Applications of Artificial Neural Network (ANN) method for performance prediction of the effect of a vertical 90° bend on an air-silicone oil flow

Knowledge of how the presence of a bend can change the flow patterns of a gas–liquid mixture is important for the design of multiphase flow systems, particularly to prevent burn-out and erosion–corrosion. Burn-out and erosion–corrosion both have serious implications for heat and mass transfer. The objective of this work therefore is to train an artificial neural network (ANN), a powerful interpolation technique, to predict the effect of a vertical 90o bend on an air–silicone oil mixture over a wide range of flow rates. Experimental data for training, validation, testing and final prediction were obtained using advanced instrumentation, wire mesh sensor (WMS) and high speed camera. The performance of the models were evaluated using the mean square error (MSE), average absolute relative error (MAE), Chi square test (X2) and cross correlation coefficients (R). The performance discriminator X2 for prediction of average void fraction is 2.57e-5 and that for probability density function (PDF) of void fraction MAE is 0.0028 for best performing models. The well trained ANN is then used to predict the effects of the two input parameters individually. The predicted results show that for the before the bend scenario, the most effective input parameter that reflects a change in flow pattern is the gas superficial velocity. On the other hand, the most unfavourable output parameter to measure after the bend is the average void fraction based on the fact that the flow near the bend is a developing one

Experimental study of the hydrodynamic behaviour of slug flow in a vertical riser

This paper presents an investigation of the hydrodynamics of slug flow in a vertical 67 mm internal diameter riser. The slug flow regime was generated using a multiphase air–silicone oil mixture over a range of gas (0.42<USG<1.35 m/s) and liquid (0.05<USL<0.38 m/s) superficial velocities. Electrical capacitance tomography (ECT) was used to determine: the velocities of the Taylor bubbles and liquid slugs, the slug frequencies, the lengths of Taylor bubbles and the liquid slugs, the void fractions within the Taylor bubbles and liquid slugs and the liquid film thicknesses. A differential pressure transducer was used to measure the pressure drops along the length of the riser. It was found that the translational velocity of a Taylor bubble (the structure velocity) was strongly dependent on the mixture superficial velocity. As the gas superficial velocity, was increased, the void fraction and the lengths of the liquid slugs and the Taylor bubbles were observed to increase. The increase in gas superficial velocity causes an increase in the frictional pressure drop within the pipe, whilst the total pressure drop (which is a sum of the hydrostatic and frictional pressure drop) along the length of the riser decreases. In addition, the frequencies of the liquid slugs were observed to increase as the liquid superficial velocity increases, but to be weakly dependant on the gas superficial velocity. The manual counting method for the determination of slug frequency was found to be in good agreement with the power spectral density (PSD) computed method

Prospects for local co-governance

British local authorities and their partners are increasingly developing new ways of working together with local communities. The nature of this co-working, however, is complex, multi-faceted and little understood. This article argues for greater clarity of thinking on the topic, by analysing this co-working as a form of political co-governance, and drawing attention in particular to issues of scale and democracy. Using evidence from a study of 43 local authority areas, 16 authorities are identified where co-governance is practised, following three main types of approach: service-influencing, service-delivering and parish council developing. It is concluded that strengthening political co-governance is essential for a healthy democracy

Interpreting planners' talk about change: An exploratory study.

Talk by planners about major changes (‘reform’) in a particular planning regime is the focus of this article. Change in planning in the United Kingdom has been a recurrent theme in planning practice and research. However, there is little looking at practitioners both in the public and the private sectors in relation to change. Also, theory development has been limited and the interpretive link between institutional change, organisational change and planners’ situated agency could be strengthened. This article aims to add new dimensions to the current debate by looking at planners in both the public and the private sectors in Wales; by adopting a more open-ended approach requiring planners to generate ideas and display a perspective on planning; and by linking theories of institutional and organisational change with the model of actors’ agency developed by Bevir and Rhodes to form an interpretive frame. With reflections stemming from an exploratory case in Wales, the article seeks also to contribute to debates on planning in the United Kingdom and beyond, reaching to new-institutionalist theory and interpretive ontologie

Developing a framework for the analysis of power through depotentia

Stakeholder participation in tourism policy-making is usually perceived as providing a means of empowerment. However participatory processes drawing upon stakeholders from traditionally empowered backgrounds may provide the means of removing empowerment from stakeholders. Such an outcome would be in contradiction to the claims that participatory processes improve both inclusivity and sustainability. In order to form an understanding of the sources through which empowerment may be removed, an analytical perspective has been developed deriving from Lukes�s views of power dating from 1974. This perspective considers the concept of depotentia as the removal of �power to� without speculating upon the underlying intent and also provides for the multidimensionality of power to be examined within a single study. The application of this analytical perspective has been tested upon findings of the government-commissioned report of the Countryside and Community Research Unit in 2005. The survey and report investigated the progress of Local Access Forums in England created in response to the Countryside and Rights of Way Act 2000. Consideration of the data from this perspective permits the classification of individual sources of depotentia which can each be addressed and potentially enable stakeholder groups to reverse loss of empowerment where it has occurred

Strongly Enhanced Current Densities in Superconducting Coated Conductors of YBa2Cu3O7-x + BaZrO3

There are numerous potential applications for superconducting tapes, based on YBa2Cu3O7-x (YBCO) films coated onto metallic substrates. A long established goal of more than 15 years has been to understand the magnetic flux pinning mechanisms which allow films to maintain high current densities out to high magnetic fields. In fact, films carry 1-2 orders of magnitude higher current densities than any other form of the material. For this reason, the idea of further improving pinning has received little attention. Now that commercialisation of conductors is much closer, for both better performance and lower fabrication costs, an important goal is to achieve enhanced pinning in a practical way. In this work, we demonstrate a simple and industrially scaleable route which yields a 1.5 to 5-fold improvement in the in-field current densities of already-high-quality conductors

The South West Area Mesothelioma and Pemetrexed trial - A multi-centre prospective observational study evaluating novel markers of chemotherapy response and prognostication

Background:Robust markers that predict prognosis and detect early treatment response in malignant pleural mesothelioma (MPM) would enhance patient care.Methods:Consecutive patients with MPM who were considered fit for first-line chemotherapy were prospectively recruited. Patients of similar performance status opting for best supportive care were included as a comparator group. Baseline and interval CT, PET-CT and serum markers (mesothelin, fibulin-3 and neutrophil–lymphocyte ratio (NLR)) were obtained, and patients followed up for a minimum 12 months.Findings:Seventy-three patients were recruited (58 chemotherapy/15 comparator arm). Baseline TGV (total glycolytic volume on PET-CT) was an independent predictor of worse overall survival (OS) (P=0.001). Change in interval TGV(baseline/after two cycles of chemotherapy) did not predict OS or chemotherapy response on CT. Baseline NL

Numerical Investigation of Boundary Conditions for Moving Contact Line Problems

When boundary conditions arising from the usual hydrodynamic assumptions are applied, analyses of dynamic wetting processes lead to a well-known nonintegrable stress singularity at the dynamic contact line, necessitating new ways to model this problem. In this paper, numerical simulations for a set of representative problems are used to explore the possibility of providing material boundary conditions for predictive models of inertialess moving contact line processes. The calculations reveal that up to Capillary number Ca=0.15, the velocity along an arc of radius 10Li (Li is an inner, microscopic length scale! from the dynamic contact line is independent of the macroscopic length scale a for a.103Li , and compares well to the leading order analytical ‘‘modulated-wedge’’ flow field [R. G. Cox, J. Fluid Mech. 168, 169 (1986)] for Capillary number Ca,0.1. Systematic deviations between the numerical and analytical velocity field occur for 0.1168, 169 (1986)] is used as a boundary condition along an arc of radius R=10-2a from the dynamic contact line, agree well with those using two inner slip models for Ca\u3c0.1, with a breakdown at higher Ca. Computations in a cylindrical geometry reveal the role of azimuthal curvature effects on velocity profiles in this vicinity of dynamic contact lines. These calculations show that over an appropriate range of Ca, the velocity field and the meniscus slope in a geometry-independent region can potentially serve as material boundary conditions for models of processes containing dynamic contact lines