Saliva substitutes in combination with highly concentrated fluorides and brushing: in vitro effects on enamel subsurface lesions

Hyposalivation is often associated with high caries activity, in particular in patients undergoing irradiation in the head/neck area. Besides the use of saliva substitutes to relieve the oral symptoms, daily application of fluoride gels or toothpaste (5,000 μg F⁻/g) is recommended for caries prevention. The aim of this study was to evaluate potentially remineralising effects of these fluoride agents in combination with saliva substitutes on enamel subsurface lesions. Demineralised bovine specimens were either stored in mineral water [control; saturation with respect to octacalcium phosphate (S(OCP)): 0.8], a demineralising saliva substitute (Glandosane; S(OCP): 0.3) or in a modified (with respect to S(OCP)) saliva substitute [Saliva natura (SN); S(OCP): 1.9] for 5 weeks (37°C). The following treatments were applied twice daily (11-13/group): no treatment (0), ProSchmelz fluoride gel (PS; 10 min application), Duraphat toothpaste (DP; 10 s; brushing with toothpaste/storage solution slurry), combination of DP+PS. Mineral parameters before/after storage were evaluated from microradiographs. Storage in Glandosane led to significant demineralisation (p 0.05). Storage in water alone resulted in no changes in mineral parameters (p > 0.05), whereas in combination with fluorides remineralisation could be shown (p < 0.05). For SN alone, remineralisation was observed (p < 0.05), but no additional beneficial effects of fluorides were detected. Under the conditions chosen, the fluoride agents reduce the demineralising effects of Glandosane and promote the remineralisation of specimens stored in water. Remineralising effects of SN could not be enhanced by the fluorides

Predicting mortality in the very old: a machine learning analysis on claims data.

Machine learning (ML) may be used to predict mortality. We used claims data from one large German insurer to develop and test differently complex ML prediction models, comparing them for their (balanced) accuracy, but also the importance of different predictors, the relevance of the follow-up period before death (i.e. the amount of accumulated data) and the time distance of the data used for prediction and death. A sample of 373,077 insured very old, aged 75 years or above, living in the Northeast of Germany in 2012 was drawn and followed over 6 years. Our outcome was whether an individual died in one of the years of interest (2013-2017) or not; the primary metric was (balanced) accuracy in a hold-out test dataset. From the 86,326 potential variables, we used the 30 most important ones for modeling. We trained a total of 45 model combinations: (1) Three different ML models were used; logistic regression (LR), random forest (RF), extreme gradient boosting (XGB); (2) Different periods of follow-up were employed for training; 1-5 years; (3) Different time distances between data used for prediction and the time of the event (death/survival) were set; 0-4 years. The mortality rate was 9.15% in mean per year. The models showed (balanced) accuracy between 65 and 93%. A longer follow-up period showed limited to no advantage, but models with short time distance from the event were more accurate than models trained on more distant data. RF and XGB were more accurate than LR. For RF and XGB sensitivity and specificity were similar, while for LR sensitivity was significantly lower than specificity. For all three models, the positive-predictive-value was below 62% (and even dropped to below 20% for longer time distances from death), while the negative-predictive-value significantly exceeded 90% for all analyses. The utilization of and costs for emergency transport as well as emergency and any hospital visits as well as the utilization of conventional outpatient care and laboratory services were consistently found most relevant for predicting mortality. All models showed useful accuracies, and more complex models showed advantages. The variables employed for prediction were consistent across models and with medical reasoning. Identifying individuals at risk could assist tailored decision-making and interventions

Success and complication rates of non-precious alloy telescopic crowns in a general dental practice.

OBJECTIVES This retrospective, single-center, practice-based cohort study aimed to analyze factors associated with the success of removable partial dentures retained by telescopic crowns (TRPD). MATERIALS AND METHODS TRPD which were placed in a single practice of a practice-based research network were analyzed. Data from 139 patients (age (SD): 66 (11) years; 66 female) with 174 TRPD including 488 non-precious alloy telescopic crowns (TC) between 2004 and 2016 were included. TC without any technical complication were considered as successful, and as survived, if they were still in function at the last check-up. Multilevel Cox proportional hazard models were used to evaluate the association between clinical factors and time until failure. RESULTS Within a mean follow-up period (SD) of 4.2 (3.3) years (min-max: 1 day-12 years), 372 (76%) TC (AFR5years,TC-level: 5.0%) as well as 136 (87%) TRPD (AFR5years,TRPD-level: 5.1%) ("worst-case scenario") and 150 (86%) TRPD (AFR5years,TRPD-level: 3.4%) ("best-case scenario") were considered as successful. The main failure types were recementation (n = 39), endodontic treatment (n = 36), and extraction (n = 35). TC in male patients showed 1.6 times higher risk for failure than in female patients (95%CI: 1.1-2.4; p = 0.023). TC on premolars showed 2.2 times higher risk for failure than on incisors (95%CI: 1.1-5.0; p = 0.023) and TC in dentures with ≤ 3TC showed 2.1 times higher risk for failure than TC in dentures with > 3TC (1.3-3.4; p = 0.042). Furthermore, TC on the most distal tooth in an arch showed 2.4 times higher risk for failure than TC on a more mesial tooth (1.5-3.8; p < 0.001). CONCLUSION For removable partial dentures retained by telescopic crowns, high success rates could be found after up to 12 years. Patient-level and tooth-level factors were significantly associated with failure. CLINICAL RELEVANCE For removable partial dentures retained by telescopic crowns, high success rates could be found after up to 12 years. Patient-level and tooth-level factors were significantly associated with failure

Posterior ceramic versus metal restorations: A systematic review and meta-analysis.

OBJECTIVES The goal of this systemic review and meta-analysis was to evaluate the longevity of indirect adhesively-luted ceramic compared to conventionally cemented metal single tooth restorations. DATA Randomized controlled trials (RCT) investigating indirect adhesively-luted ceramic restorations compared to metal or metal-based cemented restorations in permanent posterior teeth. SOURCES Three electronic databases (PubMed, CENTRAL (Cochrane) and Embase) were screened. No language or time restrictions were applied. Study selection, data extraction and quality assessment were done in duplicate. Risk of Bias and level of evidence was graded using Risk of Bias 2.0 tool and Grade Profiler 3.6. RESULTS A total of 3056 articles were found by electronic databases. Finally, four RCTs were selected. Overall, 443 restorations of which 212 were adhesively-luted ceramic restorations and 231 conventionally cemented metal restorations have been placed in 314 patients (age: 22-72 years). The highest annual failure rates were found for ceramic restorations ranging from 2.1% to 5.6%. Lower annual failure rates were found for metal (gold) restorations ranging from 0% to 2.1%. Meta-analysis could be performed for adhesively-luted ceramic vs. conventionally cemented metal restorations. Conventionally cemented metal restoration showed a significantly lower failure rate than adhesively-luted ceramic ones (visual-tactile assessment: Risk Ratio (RR)[95%CI]=0.31[0.16,0.57], low level of evidence). Furthermore, all studies showed a high risk of bias. CONCLUSION Conventionally cemented metal restorations revealed significantly lower failure rates compared to adhesively-luted ceramic ones, although the selected sample was small and with medium follow-up periods with high risks of bias

Costs for Statutorily Insured Dental Services in Older Germans 2012–2017

Objectives: We assessed the costs of dental services in statutorily insured, very old (geriatric) Germans. Methods: A comprehensive sample of very old (≥75 years) people insured at a large Northeastern statutory insurer was followed over 6 years (2012–2017). We assessed dental services costs for: (1) examination, assessments and advice, (2) operative, (3) surgical, (4) prosthetic, (5) periodontal, (6) preventive and (7) outreach services. Association of utilization with: (1) sex, (2) age, (3) region, (4) social hardship status, (5) International Disease Classification (ICD-10) diagnoses and (6) Diagnoses Related Groups (DRGs) was explored. Results: 404,610 individuals with a mean (standard deviation, SD) age 81.9 (5.4 years) were followed, 173,733 did not survive follow-up. Total mean costs were 129.61 (310.97) euro per capita; the highest costs were for prosthetic (54.40, SD 242.89 euro) and operative services (28.40, SD 68.38 euro), examination/advice (21.15, SD 28.77 euro), prevention (13.31, SD 49.79 euro), surgery (5.91, SD 23.91 euro), outreach (4.81, SD 28.56 euro) and periodontal services (1.64, SD 7.39 euro). The introduction of new fee items for outreach and preventive services between 2012 and 2017 was reflected in costs. Total costs decreased with increasing age, and this was also found for all service blocks except outreach and preventive services. Costs were higher in those with social hardship status, and in Berlin than Brandenburg and Mecklenburg-Western Pomerania. Certain general health conditions were associated with increased or decreased costs. Conclusions: Costs were associated with sex, social hardship status, place of living and general health conditions. Clinical significance: Dental services costs for the elderly in Germany are unequally distributed and, up to a certain age or health status, generated by invasive interventions mainly. Policy makers should incentivize preventive services earlier on and aim to distribute expenses more equally

A practical method for gas changing time estimation using a simple gas-liquid mass transfer model

The present work explains a practical and simple method to calculate the gas changing time of anaerobic systems. It is substantiated under the physics of gas-liquid transfer theory and allows researchers to obtain an approximate value of gas changing time with few measurements of the gas composition in the outlet of the reactor. The only analytical equipment required is a gas analyzer, and calculations can be done using a spreadsheet. Along with the validation of the model, a short guide for its application in the laboratory is introduced. The model fits the experimental data with less than 1% error in the composition of the out-gas when no carbon dioxide is involved. This method will allow savings in valuable resources such as time and gases while providing greater comprehension of the characteristics of the gas-liquid transfer of the studied system

Effects of Dentifrices Differing in Fluoride Content on Remineralization Characteristics of Dentin in vitro

Objectives: The aim of this study was to compare the caries preventive effect of highly fluoridated dentifrices and gels on sound dentin as well as on artificial dentin caries-like lesions. Methods: Bovine dentin specimens (n = 240), with 2 different surfaces each (1 sound surface [sound treatment (ST)] and one caries lesion [demineralized treatment (DT)]), were prepared and randomly allocated to one highly (6 × 120 min demineralization/day [H]) and one lowly cariogenic (6 × 60 min demineralization/day [L]) pH-cycling model. Treatments during pH-cycling (28 days) were: brushing 2×/ day with: 0 ppm F [H0/L0], 1,450 ppm F [H1,450/L1,450], 2,800 ppm F [H2,800/L2,800], 5,000 ppm F [H5,000/L5,000], 5,000 ppm F plus TCP [H5,000+TCP/L5,000+TCP], and 12,500 ppm F [H12,500/ L12,500] containing dentifrices/gels. Dentifrice/gel slurries were prepared with deionized water (1: 2 wt/wt). Differences in integrated mineral loss (ΔΔZ) and Δ lesion depth were calculated between values before and after pH-cycling using transversal microradiography. Results: The correlation between ΔΔZDT and F– was strong for the highly (rH = 0.691; p < 0.001) and moderate (rL = 0.500; p < 0.001) for the lowly cariogenic model, indicating a fluoride dose-response for both. Significant differences for ΔΔZDT and ΔΔZST could be found between H0, H1,450, H5,000, and H12,500 as well as L0, L5,000, and L125,000 (p ≤ 0.046; analysis of covariance [ANCOVA]). Except for 0 ppm F–, no significant difference in ΔΔZST and ΔΔZDT could be found between the highly and lowly cariogenic model (p ≥ 0.056; ANCOVA). Conclusion: For both pH-cycling conditions a dose-response for fluoride could be revealed. For elderly people with exposed root surfaces, the use of gels containing 12,500 ppm F instead of regularly (1,450 ppm F) or highly (5,000 ppm F) fluoridated dentifrices should be further investigated, as it offered higher cariespreventive effects in vitro

Demineralization Inhibitory Effects of Highly Concentrated Fluoride Dentifrice and Fluoride Gels/Solutions on Sound Dentin and Artificial Dentin Caries Lesions in vitro

Objectives: The aim of this in vitro study was to compare the demineralization inhibitory effect of gels/solutions used in combination with either standard or highly fluoridated dentifrices on sound dentin as well as on artificial dentin carieslike lesions. Methods: Bovine dentin specimens (n = 240) with two different surfaces each (sound [ST] and artificial caries lesion [DT]) were prepared and randomly allocated to twelve groups. Weekly interventions during pH-cycling (28 days, 6 × 120 min demineralization/day) were: the application of gels/solutions containing amine fluoride/sodium fluoride (12,500 ppm F [ppm]; pH = 4.4; AmF); NaF (12,500 ppm; pH = 6.6; NaF1); NaF (12,500 ppm; pH = 6.3; NaF2); silver diamine fluoride (14,200 ppm; pH = 8.7; SDF); acidulated phosphate fluoride (12,500 ppm; pH = 3.8; APF), and no intervention (standard control; S). Furthermore, half of the specimens in each group were brushed (10 s; twice per day) with dentifrice slurries containing either 1,450 ppm (e.g., AmF1450) or 5,000 ppm (e.g., AmF5000). Differences in integrated mineral loss (ΔΔZ) and lesion depth (ΔLD) were calculated between values before and after pH-cycling using transversal microradiography. Results: After pH-cycling Ss showed significantly increased ΔZDT and LDDT values, indicating further demineralization. In contrast, except for one, all groups including fluoride gels/solutions showed significantly decreased ΔZDT values. Additional use of most fluoride gels/solutions significantly enhanced mineral gain, mainly in the surface area; however, acidic gels/solutions seemed to have negative effects on lesion depths. Significance: Under the present pH-cycling conditions the highly fluoridated dentifrice significantly reduced caries progression and additional application of nearly all of the fluoride gels/solutions resulted in remineralization. However, there was no difference in the remineralizing capacity of fluoride gels/solutions when used in combination with either standard or highly fluoridated dentifrices