Complementary and alternative medicine for victims of intimate partner abuse: A systematic review of use and efficacy

Objectives. To examine: (i) the extent to which victims of intimate partner abuse (IPA) use complementary and alternative medicine (CAM) and (ii) the effects of CAM on their mental health. Methods. Medline, Scopus, and Web of Science were searched for studies measuring the extent of CAM use amongst victims of IPA and trials assessing the impact of CAM on mental health amongst this population. Risk of bias was assessed using the Cochrane collaboration tool. Results. No studies measuring the level of CAM use amongst IPA victims, and only three studies assessing the effect of CAM on the mental health of this population were identified. Two studies looked at yogic breathing, while one assessed the effect of music therapy. All three studies showed some beneficial effects; however, each had a small sample, brief intervention period, and no follow-up measurement and were considered to be at high risk of bias. Conclusions. The review found little evidence for the benefits of CAM for IPA victims. Findings suggest positive effects of music therapy and yogic breathing; however, methodological limitations mean that these results should be interpreted with caution. It is important that more research into the use and effects of CAM amongst this population are undertaken. © 2014 Luke Duffy et al

Is dietary zinc protective for type 2 diabetes? Results from the Australian longitudinal study on women's health

Background: Animal studies have shown that zinc intake has protective effects against type 2 diabetes, but few studies have been conducted to examine this relationship in humans. The aim of this study is to investigate if dietary zinc is associated with risk of type 2 diabetes in a longitudinal study of mid-age Australian women. Methods: Data were collected from a cohort of women aged 45-50 years at baseline, participating in the Australian Longitudinal Study on Women's Health. A validated food frequency questionnaire was used to assess dietary intake and other nutrients. Predictors of 6-year incidence of type 2 diabetes were examined using multivariable logistic regression. Results: From 8921 participants, 333 incident cases of type 2 diabetes were identified over 6 years of follow-up. After adjustment for dietary and non-dietary factors, the highest quintile dietary zinc intake had almost half the odds of developing type 2 diabetes (OR = 0.50, 95% C.I. 0.32-0.77) compared with the lowest quintile. Similar findings were observed for the zinc/iron ratio; the highest quintile had half the odds of developing type 2 diabetes (OR = 0.50, 95% C.I 0.30-0.83) after multivariable adjustment of covariates. Conclusions: Higher total dietary zinc intake and high zinc/iron ratio are associated with lower risk of type 2 diabetes in women. This finding is a positive step towards further research to determine if zinc supplementation may reduce the risk of developing type 2 diabetes. © 2013 Vashum et al.; licensee BioMed Central Ltd

An evaluation of methods used to assess fat cover in live cattle

[Summary]: Five methods of assessing subcutaneous fat cover were compared using male and female Bos indicus - Bos taurus beef cattle. None of the methods was able to accurately predict fat depth. The ESTD FAT technique has the greatest potential because it requires minimal handling. Use of the TRANS site may assist to improve accuracy with the ESTD FAT technique

A tactile method modified to assess the finish of beef cattle in marketable condition in north Queensland

Three methods of assessing the fat finish of marketable beef cattle were compared using Bos indicus crossbred cattle. The methods were: the Queensland Livestock Market Reporting Service, the National Beef Recording Scheme and a modified tactile method (MT) of the Meat and Livestock Commission. None of the three methods was able to predict accurately the fat depth at the 13th rib of the carcass. The highest correlation between finish score and fat depth was r = 0.568 for one operator using the MT method. However, wehn data from the MT method were examined it was found that mean fat depth at the 13th rib increased (P<0.05) with increasing finish score in two of the three liveweight categories studied. It is suggested that scoring individual animals on finish is no more accurate than weighing and allocating them to finish categories on the basis of liveweight

Miscarriage, Preterm Delivery, and Stillbirth: Large Variations in Rates within a Cohort of Australian Women

Objectives We aimed to use simple clinical questions to group women and provide their specific rates of miscarriage, preterm delivery, and stillbirth for reference. Further, our purpose was to describe who has experienced particularly low or high rates of each event. Methods Data were collected as part of the Australian Longitudinal Study on Women's Health, a national prospective cohort. Reproductive histories were obtained from 5806 women aged 31–36 years in 2009, who had self-reported an outcome for one or more pregnancy. Age at first birth, number of live births, smoking status, fertility problems, use of in vitro fertilisation (IVF), education and physical activity were the variables that best separated women into groups for calculating the rates of miscarriage, preterm delivery, and stillbirth. Results Women reported 10,247 live births, 2544 miscarriages, 1113 preterm deliveries, and 113 stillbirths. Miscarriage was correlated with stillbirth (r = 0.09, P<0.001). The calculable rate of miscarriage ranged from 11.3 to 86.5 miscarriages per 100 live births. Women who had high rates of miscarriage typically had fewer live births, were more likely to smoke and were more likely to have tried unsuccessfully to conceive for ≥12 months. The highest proportion of live preterm delivery (32.2%) occurred in women who had one live birth, had tried unsuccessfully to conceive for ≥12 months, had used IVF, and had 12 years education or equivalent. Women aged 14–19.99 years at their first birth and reported low physical activity had 38.9 stillbirths per 1000 live births, compared to the lowest rate at 5.5 per 1000 live births. Conclusion Different groups of women experience vastly different rates of each adverse pregnancy event. We have used simple questions and established reference data that will stratify women into low- and high-rate groups, which may be useful in counselling those who have experienced miscarriage, preterm delivery, or stillbirth, plus women with fertility intent

Cargo scheduling decision support for offshore oil and gas production: a case study

Woodside Energy Ltd (Woodside), Australia’s largest independent oil and gas company, operates multiple oil and gas facilities off the coast of Western Australia. These facilities require regular cargo shipments from supply vessels based in Karratha, Western Australia. In this paper, we describe a decision support model for scheduling the cargo shipments to minimize travel cost and trip duration, subject to various operational restrictions including vessel capacities, cargo demands at the facilities, time windows at the facilities, and base opening times. The model is a type of non-standard vehicle routing problem involving multiple supply vessels—a primary supply vessel that visits every facility during a round trip taking at most 1 week, and other supply vessels that are used on an ad hoc basis when the primary vessel cannot meet all cargo demands. We validate the model via test simulations using real data provided by Woodside

Control parameterization for optimal control problems with continuous inequality constraints: New convergence results

Control parameterization is a powerful numerical technique for solving optimal control problems with general nonlinear constraints. The main idea of control parameterization is to discretize the control space by approximating the control by a piecewise-constant or piecewise-linear function, thereby yielding an approximate nonlinear programming problem. This approximate problem can then be solved using standard gradient-based optimization techniques. In this paper, we consider the control parameterization method for a class of optimal control problems in which the admissible controls are functions of bounded variation and the state and control are subject to continuous inequality constraints. We show that control parameterization generates a sequence of suboptimal controls whose costs converge to the true optimal cost. This result has previously only been proved for the case when the admissible controls are restricted to piecewise continuous functions

Cyclotomic integers, fusion categories, and subfactors

Dimensions of objects in fusion categories are cyclotomic integers, hence number theoretic results have implications in the study of fusion categories and finite depth subfactors. We give two such applications. The first application is determining a complete list of numbers in the interval (2, 76/33) which can occur as the Frobenius-Perron dimension of an object in a fusion category. The smallest number on this list is realized in a new fusion category which is constructed in the appendix written by V. Ostrik, while the others are all realized by known examples. The second application proves that in any family of graphs obtained by adding a 2-valent tree to a fixed graph, either only finitely many graphs are principal graphs of subfactors or the family consists of the A_n or D_n Dynkin diagrams. This result is effective, and we apply it to several families arising in the classification of subfactors of index less then 5.Comment: 47 pages, with an appendix by Victor Ostri

A unified parameter identification method for nonlinear time-delay systems

This paper deals with the problem of identifying unknown time-delays and model parameters in a general nonlinear time-delay system. We propose a unified computational approach that involves solving a dynamic optimization problem, whose cost function measures the discrepancy between predicted and observed system output, to determine optimal values for the unknown quantities. Our main contribution is to show that the partial derivatives of this cost function can be computed by solving a set of auxiliary time-delay systems. On this basis, the parameter identification problem can be solved using existing gradient-based optimization techniques. We conclude the paper with two numerical simulations

The control parameterization method for nonlinear optimal control: A survey

The control parameterization method is a popular numerical technique for solving optimal control problems. The main idea of control parameterization is to discretize the control space by approximating the control function by a linear combination of basis functions. Under this approximation scheme, the optimal control problem is reduced to an approximate nonlinear optimization problem with a finite number of decision variables. This approximate problem can then be solved using nonlinear programming techniques. The aim of this paper is to introduce the fundamentals of the control parameterization method and survey its various applications to non-standard optimal control problems. Topics discussed include gradient computation, numerical convergence, variable switching times, and methods for handling state constraints. We conclude the paper with some suggestions for future research