will also take a deep dive into Raytheon's supply chain management philosophy and analyze how Raytheon's strategic sourcing initiatives align with the new challenges in the defense industry.by Cheng-Lung Chou.S.M.M.B.A

Chlorine adsorption induced structure and energetics change of vinyl chloride physisorbed on Ag(1 1 1)

On the Ag(1 1 1) surface pre-adsorbed with Cl, TDS and HREELS studies find that vinyl chloride physisorbs molecularly with a binding energy 8 kJ/mol stronger and an adsorption geometry more parallel to the surface in comparison with adsorption on clean Ag(1 1 1). The vinyl chloride in close proximity to the surface Cl has stronger binding energy than the ones further removed from Cl. The binding energy change due to surface Cl can be modeled with charge-dipole interaction between the negatively charged Cl and the large molecular dipole of vinyl chloride

Gaseous, PM2.5 Mass, and Speciated Emission Factors from Laboratory Chamber Peat Combustion

Peat fuels representing four biomes of boreal (western Russia and Siberia), temperate (northern Alaska, USA), subtropical (northern and southern Florida, USA), and tropical (Borneo, Malaysia) regions were burned in a laboratory chamber to determine gas and particle emission factors (EFs). Tests with 25 % fuel moisture were conducted with predominant smoldering combustion conditions (average modified combustion efficiency (MCE) =0.82+/-0.08). Average fuel-based EFCO2 (carbon dioxide) are highest (1400 +/- 38 g kg(-1)) and lowest (1073 +/- 63 g kg(-1)) for the Alaskan and Russian peats, respectively. EFCO (carbon monoxide) and EFCH4 (methane) are similar to 12 %15 % and similar to 0.3 %0.9 % of EFCO2, in the range of 157171 and 310 g kg(-1), respectively. EFs for nitrogen species are at the same magnitude as EFCH4, with an average of 5.6 +/- 4.8 and 4.7 +/- 3.1 g kg(-1) for EFNH3 (ammonia) and EFHCN (hydrogen cyanide); 1.9+/-1.1 g kg(-1) for EFNOx (nitrogen oxides); and 2.4+/-1.4 and 2.0 +/- 0.7 g kg(-1) for EFNOy (total reactive nitrogen) and EFN2O (nitrous oxide). An oxidation flow reactor (OFR) was used to simulate atmospheric aging times of similar to 2 and similar to 7 d to compare fresh (upstream) and aged (downstream) emissions. Filter-based EFPM2.5 varied by \u3e 4-fold (1461 g kg(-1)) without appreciable changes between fresh and aged emissions. The majority of EFPM2.5 consists of EFOC (organic carbon), with EFOC / EFPM2.5 ratios in the range of 52 %98 % for fresh emissions and similar to 14 %23 % degradation after aging. Reductions of EFOC (similar to 79 g kg(-1)) after aging are most apparent for boreal peats, with the largest degradation in low-temperature OC1 that evolves at \u3c 140 degrees C, indicating the loss of high-vapor-pressure semivolatile organic compounds upon aging. The highest EFLevoglucosan is found for Russian peat (similar to 16 g kg(-1)), with similar to 35 %50 % degradation after aging. EFs for water-soluble OC (EFWSOC) account for similar to 20 %62 % of fresh EFOC. The majority (\u3e 95 %) of the total emitted carbon is in the gas phase, with 54 %75 % CO2, followed by 8 %30 % CO. Nitrogen in the measured species explains 24 %52 % of the consumed fuel nitrogen, with an average of 35 +/- 11 %, consistent with past studies that report similar to 1/3 to 2/3 of the fuel nitrogen measured in biomass smoke. The majority (\u3e 99 %) of the total emitted nitrogen is in the gas phase, with an average of 16.7 % as NH3 and 9.5 % as HCN center dot N2O and NOy constituted 5.7 % and 2.9 % of consumed fuel nitrogen. EFs from this study can be used to refine current emission inventories

Intraosseous angiosarcoma with secondary aneurysmal bone cysts presenting as an elusive diagnostic challenge

Angiosarcoma of bone is an exceedingly rare primary bone malignancy that can present as an aggressive osteolytic lesion. Histological diagnosis can be extremely challenging, as the pathological features often resemble that of aneurysmal bone cysts. We report an interesting and peculiar case of an intraosseous angiosarcoma that presented as a diagnostic dilemma and discuss the relevant radiological and pathologic findings